Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "Nothing particular important in the SoC driver updates, just the usual
  improvements to for drivers/soc and a couple of subsystems that don't
  fit anywhere else:

   - The largest set of updates is for Qualcomm SoC drivers, extending
     the set of supported features for additional SoCs in the QSEECOM,
     LLCC and socinfo drivers.a

   - The ti_sci firmware driver gains support for power managment

   - The drivers/reset subsystem sees a rework of the microchip sparx5
     and amlogic reset drivers to support additional chips, plus a few
     minor updates on other platforms

   - The SCMI firmware interface driver gains support for two protocol
     extensions, allowing more flexible use of the shared memory area
     and new DT binding properties for configurability.

   - Mediatek SoC drivers gain support for power managment on the MT8188
     SoC and a new driver for DVFS.

   - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
     and a few bugfixes

   - The Hisilicon Kunpeng HCCS driver gains support for configuring
     lanes through sysfs

  Finally, there are cleanups and minor fixes for drivers/{soc, bus,
  memory}, including changing back the .remove_new callback to .remove,
  as well as a few other updates for freescale (powerpc) soc drivers,
  NXP i.MX soc drivers, cznic turris platform driver, memory controller
  drviers, TI OMAP SoC drivers, and Tegra firmware drivers"

* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
  soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
  soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
  soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
  platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
  platform: cznic: turris-omnia-mcu: Document the driver private data structure
  firmware: turris-mox-rwtm: Document the driver private data structure
  bus: Switch back to struct platform_driver::remove()
  soc: qcom: ice: Remove the device_link field in qcom_ice
  drm/msm/adreno: Setup SMMU aparture for per-process page table
  firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
  firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
  soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  soc: qcom: llcc: Flip the manual slice configuration condition
  dt-bindings: firmware: qcom,scm: Document sm8750 SCM
  firmware: qcom: uefisecapp: Allow X1E Devkit devices
  misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
  misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
  soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
  ...

drivers/firmware/qcom/qcom_scm.c

@@ -904,6 +904,32 @@ int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
 }
 EXPORT_SYMBOL_GPL(qcom_scm_restore_sec_cfg);
 
+#define QCOM_SCM_CP_APERTURE_CONTEXT_MASK	GENMASK(7, 0)
+
+bool qcom_scm_set_gpu_smmu_aperture_is_available(void)
+{
+	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP,
+					    QCOM_SCM_MP_CP_SMMU_APERTURE_ID);
+}
+EXPORT_SYMBOL_GPL(qcom_scm_set_gpu_smmu_aperture_is_available);
+
+int qcom_scm_set_gpu_smmu_aperture(unsigned int context_bank)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_MP,
+		.cmd = QCOM_SCM_MP_CP_SMMU_APERTURE_ID,
+		.arginfo = QCOM_SCM_ARGS(4),
+		.args[0] = 0xffff0000 | FIELD_PREP(QCOM_SCM_CP_APERTURE_CONTEXT_MASK, context_bank),
+		.args[1] = 0xffffffff,
+		.args[2] = 0xffffffff,
+		.args[3] = 0xffffffff,
+		.owner = ARM_SMCCC_OWNER_SIP
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL_GPL(qcom_scm_set_gpu_smmu_aperture);
+
 int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
 {
 	struct qcom_scm_desc desc = {
@@ -1742,12 +1768,16 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send);
  + any potential issues with this, only allow validated machines for now.
  */
 static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = {
+	{ .compatible = "dell,xps13-9345" },
 	{ .compatible = "lenovo,flex-5g" },
 	{ .compatible = "lenovo,thinkpad-t14s" },
 	{ .compatible = "lenovo,thinkpad-x13s", },
+	{ .compatible = "lenovo,yoga-slim7x" },
+	{ .compatible = "microsoft,arcata", },
 	{ .compatible = "microsoft,romulus13", },
 	{ .compatible = "microsoft,romulus15", },
 	{ .compatible = "qcom,sc8180x-primus" },
+	{ .compatible = "qcom,x1e001de-devkit" },
 	{ .compatible = "qcom,x1e80100-crd" },
 	{ .compatible = "qcom,x1e80100-qcp" },
 	{ }