drm/i915: move modesetting output/encoder code under display/

Add a new subdirectory for display code, and start off by moving
modesetting output/encoder code. Judging by the include changes, this is
a surprisingly clean operation.

v2:
- move intel_sdvo_regs.h too
- use tabs for Makefile	file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com

drivers/gpu/drm/i915/display/intel_dvo_dev.h

@@ -0,0 +1,140 @@
+/*
+ * Copyright © 2006 Eric Anholt
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __INTEL_DVO_DEV_H__
+#define __INTEL_DVO_DEV_H__
+
+#include <linux/i2c.h>
+
+#include <drm/drm_crtc.h>
+
+#include "i915_reg.h"
+
+struct intel_dvo_device {
+	const char *name;
+	int type;
+	/* DVOA/B/C output register */
+	i915_reg_t dvo_reg;
+	i915_reg_t dvo_srcdim_reg;
+	/* GPIO register used for i2c bus to control this device */
+	u32 gpio;
+	int slave_addr;
+
+	const struct intel_dvo_dev_ops *dev_ops;
+	void *dev_priv;
+	struct i2c_adapter *i2c_bus;
+};
+
+struct intel_dvo_dev_ops {
+	/*
+	 * Initialize the device at startup time.
+	 * Returns NULL if the device does not exist.
+	 */
+	bool (*init)(struct intel_dvo_device *dvo,
+		     struct i2c_adapter *i2cbus);
+
+	/*
+	 * Called to allow the output a chance to create properties after the
+	 * RandR objects have been created.
+	 */
+	void (*create_resources)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Turn on/off output.
+	 *
+	 * Because none of our dvo drivers support an intermediate power levels,
+	 * we don't expose this in the interfac.
+	 */
+	void (*dpms)(struct intel_dvo_device *dvo, bool enable);
+
+	/*
+	 * Callback for testing a video mode for a given output.
+	 *
+	 * This function should only check for cases where a mode can't
+	 * be supported on the output specifically, and not represent
+	 * generic CRTC limitations.
+	 *
+	 * \return MODE_OK if the mode is valid, or another MODE_* otherwise.
+	 */
+	int (*mode_valid)(struct intel_dvo_device *dvo,
+			  struct drm_display_mode *mode);
+
+	/*
+	 * Callback for preparing mode changes on an output
+	 */
+	void (*prepare)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Callback for committing mode changes on an output
+	 */
+	void (*commit)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Callback for setting up a video mode after fixups have been made.
+	 *
+	 * This is only called while the output is disabled.  The dpms callback
+	 * must be all that's necessary for the output, to turn the output on
+	 * after this function is called.
+	 */
+	void (*mode_set)(struct intel_dvo_device *dvo,
+			 const struct drm_display_mode *mode,
+			 const struct drm_display_mode *adjusted_mode);
+
+	/*
+	 * Probe for a connected output, and return detect_status.
+	 */
+	enum drm_connector_status (*detect)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Probe the current hw status, returning true if the connected output
+	 * is active.
+	 */
+	bool (*get_hw_state)(struct intel_dvo_device *dev);
+
+	/**
+	 * Query the device for the modes it provides.
+	 *
+	 * This function may also update MonInfo, mm_width, and mm_height.
+	 *
+	 * \return singly-linked list of modes or NULL if no modes found.
+	 */
+	struct drm_display_mode *(*get_modes)(struct intel_dvo_device *dvo);
+
+	/**
+	 * Clean up driver-specific bits of the output
+	 */
+	void (*destroy) (struct intel_dvo_device *dvo);
+
+	/**
+	 * Debugging hook to dump device registers to log file
+	 */
+	void (*dump_regs)(struct intel_dvo_device *dvo);
+};
+
+extern const struct intel_dvo_dev_ops sil164_ops;
+extern const struct intel_dvo_dev_ops ch7xxx_ops;
+extern const struct intel_dvo_dev_ops ivch_ops;
+extern const struct intel_dvo_dev_ops tfp410_ops;
+extern const struct intel_dvo_dev_ops ch7017_ops;
+extern const struct intel_dvo_dev_ops ns2501_ops;
+
+#endif /* __INTEL_DVO_DEV_H__ */