bybrooklyn/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-04-18 06:44:00 -04:00
Code Issues Packages Projects Releases Wiki Activity

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Browse Source 
Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support HW queue leasing, allowing containers to be granted access
     to HW queues for zero-copy operations and AF_XDP

   - Number of code moves to help the compiler with inlining. Avoid
     output arguments for returning drop reason where possible

   - Rework drop handling within qdiscs to include more metadata about
     the reason and dropping qdisc in the tracepoints

   - Remove the rtnl_lock use from IP Multicast Routing

   - Pack size information into the Rx Flow Steering table pointer
     itself. This allows making the table itself a flat array of u32s,
     thus making the table allocation size a power of two

   - Report TCP delayed ack timer information via socket diag

   - Add ip_local_port_step_width sysctl to allow distributing the
     randomly selected ports more evenly throughout the allowed space

   - Add support for per-route tunsrc in IPv6 segment routing

   - Start work of switching sockopt handling to iov_iter

   - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
     buffer size drifting up

   - Support MSG_EOR in MPTCP

   - Add stp_mode attribute to the bridge driver for STP mode selection.
     This addresses concerns about call_usermodehelper() usage

   - Remove UDP-Lite support (as announced in 2023)

   - Remove support for building IPv6 as a module. Remove the now
     unnecessary function calling indirection

  Cross-tree stuff:

   - Move Michael MIC code from generic crypto into wireless, it's
     considered insecure but some WiFi networks still need it

  Netfilter:

   - Switch nft_fib_ipv6 module to no longer need temporary dst_entry
     object allocations by using fib6_lookup() + RCU.

     Florian W reports this gets us ~13% higher packet rate

   - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
     switch the service tables to be per-net. Convert some code that
     walks the service lists to use RCU instead of the service_mutex

   - Add more opinionated input validation to lower security exposure

   - Make IPVS hash tables to be per-netns and resizable

  Wireless:

   - Finished assoc frame encryption/EPPKE/802.1X-over-auth

   - Radar detection improvements

   - Add 6 GHz incumbent signal detection APIs

   - Multi-link support for FILS, probe response templates and client
     probing

   - New APIs and mac80211 support for NAN (Neighbor Aware Networking,
     aka Wi-Fi Aware) so less work must be in firmware

  Driver API:

   - Add numerical ID for devlink instances (to avoid having to create
     fake bus/device pairs just to have an ID). Support shared devlink
     instances which span multiple PFs

   - Add standard counters for reporting pause storm events (implement
     in mlx5 and fbnic)

   - Add configuration API for completion writeback buffering (implement
     in mana)

   - Support driver-initiated change of RSS context sizes

   - Support DPLL monitoring input frequency (implement in zl3073x)

   - Support per-port resources in devlink (implement in mlx5)

  Misc:

   - Expand the YAML spec for Netfilter

  Drivers

   - Software:
      - macvlan: support multicast rx for bridge ports with shared
        source MAC address
      - team: decouple receive and transmit enablement for IEEE 802.3ad
        LACP "independent control"

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - support high order pages in zero-copy mode (for payload
           coalescing)
         - support multiple packets in a page (for systems with 64kB
           pages)
      - Broadcom 25-400GE (bnxt):
         - implement XDP RSS hash metadata extraction
         - add software fallback for UDP GSO, lowering the IOMMU cost
      - Broadcom 800GE (bnge):
         - add link status and configuration handling
         - add various HW and SW statistics
      - Marvell/Cavium:
         - NPC HW block support for cn20k
      - Huawei (hinic3):
         - add mailbox / control queue
         - add rx VLAN offload
         - add driver info and link management

   - Ethernet NICs:
      - Marvell/Aquantia:
         - support reading SFP module info on some AQC100 cards
      - Realtek PCI (r8169):
         - add support for RTL8125cp
      - Realtek USB (r8152):
         - support for the RTL8157 5Gbit chip
         - add 2500baseT EEE status/configuration support

   - Ethernet NICs embedded and off-the-shelf IP:
      - Synopsys (stmmac):
         - cleanup and reorganize SerDes handling and PCS support
         - cleanup descriptor handling and per-platform data
         - cleanup and consolidate MDIO defines and handling
         - shrink driver memory use for internal structures
         - improve Tx IRQ coalescing
         - improve TCP segmentation handling
         - add support for Spacemit K3
      - Cadence (macb):
         - support PHYs that have inband autoneg disabled with GEM
         - support IEEE 802.3az EEE
         - rework usrio capabilities and handling
      - AMD (xgbe):
         - improve power management for S0i3
         - improve TX resilience for link-down handling

   - Virtual:
      - Google cloud vNIC:
         - support larger ring sizes in DQO-QPL mode
         - improve HW-GRO handling
         - support UDP GSO for DQO format
      - PCIe NTB:
         - support queue count configuration

   - Ethernet PHYs:
      - automatically disable PHY autonomous EEE if MAC is in charge
      - Broadcom:
         - add BCM84891/BCM84892 support
      - Micrel:
         - support for LAN9645X internal PHY
      - Realtek:
         - add RTL8224 pair order support
         - support PHY LEDs on RTL8211F-VD
         - support spread spectrum clocking (SSC)
      - Maxlinear:
         - add PHY-level statistics via ethtool

   - Ethernet switches:
      - Maxlinear (mxl862xx):
         - support for bridge offloading
         - support for VLANs
         - support driver statistics

   - Bluetooth:
      - large number of fixes and new device IDs
      - Mediatek:
         - support MT6639 (MT7927)
         - support MT7902 SDIO

   - WiFi:
      - Intel (iwlwifi):
         - UNII-9 and continuing UHR work
      - MediaTek (mt76):
         - mt7996/mt7925 MLO fixes/improvements
         - mt7996 NPU support (HW eth/wifi traffic offload)
      - Qualcomm (ath12k):
         - monitor mode support on IPQ5332
         - basic hwmon temperature reporting
         - support IPQ5424
      - Realtek:
         - add USB RX aggregation to improve performance
         - add USB TX flow control by tracking in-flight URBs

   - Cellular:
      - IPA v5.2 support"

* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
  net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
  wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
  wireguard: allowedips: remove redundant space
  tools: ynl: add sample for wireguard
  wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
  MAINTAINERS: Add netkit selftest files
  selftests/net: Add additional test coverage in nk_qlease
  selftests/net: Split netdevsim tests from HW tests in nk_qlease
  tools/ynl: Make YnlFamily closeable as a context manager
  net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
  net: airoha: Fix VIP configuration for AN7583 SoC
  net: caif: clear client service pointer on teardown
  net: strparser: fix skb_head leak in strp_abort_strp()
  net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
  selftests/bpf: add test for xdp_master_redirect with bond not up
  net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
  net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
  sctp: disable BH before calling udp_tunnel_xmit_skb()
  sctp: fix missing encap_port propagation for GSO fragments
  net: airoha: Rely on net_device pointer in ETS callbacks
  ...
This commit is contained in:
Linus Torvalds
2026-04-14 18:36:10 -07:00
parent f5ad410100 35c2c39832
commit 91a4855d6c
1687 changed files with 73589 additions and 26612 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
CREDITS
View File

@@ -3592,6 +3592,16 @@ E: wsalamon@tislabs.com
E: wsalamon@nai.com
D: portions of the Linux Security Module (LSM) framework and security modules
N: Salil Mehta
E: salil.mehta@opnsrc.net
D: Co-authored Huawei/HiSilicon Kunpeng 920 SoC HNS3 PF and VF 100G
D: Ethernet driver
D: Co-authored Huawei/HiSilicon Kunpeng 916 SoC HNS 10G Ethernet
D: driver enhancements
D: Maintained Huawei/HiSilicon HNS and HNS3 10G/100G Ethernet drivers
D: for Kunpeng 916 family, 920 family of SoCs
S: Cambridge, Cambridgeshire, United Kingdom
N: Robert Sanders
E: gt8134b@prism.gatech.edu
D: Dosemu

28
Documentation/admin-guide/sysctl/net.rst
View File

@@ -602,3 +602,31 @@ it does not modify the current namespace or any existing children.
A namespace with ``ns_mode`` set to ``local`` cannot change
``child_ns_mode`` to ``global`` (returns ``-EPERM``).
g2h_fallback
------------
Controls whether connections to CIDs not owned by the host-to-guest (H2G)
transport automatically fall back to the guest-to-host (G2H) transport.
When enabled, if a connect targets a CID that the H2G transport (e.g.
vhost-vsock) does not serve, or if no H2G transport is loaded at all, the
connection is routed via the G2H transport (e.g. virtio-vsock) instead. This
allows a host running both nested VMs (via vhost-vsock) and sibling VMs
reachable through the hypervisor (e.g. Nitro Enclaves) to address both using
a single CID space, without requiring applications to set
``VMADDR_FLAG_TO_HOST``.
When the fallback is taken, ``VMADDR_FLAG_TO_HOST`` is automatically set on
the remote address so that userspace can determine the path via
``getpeername()``.
Note: With this sysctl enabled, user space that attempts to talk to a guest
CID which is not implemented by the H2G transport will create host vsock
traffic. Environments that rely on H2G-only isolation should set it to 0.
Values:
- 0 - Connections to CIDs <= 2 or with VMADDR_FLAG_TO_HOST use G2H;
all others use H2G (or fail with ENODEV if H2G is not loaded).
- 1 - Connections to CIDs not owned by H2G fall back to G2H. (default)

13
Documentation/devicetree/bindings/dpll/dpll-pin.yaml
View File

@@ -36,6 +36,19 @@ properties:
description: String exposed as the pin board label
$ref: /schemas/types.yaml#/definitions/string
ref-sync-sources:
description: |
List of phandles to input pins that can serve as the sync source
in a Reference-Sync pair with this pin acting as the clock source.
A Ref-Sync pair consists of a clock reference and a low-frequency
sync signal. The DPLL locks to the clock reference but
phase-aligns to the sync reference.
Only valid for input pins. Each referenced pin must be a
different input pin on the same device.
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
supported-frequencies-hz:
description: List of supported frequencies for this pin, expressed in Hz.

30
Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
View File

@@ -52,11 +52,19 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
pin@0 { /* REF0P */
sync0: pin@0 { /* REF0P - 1 PPS sync source */
reg = <0>;
connection-type = "ext";
label = "Input 0";
supported-frequencies-hz = /bits/ 64 <1 1000>;
label = "SMA1";
supported-frequencies-hz = /bits/ 64 <1>;
};
pin@1 { /* REF0N - clock source, can pair with sync0 */
reg = <1>;
connection-type = "ext";
label = "SMA2";
supported-frequencies-hz = /bits/ 64 <10000 10000000>;
ref-sync-sources = <&sync0>;
};
};
@@ -90,11 +98,19 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
pin@0 { /* REF0P */
sync1: pin@0 { /* REF0P - 1 PPS sync source */
reg = <0>;
connection-type = "ext";
label = "Input 0";
supported-frequencies-hz = /bits/ 64 <1 1000>;
connection-type = "gnss";
label = "GNSS_1PPS_IN";
supported-frequencies-hz = /bits/ 64 <1>;
};
pin@1 { /* REF0N - clock source */
reg = <1>;
connection-type = "gnss";
label = "GNSS_10M_IN";
supported-frequencies-hz = /bits/ 64 <10000000>;
ref-sync-sources = <&sync1>;
};
};

8
Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
View File

@@ -44,6 +44,14 @@ properties:
signals a pending RX interrupt.
maxItems: 1
microchip,xstbyen:
type: boolean
description:
If present, configure the INT0/GPIO0/XSTBY pin as transceiver standby
control. The pin is driven low when the controller is active and high
when it enters Sleep mode, allowing automatic standby control of an
external CAN transceiver connected to this pin.
spi-max-frequency:
description:
Must be half or less of "clocks" frequency.

90
Documentation/devicetree/bindings/net/cdns,macb.yaml
View File

@@ -70,6 +70,14 @@ properties:
- microchip,sama7d65-gem # Microchip SAMA7D65 gigabit ethernet interface
- const: microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface
- items:
- const: microchip,pic64hpsc-gem # Microchip PIC64-HPSC
- const: cdns,gem
- items:
- const: microchip,pic64hx-gem # Microchip PIC64HX
- const: microchip,pic64hpsc-gem # Microchip PIC64-HPSC
- const: cdns,gem
reg:
minItems: 1
items:
@@ -122,10 +130,23 @@ properties:
cdns,refclk-ext:
type: boolean
deprecated: true
description: |
This selects if the REFCLK for RMII is provided by an external source.
For RGMII mode this selects if the 125MHz REF clock is provided by an external
source.
This property has been replaced by cdns,refclk-source, as it only works
for devices that use an internal reference clock by default.
cdns,refclk-source:
$ref: /schemas/types.yaml#/definitions/string
enum:
- internal
- external
description:
This selects if the REFCLK for RMII is provided by an external source.
For RGMII mode this selects if the 125MHz REF clock is provided by an external
source.
Select whether or not the refclk for RGMII or RMII is provided by an
internal or external source. The default is device specific.
cdns,rx-watermark:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -137,6 +158,12 @@ properties:
that need to be filled, before the forwarding process is activated.
Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes.
cdns,timer-adjust:
type: boolean
description:
Set when the hardware is operating in timer-adjust mode, where the timer
is controlled by the gem_tsu_inc_ctrl and gem_tsu_ms inputs.
'#address-cells':
const: 1
@@ -186,6 +213,15 @@ allOf:
properties:
reg:
maxItems: 1
- if:
not:
properties:
compatible:
contains:
const: microchip,mpfs-macb
then:
properties:
cdns,timer-adjust: false
- if:
properties:
@@ -196,6 +232,54 @@ allOf:
required:
- phys
- if:
properties:
compatible:
contains:
const: microchip,pic64hpsc-gem
then:
patternProperties:
"^ethernet-phy@[0-9a-f]$": false
properties:
mdio: false
- if:
not:
properties:
compatible:
contains:
enum:
- microchip,sama7g5-gem
- microchip,sama7g5-emac
then:
properties:
cdns,refclk-source: false
- if:
not:
properties:
compatible:
contains:
const: microchip,sama7g5-gem
then:
properties:
cdns,refclk-ext: false
- if:
properties:
compatible:
contains:
enum:
- microchip,sama7g5-emac
then:
properties:
cdns,refclk-source:
default: external
else:
properties:
cdns,refclk-source:
default: internal
unevaluatedProperties: false
examples:

1
Documentation/devicetree/bindings/net/dsa/maxlinear,mxl862xx.yaml
View File

@@ -110,7 +110,6 @@ examples:
port@9 {
reg = <9>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "usxgmii";

2
Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
View File

@@ -143,8 +143,6 @@ allOf:
else:
properties:
spi-cpha: false
required:
- spi-cpol
unevaluatedProperties: false

14
Documentation/devicetree/bindings/net/ethernet-phy.yaml
View File

@@ -126,6 +126,20 @@ properties:
e.g. wrong bootstrap configuration caused by issues in PCB
layout design.
enet-phy-pair-order:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
description:
For normal (0) or reverse (1) order of the pairs (ABCD -> DCBA).
enet-phy-pair-polarity:
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 0xf
description:
A bitmap to describe pair polarity swap. Bit 0 to swap polarity of pair A,
bit 1 to swap polarity of pair B, bit 2 to swap polarity of pair C and bit
3 to swap polarity of pair D.
eee-broken-100tx:
$ref: /schemas/types.yaml#/definitions/flag
description:

6
Documentation/devicetree/bindings/net/micrel.yaml
View File

@@ -51,9 +51,10 @@ properties:
bits that are currently supported:
KSZ8001: register 0x1e, bits 15..14
KSZ8041: register 0x1e, bits 15..14
KSZ8021: register 0x1f, bits 5..4
KSZ8031: register 0x1f, bits 5..4
KSZ8041: register 0x1e, bits 15..14
KSZ8041RNLI: register 0x1e, bits 15..14
KSZ8051: register 0x1f, bits 5..4
KSZ8081: register 0x1f, bits 5..4
KSZ8091: register 0x1f, bits 5..4
@@ -80,9 +81,10 @@ allOf:
contains:
enum:
- ethernet-phy-id0022.1510
- ethernet-phy-id0022.1537
- ethernet-phy-id0022.1550
- ethernet-phy-id0022.1555
- ethernet-phy-id0022.1556
- ethernet-phy-id0022.1550
- ethernet-phy-id0022.1560
- ethernet-phy-id0022.161a
then:

68
Documentation/devicetree/bindings/net/microchip,pic64hpsc-mdio.yaml Normal file
View File

@@ -0,0 +1,68 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/microchip,pic64hpsc-mdio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip PIC64-HPSC/HX MDIO controller
maintainers:
- Charles Perry <charles.perry@microchip.com>
description:
This is the MDIO bus controller present in Microchip PIC64-HPSC/HX SoCs. It
supports C22 and C45 register access and is named "MDIO Initiator" in the
documentation.
allOf:
- $ref: mdio.yaml#
properties:
compatible:
oneOf:
- const: microchip,pic64hpsc-mdio
- items:
- const: microchip,pic64hx-mdio
- const: microchip,pic64hpsc-mdio
reg:
maxItems: 1
clocks:
maxItems: 1
clock-frequency:
default: 2500000
interrupts:
maxItems: 1
required:
- compatible
- reg
- clocks
- interrupts
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
mdio@4000c21e000 {
compatible = "microchip,pic64hpsc-mdio";
reg = <0x400 0x0c21e000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&svc_clk>;
interrupt-parent = <&saplic0>;
interrupts = <168 IRQ_TYPE_LEVEL_HIGH>;
ethernet-phy@0 {
reg = <0>;
};
};
};

1
Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
View File

@@ -18,6 +18,7 @@ properties:
- nxp,nq310
- nxp,pn547
- nxp,pn553
- nxp,pn557
- const: nxp,nxp-nci-i2c
enable-gpios:

140
Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml Normal file
View File

@@ -0,0 +1,140 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/nuvoton,ma35d1-dwmac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Nuvoton DWMAC glue layer controller
maintainers:
- Joey Lu <yclu4@nuvoton.com>
description:
Nuvoton 10/100/1000Mbps Gigabit Ethernet MAC Controller is based on
Synopsys DesignWare MAC (version 3.73a).
select:
properties:
compatible:
contains:
enum:
- nuvoton,ma35d1-dwmac
required:
- compatible
allOf:
- $ref: snps,dwmac.yaml#
properties:
compatible:
items:
- const: nuvoton,ma35d1-dwmac
- const: snps,dwmac-3.70a
reg:
maxItems: 1
description:
Register range should be one of the GMAC interface.
interrupts:
maxItems: 1
clocks:
items:
- description: MAC clock
- description: PTP clock
clock-names:
items:
- const: stmmaceth
- const: ptp_ref
nuvoton,sys:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to access syscon registers.
- description: GMAC interface ID.
enum:
- 0
- 1
description:
A phandle to the syscon with one argument that configures system registers
for MA35D1's two GMACs. The argument specifies the GMAC interface ID.
resets:
maxItems: 1
reset-names:
items:
- const: stmmaceth
phy-mode:
enum:
- rmii
- rgmii
- rgmii-id
- rgmii-txid
- rgmii-rxid
tx-internal-delay-ps:
default: 0
minimum: 0
maximum: 2000
description:
RGMII TX path delay used only when PHY operates in RGMII mode with
internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
Allowed values are from 0 to 2000.
rx-internal-delay-ps:
default: 0
minimum: 0
maximum: 2000
description:
RGMII RX path delay used only when PHY operates in RGMII mode with
internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
Allowed values are from 0 to 2000.
required:
- clocks
- clock-names
- nuvoton,sys
- resets
- reset-names
- phy-mode
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
ethernet@40120000 {
compatible = "nuvoton,ma35d1-dwmac", "snps,dwmac-3.70a";
reg = <0x40120000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
clock-names = "stmmaceth", "ptp_ref";
nuvoton,sys = <&sys 0>;
resets = <&sys MA35D1_RESET_GMAC0>;
reset-names = "stmmaceth";
snps,multicast-filter-bins = <0>;
snps,perfect-filter-entries = <8>;
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
phy-mode = "rgmii-id";
phy-handle = <&eth_phy0>;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
reg = <0>;
};
};
};

47
Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
View File

@@ -1,5 +1,5 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright 2021-2024 NXP
# Copyright 2021-2026 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/nxp,s32-dwmac.yaml#
@@ -16,6 +16,8 @@ description:
the SoC S32R45 has two instances. The devices can use RGMII/RMII/MII
interface over Pinctrl device or the output can be routed
to the embedded SerDes for SGMII connectivity.
The DWMAC instances have connected all RX/TX queues interrupts,
enabling load balancing of data traffic across all CPU cores.
properties:
compatible:
@@ -45,10 +47,25 @@ properties:
FlexTimer Modules connect to GMAC_0.
interrupts:
maxItems: 1
minItems: 1
maxItems: 11
interrupt-names:
const: macirq
oneOf:
- items:
- const: macirq
- items:
- const: macirq
- const: tx-queue-0
- const: rx-queue-0
- const: tx-queue-1
- const: rx-queue-1
- const: tx-queue-2
- const: rx-queue-2
- const: tx-queue-3
- const: rx-queue-3
- const: tx-queue-4
- const: rx-queue-4
clocks:
items:
@@ -88,8 +105,28 @@ examples:
<0x0 0x4007c004 0x0 0x4>; /* GMAC_0_CTRL_STS */
nxp,phy-sel = <&gpr 0x4>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
/* CHN 0: tx, rx */
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
/* CHN 1: tx, rx */
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
/* CHN 2: tx, rx */
<GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
/* CHN 3: tx, rx */
<GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
/* CHN 4: tx, rx */
<GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq",
"tx-queue-0", "rx-queue-0",
"tx-queue-1", "rx-queue-1",
"tx-queue-2", "rx-queue-2",
"tx-queue-3", "rx-queue-3",
"tx-queue-4", "rx-queue-4";
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
clocks = <&clks 24>, <&clks 17>, <&clks 16>, <&clks 15>;

12
Documentation/devicetree/bindings/net/qcom,ipa.yaml
View File

@@ -44,6 +44,7 @@ properties:
compatible:
oneOf:
- enum:
- qcom,milos-ipa
- qcom,msm8998-ipa
- qcom,sc7180-ipa
- qcom,sc7280-ipa
@@ -53,6 +54,10 @@ properties:
- qcom,sm6350-ipa
- qcom,sm8350-ipa
- qcom,sm8550-ipa
- items:
- enum:
- qcom,qcm2290-ipa
- const: qcom,sc7180-ipa
- items:
- enum:
- qcom,sm8650-ipa
@@ -165,6 +170,13 @@ properties:
initializing IPA hardware. Optional, and only used when
Trust Zone performs early initialization.
sram:
maxItems: 1
description:
A reference to an additional region residing in IMEM (special
on-chip SRAM), which is accessed by the IPA firmware and needs
to be IOMMU-mapped from the OS.
required:
- compatible
- iommus

19
Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
View File

@@ -40,15 +40,30 @@ properties:
leds: true
realtek,aldps-enable:
type: boolean
description:
Enable ALDPS mode, ALDPS mode default is disabled after hardware reset.
realtek,clkout-disable:
type: boolean
description:
Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset.
realtek,aldps-enable:
realtek,clkout-ssc-enable:
type: boolean
description:
Enable ALDPS mode, ALDPS mode default is disabled after hardware reset.
Enable CLKOUT SSC mode, CLKOUT SSC mode default is disabled after hardware reset.
realtek,rxc-ssc-enable:
type: boolean
description:
Enable RXC SSC mode, RXC SSC mode default is disabled after hardware reset.
realtek,sysclk-ssc-enable:
type: boolean
description:
Enable SYSCLK SSC mode, SYSCLK SSC mode default is disabled after hardware reset.
wakeup-source:
type: boolean

21
Documentation/devicetree/bindings/net/snps,dwmac.yaml
View File

@@ -69,6 +69,7 @@ properties:
- ingenic,x2000-mac
- loongson,ls2k-dwmac
- loongson,ls7a-dwmac
- nuvoton,ma35d1-dwmac
- nxp,s32g2-dwmac
- qcom,qcs404-ethqos
- qcom,sa8775p-ethqos
@@ -109,6 +110,7 @@ properties:
- snps,dwmac-5.10a
- snps,dwmac-5.20
- snps,dwmac-5.30a
- snps,dwmac-5.40a
- snps,dwxgmac
- snps,dwxgmac-2.10
- sophgo,sg2042-dwmac
@@ -202,11 +204,8 @@ properties:
* snps,xit_frm, unlock on WoL
* snps,wr_osr_lmt, max write outstanding req. limit
* snps,rd_osr_lmt, max read outstanding req. limit
* snps,kbbe, do not cross 1KiB boundary.
* snps,blen, this is a vector of supported burst length.
* snps,fb, fixed-burst
* snps,mb, mixed-burst
* snps,rb, rebuild INCRx Burst
snps,mtl-rx-config:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -586,11 +585,6 @@ properties:
description:
max read outstanding req. limit
snps,kbbe:
$ref: /schemas/types.yaml#/definitions/flag
description:
do not cross 1KiB boundary.
snps,blen:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
@@ -603,16 +597,6 @@ properties:
description:
fixed-burst
snps,mb:
$ref: /schemas/types.yaml#/definitions/flag
description:
mixed-burst
snps,rb:
$ref: /schemas/types.yaml#/definitions/flag
description:
rebuild INCRx Burst
required:
- compatible
- reg
@@ -656,6 +640,7 @@ allOf:
- snps,dwmac-5.10a
- snps,dwmac-5.20
- snps,dwmac-5.30a
- snps,dwmac-5.40a
- snps,dwxgmac
- snps,dwxgmac-2.10
- st,spear600-gmac

102
Documentation/devicetree/bindings/net/spacemit,k3-dwmac.yaml Normal file
View File

@@ -0,0 +1,102 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/spacemit,k3-dwmac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Spacemit K3 DWMAC glue layer
maintainers:
- Inochi Amaoto <inochiama@gmail.com>
select:
properties:
compatible:
contains:
const: spacemit,k3-dwmac
required:
- compatible
properties:
compatible:
items:
- const: spacemit,k3-dwmac
- const: snps,dwmac-5.40a
reg:
maxItems: 1
clocks:
items:
- description: GMAC application clock
- description: PTP clock
- description: TX clock
clock-names:
items:
- const: stmmaceth
- const: ptp_ref
- const: tx
interrupts:
minItems: 1
items:
- description: MAC interrupt
- description: MAC wake interrupt
interrupt-names:
minItems: 1
items:
- const: macirq
- const: eth_wake_irq
resets:
maxItems: 1
reset-names:
const: stmmaceth
spacemit,apmu:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the syscon node which control the glue register
- description: offset of the control register
- description: offset of the dline register
description:
A phandle to syscon with offset to control registers for this MAC
required:
- compatible
- reg
- clocks
- clock-names
- interrupts
- interrupt-names
- resets
- reset-names
- spacemit,apmu
allOf:
- $ref: snps,dwmac.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
ethernet@cac80000 {
compatible = "spacemit,k3-dwmac", "snps,dwmac-5.40a";
reg = <0xcac80000 0x2000>;
clocks = <&syscon_apmu 66>, <&syscon_apmu 68>,
<&syscon_apmu 69>;
clock-names = "stmmaceth", "ptp_ref", "tx";
interrupts = <131 IRQ_TYPE_LEVEL_HIGH>, <276 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
resets = <&syscon_apmu 67>;
reset-names = "stmmaceth";
spacemit,apmu = <&syscon_apmu 0x384 0x38c>;
};

19
Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
View File

@@ -53,13 +53,18 @@ properties:
"#size-cells": true
compatible:
enum:
- ti,am642-cpsw-nuss
- ti,am654-cpsw-nuss
- ti,j7200-cpswxg-nuss
- ti,j721e-cpsw-nuss
- ti,j721e-cpswxg-nuss
- ti,j784s4-cpswxg-nuss
oneOf:
- enum:
- ti,am642-cpsw-nuss
- ti,am654-cpsw-nuss
- ti,j7200-cpswxg-nuss
- ti,j721e-cpsw-nuss
- ti,j721e-cpswxg-nuss
- ti,j784s4-cpswxg-nuss
- items:
- enum:
- ti,j722s-cpsw-nuss
- const: ti,am642-cpsw-nuss
reg:
maxItems: 1

1
Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
View File

@@ -42,6 +42,7 @@ properties:
- brcm,bcm4356-fmac
- brcm,bcm4359-fmac
- brcm,bcm4366-fmac
- brcm,bcm43752-fmac
- cypress,cyw4373-fmac
- cypress,cyw43012-fmac
- infineon,cyw43439-fmac

11
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
View File

@@ -171,6 +171,12 @@ properties:
Quirk specifying that the firmware expects the 8bit version
of the host capability QMI request
qcom,snoc-host-cap-skip-quirk:
type: boolean
description:
Quirk specifying that the firmware wants to skip the host
capability QMI request
qcom,xo-cal-data:
$ref: /schemas/types.yaml#/definitions/uint32
description:
@@ -292,6 +298,11 @@ allOf:
required:
- interrupts
- not:
required:
- qcom,snoc-host-cap-8bit-quirk
- qcom,snoc-host-cap-skip-quirk
examples:
# SNoC
- |

1
Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml
View File

@@ -17,6 +17,7 @@ properties:
compatible:
enum:
- qcom,ipq5332-wifi
- qcom,ipq5424-wifi
reg:
maxItems: 1

14
Documentation/devicetree/bindings/sram/qcom,imem.yaml
View File

@@ -67,6 +67,20 @@ properties:
$ref: /schemas/power/reset/syscon-reboot-mode.yaml#
patternProperties:
"^modem-tables@[0-9a-f]+$":
type: object
description:
Region containing packet processing configuration for the IP Accelerator.
properties:
reg:
maxItems: 1
required:
- reg
additionalProperties: false
"^pil-reloc@[0-9a-f]+$":
$ref: /schemas/remoteproc/qcom,pil-info.yaml#
description: Peripheral image loader relocation region

20
Documentation/driver-api/dpll.rst
View File

@@ -250,6 +250,24 @@ in the ``DPLL_A_PIN_PHASE_OFFSET`` attribute.
``DPLL_A_PHASE_OFFSET_MONITOR`` attr state of a feature
=============================== ========================
Frequency monitor
=================
Some DPLL devices may offer the capability to measure the actual
frequency of all available input pins. The attribute and current feature state
shall be included in the response message of the ``DPLL_CMD_DEVICE_GET``
command for supported DPLL devices. In such cases, users can also control
the feature using the ``DPLL_CMD_DEVICE_SET`` command by setting the
``enum dpll_feature_state`` values for the attribute.
Once enabled the measured input frequency for each input pin shall be
returned in the ``DPLL_A_PIN_MEASURED_FREQUENCY`` attribute. The value
is in millihertz (mHz), using ``DPLL_PIN_MEASURED_FREQUENCY_DIVIDER``
as the divider.
=============================== ========================
``DPLL_A_FREQUENCY_MONITOR`` attr state of a feature
=============================== ========================
Embedded SYNC
=============
@@ -411,6 +429,8 @@ according to attribute purpose.
``DPLL_A_PIN_STATE`` attr state of pin on the parent
pin
``DPLL_A_PIN_CAPABILITIES`` attr bitmask of pin capabilities
``DPLL_A_PIN_MEASURED_FREQUENCY`` attr measured frequency of
an input pin in mHz
==================================== ==================================
==================================== =================================

2
Documentation/netlink/genetlink.yaml
View File

@@ -262,7 +262,7 @@ properties:
description: Command flags.
type: array
items:
enum: [ admin-perm ]
enum: [ admin-perm, uns-admin-perm ]
dont-validate:
description: Kernel attribute validation flags.
type: array

11
Documentation/netlink/netlink-raw.yaml
View File

@@ -19,6 +19,12 @@ $defs:
type: [ string, integer ]
pattern: ^[0-9A-Za-z_-]+( - 1)?$
minimum: 0
len-or-limit:
# literal int, const name, or limit based on fixed-width type
# e.g. u8-min, u16-max, etc.
type: [ string, integer ]
pattern: ^[0-9A-Za-z_-]+$
minimum: 0
# Schema for specs
title: Protocol
@@ -270,7 +276,10 @@ properties:
type: string
min:
description: Min value for an integer attribute.
type: integer
$ref: '#/$defs/len-or-limit'
max:
description: Max value for an integer attribute.
$ref: '#/$defs/len-or-limit'
min-len:
description: Min length for a binary attribute.
$ref: '#/$defs/len-or-define'

90
Documentation/netlink/specs/devlink.yaml
View File

@@ -157,6 +157,14 @@ definitions:
entries:
-
name: entry
-
type: enum
name: resource-scope
entries:
-
name: dev
-
name: port
-
type: enum
name: reload-action
@@ -867,6 +875,22 @@ attribute-sets:
type: flag
doc: Request restoring parameter to its default value.
value: 183
-
name: index
type: uint
doc: Unique devlink instance index.
checks:
max: u32-max
-
name: resource-scope-mask
type: u32
enum: resource-scope
enum-as-flags: true
doc: |
Bitmask selecting which resource classes to include in a
resource-dump response. Bit 0 (dev) selects device-level
resources; bit 1 (port) selects port-level resources.
When absent all classes are returned.
-
name: dl-dev-stats
subset-of: devlink
@@ -1306,11 +1330,13 @@ operations:
attributes: &dev-id-attrs
- bus-name
- dev-name
- index
reply: &get-reply
value: 3
attributes:
- bus-name
- dev-name
- index
- reload-failed
- dev-stats
dump:
@@ -1329,6 +1355,7 @@ operations:
attributes: &port-id-attrs
- bus-name
- dev-name
- index
- port-index
reply:
value: 7
@@ -1353,6 +1380,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- port-type
- port-function
@@ -1370,6 +1398,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- port-flavour
- port-pci-pf-number
@@ -1404,6 +1433,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- port-split-count
@@ -1432,6 +1462,7 @@ operations:
attributes: &sb-id-attrs
- bus-name
- dev-name
- index
- sb-index
reply: &sb-get-reply
value: 13
@@ -1454,6 +1485,7 @@ operations:
attributes: &sb-pool-id-attrs
- bus-name
- dev-name
- index
- sb-index
- sb-pool-index
reply: &sb-pool-get-reply
@@ -1477,6 +1509,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- sb-index
- sb-pool-index
- sb-pool-threshold-type
@@ -1495,6 +1528,7 @@ operations:
attributes: &sb-port-pool-id-attrs
- bus-name
- dev-name
- index
- port-index
- sb-index
- sb-pool-index
@@ -1519,6 +1553,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- sb-index
- sb-pool-index
@@ -1537,6 +1572,7 @@ operations:
attributes: &sb-tc-pool-bind-id-attrs
- bus-name
- dev-name
- index
- port-index
- sb-index
- sb-pool-type
@@ -1562,6 +1598,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- sb-index
- sb-pool-index
@@ -1583,6 +1620,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- sb-index
-
@@ -1598,6 +1636,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- sb-index
-
@@ -1616,6 +1655,7 @@ operations:
attributes: &eswitch-attrs
- bus-name
- dev-name
- index
- eswitch-mode
- eswitch-inline-mode
- eswitch-encap-mode
@@ -1644,12 +1684,14 @@ operations:
attributes:
- bus-name
- dev-name
- index
- dpipe-table-name
reply:
value: 31
attributes:
- bus-name
- dev-name
- index
- dpipe-tables
-
@@ -1664,11 +1706,13 @@ operations:
attributes:
- bus-name
- dev-name
- index
- dpipe-table-name
reply:
attributes:
- bus-name
- dev-name
- index
- dpipe-entries
-
@@ -1683,10 +1727,12 @@ operations:
attributes:
- bus-name
- dev-name
- index
reply:
attributes:
- bus-name
- dev-name
- index
- dpipe-headers
-
@@ -1702,6 +1748,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- dpipe-table-name
- dpipe-table-counters-enabled
@@ -1718,6 +1765,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- resource-id
- resource-size
@@ -1727,18 +1775,30 @@ operations:
attribute-set: devlink
dont-validate: [strict]
do:
pre: devlink-nl-pre-doit
pre: devlink-nl-pre-doit-port-optional
post: devlink-nl-post-doit
request:
attributes:
- bus-name
- dev-name
reply:
- index
- port-index
reply: &resource-dump-reply
value: 36
attributes:
- bus-name
- dev-name
- index
- port-index
- resource-list
dump:
request:
attributes:
- bus-name
- dev-name
- index
- resource-scope-mask
reply: *resource-dump-reply
-
name: reload
@@ -1753,6 +1813,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- reload-action
- reload-limits
- netns-pid
@@ -1762,6 +1823,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- reload-actions-performed
-
@@ -1776,6 +1838,7 @@ operations:
attributes: &param-id-attrs
- bus-name
- dev-name
- index
- param-name
reply: &param-get-reply
attributes: *param-id-attrs
@@ -1797,6 +1860,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- param-name
- param-type
# param-value-data is missing here as the type is variable
@@ -1816,6 +1880,7 @@ operations:
attributes: &region-id-attrs
- bus-name
- dev-name
- index
- port-index
- region-name
reply: &region-get-reply
@@ -1840,6 +1905,7 @@ operations:
attributes: &region-snapshot-id-attrs
- bus-name
- dev-name
- index
- port-index
- region-name
- region-snapshot-id
@@ -1870,6 +1936,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- region-name
- region-snapshot-id
@@ -1881,6 +1948,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- region-name
@@ -1930,6 +1998,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- info-driver-name
- info-serial-number
- info-version-fixed
@@ -1951,6 +2020,7 @@ operations:
attributes: &health-reporter-id-attrs
- bus-name
- dev-name
- index
- port-index
- health-reporter-name
reply: &health-reporter-get-reply
@@ -1973,6 +2043,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index
- health-reporter-name
- health-reporter-graceful-period
@@ -2043,6 +2114,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- flash-update-file-name
- flash-update-component
- flash-update-overwrite-mask
@@ -2060,6 +2132,7 @@ operations:
attributes: &trap-id-attrs
- bus-name
- dev-name
- index
- trap-name
reply: &trap-get-reply
value: 63
@@ -2082,6 +2155,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- trap-name
- trap-action
@@ -2098,6 +2172,7 @@ operations:
attributes: &trap-group-id-attrs
- bus-name
- dev-name
- index
- trap-group-name
reply: &trap-group-get-reply
value: 67
@@ -2120,6 +2195,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- trap-group-name
- trap-action
- trap-policer-id
@@ -2137,6 +2213,7 @@ operations:
attributes: &trap-policer-id-attrs
- bus-name
- dev-name
- index
- trap-policer-id
reply: &trap-policer-get-reply
value: 71
@@ -2159,6 +2236,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- trap-policer-id
- trap-policer-rate
- trap-policer-burst
@@ -2189,6 +2267,7 @@ operations:
attributes: &rate-id-attrs
- bus-name
- dev-name
- index
- port-index
- rate-node-name
reply: &rate-get-reply
@@ -2212,6 +2291,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- rate-node-name
- rate-tx-share
- rate-tx-max
@@ -2233,6 +2313,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- rate-node-name
- rate-tx-share
- rate-tx-max
@@ -2254,6 +2335,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- rate-node-name
-
@@ -2269,6 +2351,7 @@ operations:
attributes: &linecard-id-attrs
- bus-name
- dev-name
- index
- linecard-index
reply: &linecard-get-reply
value: 80
@@ -2291,6 +2374,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- linecard-index
- linecard-type
@@ -2324,6 +2408,7 @@ operations:
attributes:
- bus-name
- dev-name
- index
- selftests
-
@@ -2335,4 +2420,5 @@ operations:
attributes:
- bus-name
- dev-name
- index
- port-index

35
Documentation/netlink/specs/dpll.yaml
View File

@@ -240,6 +240,20 @@ definitions:
integer part of a measured phase offset value.
Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
fractional part of a measured phase offset value.
-
type: const
name: pin-measured-frequency-divider
value: 1000
doc: |
pin measured frequency divider allows userspace to calculate
a value of measured input frequency as a fractional value with
three digit decimal precision (millihertz).
Value of (DPLL_A_PIN_MEASURED_FREQUENCY /
DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is an integer part of
a measured frequency value.
Value of (DPLL_A_PIN_MEASURED_FREQUENCY %
DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is a fractional part of
a measured frequency value.
-
type: enum
name: feature-state
@@ -319,6 +333,13 @@ attribute-sets:
name: phase-offset-avg-factor
type: u32
doc: Averaging factor applied to calculation of reported phase offset.
-
name: frequency-monitor
type: u32
enum: feature-state
doc: Current or desired state of the frequency monitor feature.
If enabled, dpll device shall measure all currently available
inputs for their actual input frequency.
-
name: pin
enum-name: dpll_a_pin
@@ -456,6 +477,17 @@ attribute-sets:
Value is in PPT (parts per trillion, 10^-12).
Note: This attribute provides higher resolution than the standard
fractional-frequency-offset (which is in PPM).
-
name: measured-frequency
type: u64
doc: |
The measured frequency of the input pin in millihertz (mHz).
Value of (DPLL_A_PIN_MEASURED_FREQUENCY /
DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is an integer part (Hz)
of a measured frequency value.
Value of (DPLL_A_PIN_MEASURED_FREQUENCY %
DPLL_PIN_MEASURED_FREQUENCY_DIVIDER) is a fractional part
of a measured frequency value.
-
name: pin-parent-device
@@ -544,6 +576,7 @@ operations:
- type
- phase-offset-monitor
- phase-offset-avg-factor
- frequency-monitor
dump:
reply: *dev-attrs
@@ -563,6 +596,7 @@ operations:
- mode
- phase-offset-monitor
- phase-offset-avg-factor
- frequency-monitor
-
name: device-create-ntf
doc: Notification about device appearing
@@ -643,6 +677,7 @@ operations:
- esync-frequency-supported
- esync-pulse
- reference-sync
- measured-frequency
dump:
request:

25
Documentation/netlink/specs/ethtool.yaml
View File

@@ -306,10 +306,6 @@ attribute-sets:
name: strings
attr-cnt-name: __ethtool-a-strings-cnt
attributes:
-
name: unspec
type: unused
value: 0
-
name: unspec
type: unused
@@ -861,6 +857,12 @@ attribute-sets:
name: tx-profile
type: nest
nested-attributes: profile
-
name: rx-cqe-frames
type: u32
-
name: rx-cqe-nsecs
type: u32
-
name: pause-stat
@@ -879,6 +881,19 @@ attribute-sets:
-
name: rx-frames
type: u64
-
name: tx-pause-storm-events
type: u64
doc: >-
TX pause storm event count. Increments each time device
detects that its pause assertion condition has been true
for too long for normal operation. As a result, the device
has temporarily disabled its own Pause TX function to
protect the network from itself.
This counter should never increment under normal overload
conditions; it indicates catastrophic failure like an OS
crash. The rate of incrementing is implementation specific.
-
name: pause
attr-cnt-name: __ethtool-a-pause-cnt
@@ -2244,6 +2259,8 @@ operations:
- tx-aggr-time-usecs
- rx-profile
- tx-profile
- rx-cqe-frames
- rx-cqe-nsecs
dump: *coalesce-get-op
-
name: coalesce-set

46
Documentation/netlink/specs/netdev.yaml
View File

@@ -339,6 +339,15 @@ attribute-sets:
doc: XSK information for this queue, if any.
type: nest
nested-attributes: xsk-info
-
name: lease
doc: |
A queue from a virtual device can have a lease which refers to
another queue from a physical device. This is useful for memory
providers and AF_XDP operations which take an ifindex and queue id
to allow applications to bind against virtual devices in containers.
type: nest
nested-attributes: lease
-
name: qstats
doc: |
@@ -537,6 +546,26 @@ attribute-sets:
name: id
-
name: type
-
name: lease
attributes:
-
name: ifindex
doc: The netdev ifindex to lease the queue from.
type: u32
checks:
min: 1
-
name: queue
doc: The netdev queue to lease from.
type: nest
nested-attributes: queue-id
-
name: netns-id
doc: The network namespace id of the netdev.
type: s32
checks:
min: 0
-
name: dmabuf
attributes:
@@ -686,6 +715,7 @@ operations:
- dmabuf
- io-uring
- xsk
- lease
dump:
request:
attributes:
@@ -797,6 +827,22 @@ operations:
reply:
attributes:
- id
-
name: queue-create
doc: |
Create a new queue for the given netdevice. Whether this operation
is supported depends on the device and the driver.
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
kernel-family:
headers: ["net/netdev_netlink.h"]

691
Documentation/netlink/specs/nftables.yaml
View File

File diff suppressed because it is too large Load Diff

23
Documentation/netlink/specs/ovpn.yaml
View File

@@ -43,7 +43,8 @@ attribute-sets:
type: u32
doc: >-
The unique ID of the peer in the device context. To be used to
identify peers during operations for a specific device
identify peers during operations for a specific device.
Also used to match packets received from this peer.
checks:
max: 0xFFFFFF
-
@@ -160,6 +161,16 @@ attribute-sets:
name: link-tx-packets
type: uint
doc: Number of packets transmitted at the transport level
-
name: tx-id
type: u32
doc: >-
The ID value used when transmitting packets to this peer. This
way outgoing packets can have a different ID than incoming ones.
Useful in multipeer-to-multipeer connections, where each peer
will advertise the tx-id to be used on the link.
checks:
max: 0xFFFFFF
-
name: peer-new-input
subset-of: peer
@@ -188,6 +199,8 @@ attribute-sets:
name: keepalive-interval
-
name: keepalive-timeout
-
name: tx-id
-
name: peer-set-input
subset-of: peer
@@ -214,6 +227,8 @@ attribute-sets:
name: keepalive-interval
-
name: keepalive-timeout
-
name: tx-id
-
name: peer-del-input
subset-of: peer
@@ -502,6 +517,12 @@ operations:
- ifindex
- keyconf
-
name: peer-float-ntf
doc: Notification about a peer floating (changing its remote UDP endpoint)
notify: peer-get
mcgrp: peers
mcast-groups:
list:
-

8
Documentation/netlink/specs/psp.yaml
View File

@@ -267,6 +267,14 @@ operations:
- dev-id
- key-rotations
- stale-events
- rx-packets
- rx-bytes
- rx-auth-fail
- rx-error
- rx-bad
- tx-packets
- tx-bytes
- tx-error
pre: psp-device-get-locked
post: psp-device-unlock
dump:

23
Documentation/netlink/specs/rt-link.yaml
View File

@@ -825,6 +825,13 @@ definitions:
entries:
- name: none
- name: default
-
name: netkit-pairing
type: enum
enum-name: netkit-pairing
entries:
- name: pair
- name: single
-
name: ovpn-mode
enum-name: ovpn-mode
@@ -833,6 +840,14 @@ definitions:
entries:
- p2p
- mp
-
name: br-stp-mode
type: enum
enum-name: br-stp-mode
entries:
- auto
- user
- kernel
attribute-sets:
-
@@ -1543,6 +1558,10 @@ attribute-sets:
-
name: fdb-max-learned
type: u32
-
name: stp-mode
type: u32
enum: br-stp-mode
-
name: linkinfo-brport-attrs
name-prefix: ifla-brport-
@@ -2299,6 +2318,10 @@ attribute-sets:
-
name: tailroom
type: u16
-
name: pairing
type: u32
enum: netkit-pairing
-
name: linkinfo-ovpn-attrs
name-prefix: ifla-ovpn-

22
Documentation/networking/bridge.rst
View File

@@ -148,6 +148,28 @@ called by the kernel when STP is enabled/disabled on a bridge
stp_state <0|1>``). The kernel enables user_stp mode if that command returns
0, or enables kernel_stp mode if that command returns any other value.
STP mode selection
------------------
The ``IFLA_BR_STP_MODE`` bridge attribute allows explicit control over how
STP operates when enabled, bypassing the ``/sbin/bridge-stp`` helper
entirely for the ``user`` and ``kernel`` modes.
.. kernel-doc:: include/uapi/linux/if_link.h
:doc: Bridge STP mode values
The default mode is ``BR_STP_MODE_AUTO``, which preserves the traditional
behavior of invoking the ``/sbin/bridge-stp`` helper. The ``user`` and
``kernel`` modes are particularly useful in network namespace environments
where the helper mechanism is not available, as ``call_usermodehelper()``
is restricted to the initial network namespace.
Example::
ip link set dev br0 type bridge stp_mode user stp_state 1
The mode can only be changed while STP is disabled.
VLAN
====

2
Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
View File

@@ -323,7 +323,7 @@ Setup HTB offload
# ethtool -K <interface> hw-tc-offload on
2. Crate htb root::
2. Create htb root::
# tc qdisc add dev <interface> clsact
# tc qdisc replace dev <interface> root handle 1: htb offload

4
Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst
View File

@@ -114,13 +114,13 @@ Enabling the driver and kconfig options
**CONFIG_MLX5_SF=(y/n)**
| Build support for subfunction.
| Subfunctons are more light weight than PCI SRIOV VFs. Choosing this option
| Subfunctions are more light weight than PCI SRIOV VFs. Choosing this option
| will enable support for creating subfunction devices.
**CONFIG_MLX5_SF_MANAGER=(y/n)**
| Build support for subfuction port in the NIC. A Mellanox subfunction
| Build support for subfunction port in the NIC. A Mellanox subfunction
| port is managed through devlink. A subfunction supports RDMA, netdevice
| and vdpa device. It is similar to a SRIOV VF but it doesn't require
| SRIOV support.

70
Documentation/networking/devlink/devlink-resource.rst
View File

@@ -74,3 +74,73 @@ attribute, which represents the pending change in size. For example:
Note that changes in resource size may require a device reload to properly
take effect.
Port-level Resources and Full Dump
==================================
In addition to device-level resources, ``devlink`` also supports port-level
resources. These resources are associated with a specific devlink port rather
than the device as a whole.
To list resources for all devlink devices and ports:
.. code:: shell
$ devlink resource show
pci/0000:03:00.0:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196609:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196708:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196709:
name max_SFs size 128 unit entry dpipe_tables none
To show resources for a specific port:
.. code:: shell
$ devlink resource show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
Resource Scope Filtering
========================
When dumping resources for all devices, ``devlink resource show`` accepts
an optional ``scope`` parameter to restrict the response to device-level
resources, port-level resources, or both (the default).
To dump only device-level resources across all devices:
.. code:: shell
$ devlink resource show scope dev
pci/0000:03:00.0:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
To dump only port-level resources across all devices:
.. code:: shell
$ devlink resource show scope port
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196609:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196708:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196709:
name max_SFs size 128 unit entry dpipe_tables none
Note that port-level resources are read-only.

97
Documentation/networking/devlink/devlink-shared.rst Normal file
View File

@@ -0,0 +1,97 @@
.. SPDX-License-Identifier: GPL-2.0
========================
Devlink Shared Instances
========================
Overview
========
Shared devlink instances allow multiple physical functions (PFs) on the same
chip to share a devlink instance for chip-wide operations.
Multiple PFs may reside on the same physical chip, running a single firmware.
Some of the resources and configurations may be shared among these PFs. The
shared devlink instance provides an object to pin configuration knobs on.
There are two possible usage models:
1. The shared devlink instance is used alongside individual PF devlink
instances, providing chip-wide configuration in addition to per-PF
configuration.
2. The shared devlink instance is the only devlink instance, without
per-PF instances.
It is up to the driver to decide which usage model to use.
The shared devlink instance is not backed by any struct *device*.
Implementation
==============
Architecture
------------
The implementation uses:
* **Chip identification**: PFs are grouped by chip using a driver-specific identifier
* **Shared instance management**: Global list of shared instances with reference counting
API Functions
-------------
The following functions are provided for managing shared devlink instances:
* ``devlink_shd_get()``: Get or create a shared devlink instance identified by a string ID
* ``devlink_shd_put()``: Release a reference on a shared devlink instance
* ``devlink_shd_get_priv()``: Get private data from shared devlink instance
Initialization Flow
-------------------
1. **PF calls shared devlink init** during driver probe
2. **Chip identification** using driver-specific method to determine device identity
3. **Get or create shared instance** using ``devlink_shd_get()``:
* The function looks up existing instance by identifier
* If none exists, creates new instance:
- Allocates and registers devlink instance
- Adds to global shared instances list
- Increments reference count
4. **Set nested devlink instance** for the PF devlink instance using
``devl_nested_devlink_set()`` before registering the PF devlink instance
Cleanup Flow
------------
1. **Cleanup** when PF is removed
2. **Call** ``devlink_shd_put()`` to release reference (decrements reference count)
3. **Shared instance is automatically destroyed** when the last PF removes (reference count reaches zero)
Chip Identification
-------------------
PFs belonging to the same chip are identified using a driver-specific method.
The driver is free to choose any identifier that is suitable for determining
whether two PFs are part of the same device. Examples include:
* **PCI VPD serial numbers**: Extract from PCI VPD
* **Device tree properties**: Read chip identifier from device tree
* **Other hardware-specific identifiers**: Any unique identifier that groups PFs by chip
Locking
-------
A global mutex (``shd_mutex``) protects the shared instances list during registration/deregistration.
Similarly to other nested devlink instance relationships, devlink lock of
the shared instance should be always taken after the devlink lock of PF.
Reference Counting
------------------
Each shared devlink instance maintains a reference count (``refcount_t refcount``).
The reference count is incremented when ``devlink_shd_get()`` is called and decremented
when ``devlink_shd_put()`` is called. When the reference count reaches zero, the shared
instance is automatically destroyed.

1
Documentation/networking/devlink/index.rst
View File

@@ -68,6 +68,7 @@ general.
devlink-resource
devlink-selftests
devlink-trap
devlink-shared
Driver-specific documentation
-----------------------------

5
Documentation/networking/dsa/dsa.rst
View File

@@ -383,11 +383,6 @@ DSA data structures are defined in ``include/net/dsa.h`` as well as
well as various properties of its ports: names/labels, and finally a routing
table indication (when cascading switches)
- ``dsa_platform_data``: platform device configuration data which can reference
a collection of dsa_chip_data structures if multiple switches are cascaded,
the conduit network device this switch tree is attached to needs to be
referenced
- ``dsa_switch_tree``: structure assigned to the conduit network device under
``dsa_ptr``, this structure references a dsa_platform_data structure as well as
the tagging protocol supported by the switch tree, and which receive/transmit

23
Documentation/networking/ethtool-netlink.rst
View File

@@ -96,7 +96,7 @@ For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32``
type is used. For arbitrary length bitmaps, ethtool netlink uses a nested
attribute with contents of one of two forms: compact (two binary bitmaps
representing bit values and mask of affected bits) and bit-by-bit (list of
bits identified by either index or name).
bits identified by index or name).
Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together
with their values which saves a round trip (when the bitset is passed in a
@@ -156,12 +156,16 @@ Bit-by-bit form: nested (bitset) attribute contents:
| | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set |
+-+-+--------------------------------+--------+-----------------------------+
Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can
For bit-by-bit form, ``ETHTOOL_A_BITSET_SIZE`` is optional, and
``ETHTOOL_A_BITSET_BITS`` is mandatory. ``ETHTOOL_A_BITSET_BITS`` nest can
only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an
arbitrary number of them. A bit may be identified by its index or by its
name. When used in requests, listed bits are set to 0 or 1 according to
``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if
index exceeds kernel bit length or if name is not recognized.
``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved.
A request fails if index exceeds kernel bit length or if name is not
recognized. If both name and index are set, the request will fail if they
point to different bits.
When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as
a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in
@@ -1072,6 +1076,8 @@ Kernel response contents:
``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx
``ETHTOOL_A_COALESCE_RX_PROFILE`` nested profile of DIM, Rx
``ETHTOOL_A_COALESCE_TX_PROFILE`` nested profile of DIM, Tx
``ETHTOOL_A_COALESCE_RX_CQE_FRAMES`` u32 max packets, Rx CQE
``ETHTOOL_A_COALESCE_RX_CQE_NSECS`` u32 delay (ns), Rx CQE
=========================================== ====== =======================
Attributes are only included in reply if their value is not zero or the
@@ -1105,6 +1111,13 @@ well with frequent small-sized URBs transmissions.
to DIM parameters, see `Generic Network Dynamic Interrupt Moderation (Net DIM)
<https://www.kernel.org/doc/Documentation/networking/net_dim.rst>`_.
Rx CQE coalescing allows multiple received packets to be coalesced into a
single Completion Queue Entry (CQE) or descriptor writeback.
``ETHTOOL_A_COALESCE_RX_CQE_FRAMES`` describes the maximum number of
frames that can be coalesced into a CQE or writeback.
``ETHTOOL_A_COALESCE_RX_CQE_NSECS`` describes max time in nanoseconds after
the first packet arrival in a coalesced CQE or writeback to be sent.
COALESCE_SET
============
@@ -1143,6 +1156,8 @@ Request contents:
``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx
``ETHTOOL_A_COALESCE_RX_PROFILE`` nested profile of DIM, Rx
``ETHTOOL_A_COALESCE_TX_PROFILE`` nested profile of DIM, Tx
``ETHTOOL_A_COALESCE_RX_CQE_FRAMES`` u32 max packets, Rx CQE
``ETHTOOL_A_COALESCE_RX_CQE_NSECS`` u32 delay (ns), Rx CQE
=========================================== ====== =======================
Request is rejected if it attributes declared as unsupported by driver (i.e.

40
Documentation/networking/ip-sysctl.rst
View File

@@ -202,6 +202,24 @@ neigh/default/gc_thresh3 - INTEGER
Default: 1024
neigh/default/gc_interval - INTEGER
Specifies how often the garbage collector for neighbor entries
should run. This value applies to the entire table, not
individual entries. Unused since kernel v2.6.8.
Default: 30 seconds
neigh/default/gc_stale_time - INTEGER
Determines how long a neighbor entry can remain unused before it is
considered stale and eligible for garbage collection. Entries that have
not been used for longer than this time will be removed by the garbage
collector, unless they have active references, are marked as PERMANENT,
or carry the NTF_EXT_LEARNED or NTF_EXT_VALIDATED flag. Stale entries
are only removed by the periodic GC when there are at least gc_thresh1
neighbors in the table.
Default: 60 seconds
neigh/default/unres_qlen_bytes - INTEGER
The maximum number of bytes which may be used by packets
queued for each unresolved address by other network layers.
@@ -1612,6 +1630,22 @@ ip_local_reserved_ports - list of comma separated ranges
Default: Empty
ip_local_port_step_width - INTEGER
Defines the numerical maximum increment between successive port
allocations within the ephemeral port range when an unavailable port is
reached. This can be used to mitigate accumulated nodes in port
distribution when reserved ports have been configured. Please note that
port collisions may be more frequent in a system with a very high load.
It is recommended to set this value strictly larger than the largest
contiguous block of ports configure in ip_local_reserved_ports. For
large reserved port ranges, setting this to 3x or 4x the size of the
largest block is advised. Using a value equal or greater than the local
port range size completely solves the uneven port distribution problem,
but it can degrade performance under port exhaustion situations.
Default: 0 (disabled)
ip_unprivileged_port_start - INTEGER
This is a per-namespace sysctl. It defines the first
unprivileged port in the network namespace. Privileged ports
@@ -1747,14 +1781,14 @@ icmp_msgs_per_sec - INTEGER
controlled by this limit. For security reasons, the precise count
of messages per second is randomized.
Default: 1000
Default: 10000
icmp_msgs_burst - INTEGER
icmp_msgs_per_sec controls number of ICMP packets sent per second,
while icmp_msgs_burst controls the burst size of these packets.
while icmp_msgs_burst controls the token bucket size.
For security reasons, the precise burst size is randomized.
Default: 50
Default: 10000
icmp_ratemask - INTEGER
Mask made of ICMP types for which rates are being limited.

37
Documentation/networking/ipvs-sysctl.rst
View File

@@ -29,6 +29,33 @@ backup_only - BOOLEAN
If set, disable the director function while the server is
in backup mode to avoid packet loops for DR/TUN methods.
conn_lfactor - INTEGER
Possible values: -8 (larger table) .. 8 (smaller table)
Default: -4
Controls the sizing of the connection hash table based on the
load factor (number of connections per table buckets):
2^conn_lfactor = nodes / buckets
As result, the table grows if load increases and shrinks when
load decreases in the range of 2^8 - 2^conn_tab_bits (module
parameter).
The value is a shift count where negative values select
buckets = (connection hash nodes << -value) while positive
values select buckets = (connection hash nodes >> value). The
negative values reduce the collisions and reduce the time for
lookups but increase the table size. Positive values will
tolerate load above 100% when using smaller table is
preferred with the cost of more collisions. If using NAT
connections consider decreasing the value with one because
they add two nodes in the hash table.
Example:
-4: grow if load goes above 6% (buckets = nodes * 16)
2: grow if load goes above 400% (buckets = nodes / 4)
conn_reuse_mode - INTEGER
1 - default
@@ -219,6 +246,16 @@ secure_tcp - INTEGER
The value definition is the same as that of drop_entry and
drop_packet.
svc_lfactor - INTEGER
Possible values: -8 (larger table) .. 8 (smaller table)
Default: -3
Controls the sizing of the service hash table based on the
load factor (number of services per table buckets). The table
will grow and shrink in the range of 2^4 - 2^20.
See conn_lfactor for explanation.
sync_threshold - vector of 2 INTEGERs: sync_threshold, sync_period
default 3 50

2
Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst
View File

@@ -52,6 +52,7 @@ u8 sysctl_ip_fwd_update_priority
u8 sysctl_ip_nonlocal_bind
u8 sysctl_ip_autobind_reuse
u8 sysctl_ip_dynaddr
u32 sysctl_ip_local_port_step_width
u8 sysctl_ip_early_demux read_mostly ip(6)_rcv_finish_core
u8 sysctl_raw_l3mdev_accept
u8 sysctl_tcp_early_demux read_mostly ip(6)_rcv_finish_core
@@ -104,6 +105,7 @@ u8 sysctl_tcp_nometrics_save
u8 sysctl_tcp_no_ssthresh_metrics_save TCP_LAST_ACK/tcp_(update/init)_metrics
u8 sysctl_tcp_moderate_rcvbuf read_mostly tcp_rcvbuf_grow()
u32 sysctl_tcp_rcvbuf_low_rtt read_mostly tcp_rcvbuf_grow()
u8 sysctl_tcp_shrink_window read_mostly read_mostly __tcp_select_window()
u8 sysctl_tcp_tso_win_divisor read_mostly tcp_tso_should_defer(tcp_write_xmit)
u8 sysctl_tcp_workaround_signed_windows tcp_select_window
int sysctl_tcp_limit_output_bytes read_mostly tcp_small_queue_check(tcp_write_xmit)

1
Documentation/networking/net_cachelines/tcp_sock.rst
View File

@@ -121,6 +121,7 @@ u64 delivered_mstamp read_write
u32 rate_delivered read_mostly tcp_rate_gen
u32 rate_interval_us read_mostly rate_delivered,rate_app_limited
u32 rcv_wnd read_write read_mostly tcp_select_window,tcp_receive_window,tcp_fast_path_check
u32 rcv_mwnd_seq read_write tcp_select_window
u32 write_seq read_write tcp_rate_check_app_limited,tcp_write_queue_empty,tcp_skb_entail,forced_push,tcp_mark_push
u32 notsent_lowat read_mostly tcp_stream_memory_free
u32 pushed_seq read_write tcp_mark_push,forced_push

6
Documentation/networking/netdevices.rst
View File

@@ -329,6 +329,12 @@ by setting ``request_ops_lock`` to true. Code comments and docs refer
to drivers which have ops called under the instance lock as "ops locked".
See also the documentation of the ``lock`` member of struct net_device.
There is also a case of taking two per-netdev locks in sequence when netdev
queues are leased, that is, the netdev-scope lock is taken for both the
virtual and the physical device. To prevent deadlocks, the virtual device's
lock must always be acquired before the physical device's (see
``netdev_nl_queue_create_doit``).
In the future, there will be an option for individual
drivers to opt out of using ``rtnl_lock`` and instead perform their control
operations directly under the netdev instance lock.

13
Documentation/networking/scaling.rst
View File

@@ -403,16 +403,21 @@ Both of these need to be set before RFS is enabled for a receive queue.
Values for both are rounded up to the nearest power of two. The
suggested flow count depends on the expected number of active connections
at any given time, which may be significantly less than the number of open
connections. We have found that a value of 32768 for rps_sock_flow_entries
works fairly well on a moderately loaded server.
connections. We have found that a value of 65536 for rps_sock_flow_entries
works fairly well on a moderately loaded server. Big servers might
need 1048576 or even higher values.
On a NUMA host it is advisable to spread rps_sock_flow_entries on all nodes.
numactl --interleave=all bash -c "echo 1048576 >/proc/sys/net/core/rps_sock_flow_entries"
For a single queue device, the rps_flow_cnt value for the single queue
would normally be configured to the same value as rps_sock_flow_entries.
For a multi-queue device, the rps_flow_cnt for each queue might be
configured as rps_sock_flow_entries / N, where N is the number of
queues. So for instance, if rps_sock_flow_entries is set to 32768 and there
queues. So for instance, if rps_sock_flow_entries is set to 131072 and there
are 16 configured receive queues, rps_flow_cnt for each queue might be
configured as 2048.
configured as 8192.
Accelerated RFS

43
Documentation/networking/smc-sysctl.rst
View File

@@ -23,17 +23,17 @@ autocorking_size - INTEGER
Default: 64K
smcr_buf_type - INTEGER
Controls which type of sndbufs and RMBs to use in later newly created
SMC-R link group. Only for SMC-R.
Controls which type of sndbufs and RMBs to use in later newly created
SMC-R link group. Only for SMC-R.
Default: 0 (physically contiguous sndbufs and RMBs)
Default: 0 (physically contiguous sndbufs and RMBs)
Possible values:
Possible values:
- 0 - Use physically contiguous buffers
- 1 - Use virtually contiguous buffers
- 2 - Mixed use of the two types. Try physically contiguous buffers first.
If not available, use virtually contiguous buffers then.
- 0 - Use physically contiguous buffers
- 1 - Use virtually contiguous buffers
- 2 - Mixed use of the two types. Try physically contiguous buffers first.
If not available, use virtually contiguous buffers then.
smcr_testlink_time - INTEGER
How frequently SMC-R link sends out TEST_LINK LLC messages to confirm
@@ -111,3 +111,30 @@ smcr_max_recv_wr - INTEGER
like before having this control.
Default: 48
limit_smc_hs - INTEGER
Whether to limit SMC handshake for newly created sockets.
When enabled, SMC listen path applies handshake limitation based on
handshake worker congestion and queued SMC handshake load.
Possible values:
- 0 - Disable handshake limitation
- 1 - Enable handshake limitation
Default: 0 (disable)
hs_ctrl - STRING
Select the SMC handshake control profile by name.
This string refers to the name of a user-implemented
BPF struct_ops instance of type smc_hs_ctrl.
The selected profile controls whether SMC options are advertised
during TCP SYN/SYN-ACK handshake.
Only available when CONFIG_SMC_HS_CTRL_BPF is enabled.
Write an empty string to clear the current profile.
Default: empty string

2
Documentation/networking/tls-handshake.rst
View File

@@ -7,7 +7,7 @@ In-Kernel TLS Handshake
Overview
========
Transport Layer Security (TLS) is a Upper Layer Protocol (ULP) that runs
Transport Layer Security (TLS) is an Upper Layer Protocol (ULP) that runs
over TCP. TLS provides end-to-end data integrity and confidentiality in
addition to peer authentication.

18
Documentation/process/maintainer-netdev.rst
View File

@@ -479,8 +479,14 @@ netdevsim
``netdevsim`` is a test driver which can be used to exercise driver
configuration APIs without requiring capable hardware.
Mock-ups and tests based on ``netdevsim`` are strongly encouraged when
adding new APIs, but ``netdevsim`` in itself is **not** considered
Mock-ups and tests based on ``netdevsim`` are encouraged when
adding new APIs with complex logic in the stack. The tests should
be written so that they can run both against ``netdevsim`` and a real
device (see ``tools/testing/selftests/drivers/net/README.rst``).
``netdevsim``-only tests should focus on testing corner cases
and failure paths in the core which are hard to exercise with a real driver.
``netdevsim`` in itself is **not** considered
a use case/user. You must also implement the new APIs in a real driver.
We give no guarantees that ``netdevsim`` won't change in the future
@@ -545,10 +551,12 @@ helpful tips please see :ref:`development_advancedtopics_reviews`.
It's safe to assume that netdev maintainers know the community and the level
of expertise of the reviewers. The reviewers should not be concerned about
their comments impeding or derailing the patch flow.
their comments impeding or derailing the patch flow. A Reviewed-by tag
is understood to mean "I have reviewed this code to the best of my ability"
rather than "I can attest this code is correct".
Less experienced reviewers are highly encouraged to do more in-depth
review of submissions and not focus exclusively on trivial or subjective
Reviewers are highly encouraged to do more in-depth review of submissions
and not focus exclusively on process issues, trivial or subjective
matters like code formatting, tags etc.
Testimonials / feedback

25
MAINTAINERS
View File

@@ -261,12 +261,6 @@ L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-pcie-idio-24.c
ACENIC DRIVER
M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
S: Maintained
F: drivers/net/ethernet/alteon/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Kaestle <peter@piie.net>
L: platform-driver-x86@vger.kernel.org
@@ -4905,6 +4899,9 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/netkit.c
F: include/net/netkit.h
F: tools/testing/selftests/bpf/prog_tests/tc_netkit.c
F: tools/testing/selftests/drivers/net/hw/nk_qlease.py
F: tools/testing/selftests/net/nk_qlease.py
BPF [NETWORKING] (struct_ops, reuseport)
M: Martin KaFai Lau <martin.lau@linux.dev>
@@ -9570,7 +9567,6 @@ F: include/linux/phy_fixed.h
F: include/linux/phy_link_topology.h
F: include/linux/phylib_stubs.h
F: include/linux/platform_data/mdio-bcm-unimac.h
F: include/linux/platform_data/mdio-gpio.h
F: include/net/phy/
F: include/trace/events/mdio.h
F: include/uapi/linux/mdio.h
@@ -11556,7 +11552,6 @@ F: drivers/bus/hisi_lpc.c
HISILICON NETWORK SUBSYSTEM 3 DRIVER (HNS3)
M: Jian Shen <shenjian15@huawei.com>
M: Salil Mehta <salil.mehta@huawei.com>
M: Jijie Shao <shaojijie@huawei.com>
L: netdev@vger.kernel.org
S: Maintained
@@ -11571,7 +11566,6 @@ F: drivers/net/ethernet/hisilicon/hibmcge/
HISILICON NETWORK SUBSYSTEM DRIVER
M: Jian Shen <shenjian15@huawei.com>
M: Salil Mehta <salil.mehta@huawei.com>
L: netdev@vger.kernel.org
S: Maintained
W: http://www.hisilicon.com
@@ -17427,6 +17421,12 @@ L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/8250/8250_pci1xxxx.c
MICROCHIP PIC64-HPSC/HX DRIVERS
M: Charles Perry <charles.perry@microchip.com>
S: Supported
F: Documentation/devicetree/bindings/net/microchip,pic64hpsc-mdio.yaml
F: drivers/net/mdio/mdio-pic64hpsc.c
MICROCHIP POLARFIRE FPGA DRIVERS
M: Conor Dooley <conor.dooley@microchip.com>
L: linux-fpga@vger.kernel.org
@@ -21135,6 +21135,7 @@ PPP PROTOCOL DRIVERS AND COMPRESSORS
L: linux-ppp@vger.kernel.org
S: Orphan
F: drivers/net/ppp/ppp_*
F: tools/testing/selftests/net/ppp/
PPS SUPPORT
M: Rodolfo Giometti <giometti@enneenne.com>
@@ -24901,6 +24902,12 @@ W: https://linuxtv.org
Q: http://patchwork.linuxtv.org/project/linux-media/list/
F: drivers/media/dvb-frontends/sp2*
SPACEMIT DWMAC GLUE LAYER
M: Inochi Amaoto <inochiama@gmail.com>
S: Maintained
F: Documentation/devicetree/bindings/net/spacemit,k3-dwmac.yaml
F: drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
SPACEMIT K1 I2C DRIVER
M: Troy Mitchell <troy.mitchell@linux.spacemit.com>
S: Maintained

1
arch/arm/configs/omap2plus_defconfig
View File

@@ -704,7 +704,6 @@ CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_GHASH_ARM_CE=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_ARM_BS=m

1
arch/arm/configs/spitz_defconfig
View File

@@ -230,7 +230,6 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_FONTS=y

3
arch/arm64/configs/defconfig
View File

@@ -140,7 +140,7 @@ CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IPV6=m
CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_BRIDGE_NETFILTER=m
CONFIG_NF_CONNTRACK=m
@@ -1914,7 +1914,6 @@ CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_BENCHMARK=m
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_USER_API_RNG=m

1
arch/loongarch/configs/loongson32_defconfig
View File

@@ -571,7 +571,6 @@ CONFIG_VIRTIO_NET=m
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set

1
arch/loongarch/configs/loongson64_defconfig
View File

@@ -587,7 +587,6 @@ CONFIG_VIRTIO_NET=m
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set

45
arch/m68k/configs/amiga_defconfig
View File

@@ -72,15 +72,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -96,7 +88,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -113,7 +104,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -121,8 +111,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -197,6 +185,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -218,29 +207,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -251,7 +219,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -270,13 +237,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -578,7 +538,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/apollo_defconfig
View File

@@ -68,15 +68,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -92,7 +84,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -109,7 +100,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -117,8 +107,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -193,6 +181,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -214,29 +203,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -247,7 +215,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -266,13 +233,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -535,7 +495,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/atari_defconfig
View File

@@ -75,15 +75,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -99,7 +91,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -116,7 +107,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -124,8 +114,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -200,6 +188,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -221,29 +210,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -254,7 +222,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -273,13 +240,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -555,7 +515,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/bvme6000_defconfig
View File

@@ -65,15 +65,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -89,7 +81,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -106,7 +97,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -114,8 +104,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -190,6 +178,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -211,29 +200,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -244,7 +212,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -263,13 +230,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -527,7 +487,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/hp300_defconfig
View File

@@ -67,15 +67,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -91,7 +83,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -108,7 +99,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -116,8 +106,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -192,6 +180,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -213,29 +202,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -246,7 +214,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -265,13 +232,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -537,7 +497,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/mac_defconfig
View File

@@ -66,15 +66,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -90,7 +82,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -107,7 +98,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -115,8 +105,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -191,6 +179,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -212,29 +201,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -245,7 +213,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -264,13 +231,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -554,7 +514,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/multi_defconfig
View File

@@ -86,15 +86,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -110,7 +102,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -127,7 +118,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -135,8 +125,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -211,6 +199,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -232,29 +221,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -265,7 +233,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -284,13 +251,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -641,7 +601,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/mvme147_defconfig
View File

@@ -64,15 +64,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -88,7 +80,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -105,7 +96,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -113,8 +103,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -189,6 +177,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -210,29 +199,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -243,7 +211,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -262,13 +229,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -527,7 +487,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/mvme16x_defconfig
View File

@@ -65,15 +65,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -89,7 +81,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -106,7 +97,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -114,8 +104,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -190,6 +178,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -211,29 +200,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -244,7 +212,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -263,13 +230,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -528,7 +488,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/q40_defconfig
View File

@@ -66,15 +66,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -90,7 +82,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -107,7 +98,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -115,8 +105,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -191,6 +179,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -212,29 +201,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -245,7 +213,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -264,13 +231,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -544,7 +504,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/sun3_defconfig
View File

@@ -61,15 +61,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -85,7 +77,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -102,7 +93,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -110,8 +100,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -186,6 +174,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -207,29 +196,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -240,7 +208,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -259,13 +226,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -525,7 +485,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

45
arch/m68k/configs/sun3x_defconfig
View File

@@ -62,15 +62,7 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NF_CONNTRACK=m
@@ -86,7 +78,6 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
@@ -103,7 +94,6 @@ CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
@@ -111,8 +101,6 @@ CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES_LEGACY=y
@@ -187,6 +175,7 @@ CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
@@ -208,29 +197,8 @@ CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -241,7 +209,6 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -260,13 +227,6 @@ CONFIG_RDS_TCP=m
CONFIG_L2TP=m
CONFIG_BRIDGE=m
CONFIG_ATALK=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
@@ -525,7 +485,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SM3=m

1
arch/mips/configs/bigsur_defconfig
View File

@@ -222,7 +222,6 @@ CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m

1
arch/mips/configs/cavium_octeon_defconfig
View File

@@ -60,7 +60,6 @@ CONFIG_PATA_OCTEON_CF=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set

1
arch/mips/configs/decstation_64_defconfig
View File

@@ -180,7 +180,6 @@ CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m

1
arch/mips/configs/decstation_defconfig
View File

@@ -175,7 +175,6 @@ CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m

1
arch/mips/configs/decstation_r4k_defconfig
View File

@@ -175,7 +175,6 @@ CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m

1
arch/mips/configs/gpr_defconfig
View File

@@ -275,7 +275,6 @@ CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_BENCHMARK=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m

1
arch/mips/configs/ip32_defconfig
View File

@@ -159,7 +159,6 @@ CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y

1
arch/mips/configs/lemote2f_defconfig
View File

@@ -308,7 +308,6 @@ CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_WP512=m

1
arch/mips/configs/loongson2k_defconfig
View File

@@ -137,7 +137,6 @@ CONFIG_NETDEVICES=y
CONFIG_TUN=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set

1
arch/mips/configs/loongson3_defconfig
View File

@@ -184,7 +184,6 @@ CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set

2
arch/mips/configs/malta_qemu_32r6_defconfig
View File

@@ -85,7 +85,6 @@ CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -167,7 +166,6 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m

2
arch/mips/configs/maltaaprp_defconfig
View File

@@ -87,7 +87,6 @@ CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -168,7 +167,6 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m

2
arch/mips/configs/maltasmvp_defconfig
View File

@@ -86,7 +86,6 @@ CONFIG_ATA_PIIX=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -169,7 +168,6 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m

2
arch/mips/configs/maltasmvp_eva_defconfig
View File

@@ -89,7 +89,6 @@ CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -171,7 +170,6 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m

2
arch/mips/configs/maltaup_defconfig
View File

@@ -86,7 +86,6 @@ CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -167,7 +166,6 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m

2
arch/mips/configs/mtx1_defconfig
View File

@@ -257,7 +257,6 @@ CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ACENIC=m
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
@@ -663,7 +662,6 @@ CONFIG_CRYPTO_BENCHMARK=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m

1
arch/mips/configs/rm200_defconfig
View File

@@ -382,7 +382,6 @@ CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m

1
arch/mips/configs/sb1250_swarm_defconfig
View File

@@ -85,7 +85,6 @@ CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_BLOWFISH=m

2
arch/parisc/configs/generic-32bit_defconfig
View File

@@ -78,7 +78,6 @@ CONFIG_DUMMY=m
CONFIG_TUN=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -259,7 +258,6 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DEFLATE=y

2
arch/parisc/configs/generic-64bit_defconfig
View File

@@ -97,7 +97,6 @@ CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_TUN=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -287,7 +286,6 @@ CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
CONFIG_PRINTK_TIME=y

1
arch/powerpc/configs/44x/akebono_defconfig
View File

@@ -47,7 +47,6 @@ CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_ATA_SFF is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set

3
arch/powerpc/configs/g5_defconfig
View File

@@ -92,8 +92,6 @@ CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_TIGON3=y
CONFIG_E1000=y
CONFIG_SUNGEM=y
@@ -238,7 +236,6 @@ CONFIG_BOOTX_TEXT=y
CONFIG_CRYPTO_BENCHMARK=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m

1
arch/powerpc/configs/linkstation_defconfig
View File

@@ -129,7 +129,6 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_SERPENT=m

1
arch/powerpc/configs/mvme5100_defconfig
View File

@@ -115,7 +115,6 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_DES=y

3
arch/powerpc/configs/powernv_defconfig
View File

@@ -158,8 +158,6 @@ CONFIG_NETCONSOLE=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VORTEX=m
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_PCNET32=m
CONFIG_TIGON3=y
CONFIG_BNX2X=m
@@ -319,7 +317,6 @@ CONFIG_XMON=y
CONFIG_CRYPTO_BENCHMARK=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m

3
arch/powerpc/configs/ppc64_defconfig
View File

@@ -204,8 +204,6 @@ CONFIG_NETCONSOLE=y
CONFIG_TUN=m
CONFIG_VIRTIO_NET=m
CONFIG_VORTEX=m
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_PCNET32=m
CONFIG_TIGON3=y
CONFIG_BNX2X=m
@@ -382,7 +380,6 @@ CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_LZO=m

3
arch/powerpc/configs/ppc64e_defconfig
View File

@@ -96,8 +96,6 @@ CONFIG_DUMMY=m
CONFIG_NETCONSOLE=y
CONFIG_TUN=m
CONFIG_VORTEX=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_PCNET32=y
CONFIG_TIGON3=y
CONFIG_E100=y
@@ -225,7 +223,6 @@ CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m

2
arch/powerpc/configs/ppc6xx_defconfig
View File

@@ -410,7 +410,6 @@ CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ACENIC=m
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
@@ -1077,7 +1076,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA512=m

1
arch/powerpc/configs/ps3_defconfig
View File

@@ -146,7 +146,6 @@ CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_LZO=m
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y

2
arch/powerpc/configs/skiroot_defconfig
View File

@@ -125,8 +125,6 @@ CONFIG_DM_MULTIPATH=m
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set

2
arch/s390/configs/debug_defconfig
View File

@@ -524,7 +524,6 @@ CONFIG_NLMON=m
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
@@ -794,7 +793,6 @@ CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m

Some files were not shown because too many files have changed in this diff Show More