Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: update MAINTAINERS file due to driver movement
  tty: move drivers/serial/ to drivers/tty/serial/
  tty: move hvc drivers to drivers/tty/hvc/

drivers/Makefile

@@ -24,7 +24,7 @@ obj-$(CONFIG_XEN)		+= xen/
 # regulators early, since some subsystems rely on them to initialize
 obj-$(CONFIG_REGULATOR)		+= regulator/
 
-# char/ comes before serial/ etc so that the VT console is the boot-time
+# tty/ comes before char/ so that the VT console is the boot-time
 # default.
 obj-y				+= tty/
 obj-y				+= char/
@@ -38,7 +38,6 @@ obj-$(CONFIG_CONNECTOR)		+= connector/
 obj-$(CONFIG_FB_I810)           += video/i810/
 obj-$(CONFIG_FB_INTEL)          += video/intelfb/
 
-obj-y				+= serial/
 obj-$(CONFIG_PARPORT)		+= parport/
 obj-y				+= base/ block/ misc/ mfd/ nfc/
 obj-$(CONFIG_NUBUS)		+= nubus/

drivers/char/Kconfig

@@ -426,7 +426,7 @@ config SGI_MBCS
          If you have an SGI Altix with an attached SABrick
          say Y or M here, otherwise say N.
 
-source "drivers/serial/Kconfig"
+source "drivers/tty/serial/Kconfig"
 
 config UNIX98_PTYS
 	bool "Unix98 PTY support" if EMBEDDED

drivers/char/Makefile

@@ -30,25 +30,12 @@ obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
-obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
-obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
-obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
-obj-$(CONFIG_HVC_TILE)		+= hvc_tile.o
-obj-$(CONFIG_HVC_DCC)		+= hvc_dcc.o
-obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
-obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
-obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
-obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
-obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
-obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
-obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
 obj-$(CONFIG_MMTIMER)		+= mmtimer.o
 obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_VIOTAPE)		+= viotape.o
-obj-$(CONFIG_HVCS)		+= hvcs.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
 obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
 obj-$(CONFIG_BRIQ_PANEL)	+= briq_panel.o

drivers/tty/Makefile

@@ -9,3 +9,5 @@ obj-$(CONFIG_N_GSM)		+= n_gsm.o
 obj-$(CONFIG_R3964)		+= n_r3964.o
 
 obj-y				+= vt/
+obj-$(CONFIG_HVC_DRIVER)	+= hvc/
+obj-y				+= serial/

drivers/tty/hvc/Makefile

@@ -0,0 +1,13 @@
+obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
+obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
+obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
+obj-$(CONFIG_HVC_TILE)		+= hvc_tile.o
+obj-$(CONFIG_HVC_DCC)		+= hvc_dcc.o
+obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
+obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
+obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
+obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
+obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
+obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
+obj-$(CONFIG_HVCS)		+= hvcs.o
+obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o