[why]
dc_link contains over 30k line of code, the decision is to break it
down to files residing in link folder based on functionality. This
change is the last break down change which will remove dc_link.c
file after everything is broken down.
[how]
Move remaining dc_link.c functions into link_detection, link_dpms,
link_validation, link_resource, and link_fpga and remove dc_link.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current RC params are based on VESA recommended configurations.
Some DSC sink may prefer non standard rc params values due to
hardware limitations. To support those DSC sink we will allow DM to
optionally pass rc_params_ovrd in dc_dsc_config so DC will override
the default VESA recommended configurations.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. Move dd_link_ddc functions to link_ddc.
2. Move link ddc functions declaration exposed in dc to link.h
3. Move link ddc functions declaration exposed in dm to dc_link.h
4. Remove i2caux_interface.h file
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We skip dsc_validation on pipes that are underlays, but in the
acquire_dsc code we don't have this check.
In certain conditions (when underlay pipe index is lower) we will assign
the dsc resource to the underlay pipe and skip the base pipe.
Now during dsc_validation we will skip the underlay pipe (this has the
dsc resource) but try to validate the base pipe(this doesn't have a dsc
resource) due to this mismatch we hit a NULLPTR
[How]
In the acquire_dsc add a check for underlay pipe so we
don't acquire a dsc resource for this pipe. This will match the
acquire/validation conditions.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Pixel rate div depends on the type of encoder
that we are enabling stream with. If we swap between
HPO and DIO encoder at the time we call enable stream
for the new encoder, we must reprogram pixel rate div
based on the new encoder type.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Proper phantom pipe disable sequence was missing in
commit_planes_for_stream
- If disabling phantom pipe, turn on phantom OTG first, and turn
off the phantom OTG after the plane is disabled
- Also update sequence for enabling / disabling phantom streams
(apply_ctx_to_hw). When enabling phantom pipes, enable before
doing front end programming for phantom pipes. If disabling
phantom pipes, disable after front end programming (i.e. after
phantom plane disable)
- TODO: Still need to properly handle transition case when a phantom
pipe is transitioned directly into a real pipe (need to fully disable
the phantom pipe first)
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Output transfer function must be programmed per pipe as part of a front end
update when the plane changes, or output transfer function changes for a
given plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Corruption can occur in LB if vready_offset is not large enough.
DML calculates vready_offset for each pipe, but we currently select the
top pipe's vready_offset, which is not necessarily enough for all pipes
in the group.
[HOW]
Wherever program_global_sync is currently called, iterate through the
entire pipe group and find the highest vready_offset.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow is observed when cursor is still enabled when the cursor
rectangle is outside the bounds of it's surface viewport.
[How]
Update parameters used to determine when cursor should be disabled.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A hack was used to access DWB register due to difference in the register
naming convention which was not compatible with existing SR/SRI* macros.
The additional macro needed were added to dwb ip specific header file
(dcnxx_dwb.h) instead of soc resource file (dcnxx_resource.c). Due to
this pattern, BASE macro had to be redefined in dcnxx_dwb.h, which in
turn needed us to undefine them in the resource file.
[How]
Add a separate macro for DWB access to the resource files that need it
instead of defining them in DWB ip header file. This will enable us to
reuse the BASE macro defined in the resource file.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When transitioning a pipe in use (non-phantom) to become
a phantom pipe, we must fully disable the pipe first before
doing any phantom pipe programming
- Move phantom OTG enablement to after "regular" front-end
programming sequence (including wait for vupdate)
- If a pipe is being transitioned into a phantom pipe,
fully disable it first
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Software state expects pipes to be configured for ODM, but due to the transition
occurring on a plane disable, the ODM enablement code is not run.
[HOW?]
Update ODM when removing a plane, and dynamic ODM is active. Also acquire pipe
lock when removing a plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why and how]
This line was originally removed for a compliance issue, but then
reverted as it caused a fringe underflow case.
However, the addition of this line caused a underflow regression
when subVP is on, and it needs to be removed again. We plan to
fix subvp underflow and then re-add in this line. After that,
we will investigate what to do next for the compliance issue.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Skipping vblank during global sync update request can result in
underflow on certain displays.
[HOW]
Roll back to the previous behavior where DC waits for vblank during pipe
programming.
Fixes: 5d3e144214 ("drm/amd/display: do not wait for vblank during pipe programming")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Haiyi Zhou <Haiyi.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. As recommended by hardware team, don't enable APG when stream is not
enabled.
2. Move audio stream encoder programming into link_hwss.
[how]
1. Merge dp_audio_enable into enable audio stream hw sequence.
2. Move stream encoder programming into link hwss level to unify stream
encoder programming interface.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using a device based on DCN32/321,
we have an issue where a second
4k@60Hz display does not light up,
and the system becomes unresponsive
for a few minutes. In the debug process,
it was possible to see a hang
in the function dcn20_post_unlock_program_front_end
in this part:
for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000
&& hubp->funcs->hubp_is_flip_pending(hubp); j++)
mdelay(1);
}
The hubp_is_flip_pending always returns positive
for waiting pending flips which is a symptom of
pipe hang. Additionally, the dmesg log shows
this message after a few minutes:
BUG: soft lockup - CPU#4 stuck for 26s!
...
[ +0.000003] dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu]
[ +0.000171] dc_commit_state_no_check+0x63d/0xbf0 [amdgpu]
[ +0.000155] ? dc_validate_global_state+0x358/0x3d0 [amdgpu]
[ +0.000154] dc_commit_state+0xe2/0xf0 [amdgpu]
This confirmed the hypothesis that we had a pipe
hanging somewhere. Next, after checking the
ftrace entries, we have the below weird
sequence:
[..]
2) | dcn10_lock_all_pipes [amdgpu]() {
2) 0.120 us | optc1_is_tg_enabled [amdgpu]();
2) | dcn20_pipe_control_lock [amdgpu]() {
2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() {
2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.551 us | }
2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.511 us | }
2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
[..]
We are not expected to read from dmub register
so many times and for so long. From the trace log,
it was possible to identify that the function
dcn20_pipe_control_lock was triggering the dmub
operation when it was unnecessary and causing
the hang issue. This commit drops the unnecessary
dmub code and, consequently, fixes the second display not
lighting up the issue.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The struct timing_generator_funcs provides a hook for setting up the
maximum possible vertical dimension of display for OTG, as the panel
supports. DCN10 has a standard function named optc1_set_vtotal_min_max
which all ASICs can use to set the aforementioned hook. Since we did not
set it for DCN20, this commit initializes the set_vtotal_min_max with
the DCN10 function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since different features would need to update cursor registers, However,
they would use different approaches.
To unify varied methods, this refactor is implemented the same update
cursor info method for current varied features.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Max Tseng <Max.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.
[HOW?]
Increase compbuf size prior to updating clocks.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The desktop plane and full-screen game plane may have different
gamut remap coefficients, if switching between desktop and
full-screen game without updating the gamut remap will cause
incorrect color.
[How]
Update gamut remap if planes change.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Original change 594b237b9a ("drm/amd/display: Add
interface to track PHY state") was implemented by assuming stream's
dpms off is equivalent to PHY power off.
This assumption doesn't hold in following situations:
1. MST multiple stream scenario, where multiple streams are sharing the
same PHY output. Toggle dpms off for one of the stream doesn't power
off the PHY due to the presence of other streams.
2. enable stream failure scenario, where enable stream fails due to
failure of link training. This will cause DPMS off is set to false, while
the actual PHY power state is off in certain cases.
Due to the problematic assumption, the logic will skip disabling
other streams for MST multiple stream scenario, therefore PHY is
not actually powered off.
[how]
1. Rework this refactor by moving PHY state update down to hardware
level, where we update PHY state in place when hardware sequencer
is actually changing the power state of the PHY hardware.
2. Reimplement symclk on TX off workaround in place when we are actually
calling transmitter control to power off PHY in dcn32. Note the workaround is
added due to the lack of proper software interface to set TX while keeping
symclk on. We plan to address this interface problem so we can set TX off
only without affecting symclk in future dcn versions.
Fixes: 594b237b9a ("drm/amd/display: Add interface to track PHY state")
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In some cases the viewport position of the main pipes can change without
triggering a full update. In this case the subvp phantom viewports must
be updated accordingly.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
We would like to have visual confirm color support for SubVP.
1. Set visual confirm color to red: SubVP is enable on this
display;
2. Set visual confirm color to green: SubVP is enable on
other display and DRR is on this display;
3. Set visual confirm color to blue: SubVP is enable on
other display and DRR is off on this display;
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green
point failures in HDR10 DTN tests. The re-implementation of ARGB16161616
was to fix this however it did not actually fix this issue but a side effect of the
issue.
[HOW]
Change ARGB16161616 pixel format to 26.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[How]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
