Workaround Wa_18018781329 has applied to several recent Xe_HP-based
platforms. However there are some extra gotchas to implementing this
properly for MTL that we need to take into account:
* Due to the separation of media and render/compute into separate GTs,
this workaround needs to be implemented on each GT, not just the
primary GT. Since each class of register only exists on one of the
two GTs, we should program the appropriate registers on each GT.
* As with past Xe_HP platforms, the registers on the primary GT (Xe_LPG
IP) are multicast/replicated registers and should be handled with the
MCR-aware functions. However the registers on the media GT (Xe_LPM+
IP) are regular singleton registers and should _not_ use MCR
handling. We need to create separate register definitions for the
Xe_HP multicast form and the Xe_LPM+ singleton form and use each in
the appropriate place.
* Starting with MTL, workarounds documented by the hardware teams are
technically associated with IP versions/steppings rather than
top-level platforms. That means we should take care to check the
media IP version rather than the graphics IP version when deciding
whether the workaround is needed on the Xe_LPM+ media GT (in this
case the workaround applies to both IPs and the stepping bounds are
identical, but we should still write the code appropriately to set a
proper precedent for future workaround implementations).
* It's worth noting that the GSC register and the CCS register are
defined with the same MMIO offset (0xCF30). Since the CCS is only
relevant to the primary GT and the GSC is only relevant to the media
GT there isn't actually a clash here (the media GT automatically adds
the additional 0x380000 GSI offset). However there's currently a
glitch in the bspec where the CCS register doesn't show up at all and
the GSC register is listed as existing on both GTs. That's a known
documentation problem for several registers with shared GSC/CCS
offsets; rest assured that the CCS register really does still exist.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Fixes: 41bb543f55 ("drm/i915/mtl: Add initial gt workarounds")
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-2-matthew.d.roper@intel.com
Move a handful of key enums to a new file intel_display_limits.h. These
are the enum types, and the MAX/NUM enumerations within them, that are
used in other headers. Otherwise, there's no common theme between them.
Replace intel_display.h include with intel_display_limit.h where
relevant, and add the intel_display.h include directly in the .c files
where needed.
Since intel_display.h is used almost everywhere in display/, include it
from intel_display_types.h to avoid massive changes across the
board. There are very few files that would need intel_display_types.h
but not intel_display.h so this is neglible, and further cleanup between
these headers can be left for the future.
Overall this change drops the direct and indirect dependencies on
intel_display.h from about 300 to about 100 compilation units, because
we can drop the include from i915_drv.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116164644.1752009-1-jani.nikula@intel.com
Driver Changes:
Fixes/improvements/new stuff:
- Fix workarounds on Gen2-3 (Tvrtko Ursulin)
- Fix HuC delayed load memory leaks (Daniele Ceraolo Spurio)
- Fix a BUG caused by impendance mismatch in dma_fence_wait_timeout and GuC (Janusz Krzysztofik)
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663 (Matt Atwood)
- Apply recommended L3 hashing mask tuning parameters (Gen12+) (Matt Roper)
- Improve suspend / resume times with VT-d scanout workaround active (Andi Shyti, Chris Wilson)
- Silence misleading "mailbox access failed" warning in snb_pcode_read (Ashutosh Dixit)
- Fix null pointer dereference on HSW perf/OA (Umesh Nerlige Ramappa)
- Avoid trampling the ring during buffer migration (and selftests) (Chris Wilson, Matthew Auld)
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state (Matthew Auld)
- More fixing of DG2 visual corruption by not forgetting to copy CCS aux state of backup objects (Matthew Auld)
- Fix TLB invalidation for Gen12.50 video and compute engines (Andrzej Hajda)
- Limit Wa_22012654132 to just specific steppings (Matt Roper)
- Fix userspace crashes due eviction not working under lock contention after the object locking conversion (Matthew Auld)
- Avoid double free is user deploys a corrupt GuC firmware (John Harrison)
- Fix 32-bit builds by using "%zu" to format size_t (Nirmoy Das)
- Fix a possible BUG in TTM async unbind due not reserving enough fence slots (Nirmoy Das)
- Fix potential use after free by not exposing the GEM context id to userspace too early (Rob Clark)
- Show clamped PL1 limit to the user (hwmon) (Ashutosh Dixit)
- Workaround unreliable reset on Jasperlake (Chris Wilson)
- Cover rest of SVG unit MCR registers (Gustavo Sousa)
- Avoid PXP log spam on platforms which do not support the feature (Alan Previn)
- Re-disable RC6p on Sandy Bridge to avoid GPU hangs and visual glitches (Sasa Dragic)
Future platform enablement:
- Manage uncore->lock while waiting on MCR register (Matt Roper)
- Enable Idle Messaging for GSC CS (Vinay Belgaumkar)
- Only initialize GSC in tile 0 (José Roberto de Souza)
- Media GT and Render GT share common GGTT (Aravind Iddamsetty)
- Add dedicated MCR lock (Matt Roper)
- Implement recommended caching policy (PVC) (Wayne Boyer)
- Add hardware-level lock for steering (Matt Roper)
- Check full IP version when applying hw steering semaphore (Matt Roper)
- Enable GuC GGTT invalidation from the start (Daniele Ceraolo Spurio)
- MTL GSC firmware support (Daniele Ceraolo Spurio, Jonathan Cavitt)
- MTL OA support (Umesh Nerlige Ramappa)
- MTL initial gt workarounds (Matt Roper)
Driver refactors:
- Hold forcewake and MCR lock over PPAT setup (Matt Roper)
- Acquire fw before loop in intel_uncore_read64_2x32 (Umesh Nerlige Ramappa)
- GuC filename cleanups and use submission API version number (John Harrison)
- Promote pxp subsystem to top-level of i915 (Alan Previn)
- Finish proofing the code agains object size overflows (Chris Wilson, Gwan-gyeong Mun)
- Start adding module oriented dmesg output (John Harrison)
Miscellaneous:
- Correct kerneldoc for intel_gt_mcr_wait_for_reg() (Matt Roper)
- Bump up sample period for busy stats selftest (Umesh Nerlige Ramappa)
- Make GuC default_lists const data (Jani Nikula)
- Fix table order verification to check all FW types (John Harrison)
- Remove some limited use register access wrappers (Jani Nikula)
- Remove struct_member macro (Andrzej Hajda)
- Remove hardcoded value with a macro (Nirmoy Das)
- Use helper func to find out map type (Nirmoy Das)
- Fix a static analysis warning (John Harrison)
- Consolidate VMA active tracking helpers (Andrzej Hajda)
- Do not cover all future platforms in TLB invalidation (Tvrtko Ursulin)
- Replace zero-length arrays with flexible-array members (Gustavo A. R. Silva)
- Unwind hugepages to drop wakeref on error (Chris Wilson)
- Remove a couple of superfluous i915_drm.h includes (Jani Nikula)
Merges:
- Merge drm/drm-next into drm-intel-gt-next (Rodrigo Vivi)
danvet: Fix up merge conflict in intel_uc_fw.c, we ended up with 2
copies of try_firmware_load() somehow.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8fW2Ny1B1hZ5ZmF@tursulin-desk
Starting with MTL, there will be two GT-tiles, a render and media
tile. PXP as a service for supporting workloads with protected
contexts and protected buffers can be subscribed by process
workloads on any tile. However, depending on the platform,
only one of the tiles is used for control events pertaining to PXP
operation (such as creating the arbitration session and session
tear-down).
PXP as a global feature is accessible via batch buffer instructions
on any engine/tile and the coherency across tiles is handled implicitly
by the HW. In fact, for the foreseeable future, we are expecting this
single-control-tile for the PXP subsystem.
In MTL, it's the standalone media tile (not the root tile) because
it contains the VDBOX and KCR engine (among the assets PXP relies on
for those events).
Looking at the current code design, each tile is represented by the
intel_gt structure while the intel_pxp structure currently hangs off the
intel_gt structure.
Keeping the intel_pxp structure within the intel_gt structure makes some
internal functionalities more straight forward but adds code complexity to
code readability and maintainibility to many external-to-pxp subsystems
which may need to pick the correct intel_gt structure. An example of this
would be the intel_pxp_is_active or intel_pxp_is_enabled functionality
which should be viewed as a global level inquiry, not a per-gt inquiry.
That said, this series promotes the intel_pxp structure into the
drm_i915_private structure making it a top-level subsystem and the PXP
subsystem will select the control gt internally and keep a pointer to
it for internal reference.
This promotion comes with two noteworthy changes:
1. Exported pxp functions that are called by external subsystems
(such as intel_pxp_enabled/active) will have to check implicitly
if i915->pxp is valid as that structure will not be allocated
for HW that doesn't support PXP.
2. Since GT is now considered a soft-dependency of PXP we are
ensuring that GT init happens before PXP init and vice versa
for fini. This causes a minor ordering change whereby we previously
called intel_pxp_suspend after intel_uc_suspend but now is before
i915_gem_suspend_late but the change is required for correct
dependency flows. Additionally, this re-order change doesn't
have any impact because at that point in either case, the top level
entry to i915 won't observe any PXP events (since the GPU was
quiesced during suspend_prepare). Also, any PXP event doesn't
really matter when we disable the PXP HW (global GT irqs are
already off anyway, so even if there was a bug that generated
spurious events we wouldn't see it and we would just clean it
up on resume which is okay since the default fallback action
for PXP would be to keep the sessions off at this suspend stage).
Changes from prior revs:
v11: - Reformat a comment (Tvrtko).
v10: - Change the code flow for intel_pxp_init to make it more
cleaner and readible with better comments explaining the
difference between full-PXP-feature vs the partial-teelink
inits depending on the platform. Additionally, only do
the pxp allocation when we are certain the subsystem is
needed. (Tvrtko).
v9: - Cosmetic cleanups in supported/enabled/active. (Daniele).
- Add comments for intel_pxp_init and pxp_get_ctrl_gt that
explain the functional flow for when PXP is not supported
but the backend-assets are needed for HuC authentication
(Daniele and Tvrtko).
- Fix two remaining functions that are accessible outside
PXP that need to be checking pxp ptrs before using them:
intel_pxp_irq_handler and intel_pxp_huc_load_and_auth
(Tvrtko and Daniele).
- User helper macro in pxp-debugfs (Tvrtko).
v8: - Remove pxp_to_gt macro (Daniele).
- Fix a bug in pxp_get_ctrl_gt for the case of MTL and we don't
support GSC-FW on it. (Daniele).
- Leave i915->pxp as NULL if we dont support PXP and in line
with that, do additional validity check on i915->pxp for
intel_pxp_is_supported/enabled/active (Daniele).
- Remove unncessary include header from intel_gt_debugfs.c
and check drm_minor i915->drm.primary (Daniele).
- Other cosmetics / minor issues / more comments on suspend
flow order change (Daniele).
v7: - Drop i915_dev_to_pxp and in intel_pxp_init use 'i915->pxp'
through out instead of local variable newpxp. (Rodrigo)
- In the case intel_pxp_fini is called during driver unload but
after i915 loading failed without pxp being allocated, check
i915->pxp before referencing it. (Alan)
v6: - Remove HAS_PXP macro and replace it with intel_pxp_is_supported
because : [1] introduction of 'ctrl_gt' means we correct this
for MTL's upcoming series now. [2] Also, this has little impact
globally as its only used by PXP-internal callers at the moment.
- Change intel_pxp_init/fini to take in i915 as its input to avoid
ptr-to-ptr in init/fini calls.(Jani).
- Remove the backpointer from pxp->i915 since we can use
pxp->ctrl_gt->i915 if we need it. (Rodrigo).
v5: - Switch from series to single patch (Rodrigo).
- change function name from pxp_get_kcr_owner_gt to
pxp_get_ctrl_gt.
- Fix CI BAT failure by removing redundant call to intel_pxp_fini
from driver-remove.
- NOTE: remaining open still persists on using ptr-to-ptr
and back-ptr.
v4: - Instead of maintaining intel_pxp as an intel_gt structure member
and creating a number of convoluted helpers that takes in i915 as
input and redirects to the correct intel_gt or takes any intel_gt
and internally replaces with the correct intel_gt, promote it to
be a top-level i915 structure.
v3: - Rename gt level helper functions to "intel_pxp_is_enabled/
supported/ active_on_gt" (Daniele)
- Upgrade _gt_supports_pxp to replace what was intel_gtpxp_is
supported as the new intel_pxp_is_supported_on_gt to check for
PXP feature support vs the tee support for huc authentication.
Fix pxp-debugfs-registration to use only the former to decide
support. (Daniele)
- Couple minor optimizations.
v2: - Avoid introduction of new device info or gt variables and use
existing checks / macros to differentiate the correct GT->PXP
control ownership (Daniele Ceraolo Spurio)
- Don't reuse the updated global-checkers for per-GT callers (such
as other files within PXP) to avoid unnecessary GT-reparsing,
expose a replacement helper like the prior ones. (Daniele).
v1: - Add one more patch to the series for the intel_pxp suspend/resume
for similar refactoring
References: https://patchwork.freedesktop.org/patch/msgid/20221202011407.4068371-1-alan.previn.teres.alexis@intel.com
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208180542.998148-1-alan.previn.teres.alexis@intel.com
GVT Changes:
- gvt-next stuff mostly with refactor for the new MDEV interface.
i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
- Hotplug code clean-up and organization (Jani, Gustavo)
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
The i915 HWMON module will be used to expose voltage, power and energy
values for dGfx. Here we set up i915 hwmon infrastructure including i915
hwmon registration, basic data structures and functions.
v2:
- Create HWMON infra patch (Ashutosh)
- Fixed review comments (Jani)
- Remove "select HWMON" from i915/Kconfig (Jani)
v3: Use hwm_ prefix for static functions (Ashutosh)
v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
doesn't work if hwmon is compiled as a module (Guenter)
v5: Fixed review comments (Jani)
v6: s/kzalloc/devm_kzalloc/ (Andi)
v7: s/hwmon_device_register_with_info/
devm_hwmon_device_register_with_info/ (Ashutosh)
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-2-ashutosh.dixit@intel.com
It turns out that on production DG2/ATS HW we should have support for
PS64. This feature allows to provide a 64K TLB hint at the PTE level,
which is a lot more flexible than the current method of enabling 64K GTT
pages for the entire page-table, since that leads to all kinds of
annoying restrictions, as documented in:
commit caa574ffc4
Author: Matthew Auld <matthew.auld@intel.com>
Date: Sat Feb 19 00:17:49 2022 +0530
drm/i915/uapi: document behaviour for DG2 64K support
On discrete platforms like DG2, we need to support a minimum page size
of 64K when dealing with device local-memory. This is quite tricky for
various reasons, so try to document the new implicit uapi for this.
With PS64, we can now drop the 2M GTT alignment restriction, and instead
only require 64K or larger when dealing with lmem. We still use the
compact-pt layout when possible, but only when we are certain that this
doesn't interfere with userspace.
Note that this is a change in uAPI behaviour, but hopefully shouldn't be
a concern (IGT is at least able to autodetect the alignment), since we
are only making the GTT alignment constraint less restrictive.
Based on a patch from CQ Tang.
v2: update the comment wrt scratch page
v3: (Nirmoy)
- Fix the selftest to actually use the random size, plus some comment
improvements, also drop the rem stuff.
Reported-by: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-1-matthew.auld@intel.com
Daniele needs 84d4333c1e ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
As an integrated GPU, MTL does not have local memory and HAS_LMEM()
returns false. However the platform's stolen memory is presented via
BAR2 (i.e., the BAR we traditionally consider to be the GMADR on IGFX)
and should be managed by the driver the same way that local memory is
on dgpu platforms (which includes setting the "lmem" bit on page table
entries). We use the term "local stolen memory" to refer to this
model.
The major difference from the traditional BAR2 (GMADR) is that
the stolen area is mapped via the BAR2 while in the former BAR2 is an
aperture into the GTT VA through which access are made into stolen area.
BSPEC: 53098, 63830
v2:
1. dropped is_dsm_invalid, updated valid_stolen_size check from Lucas
(Jani, Lucas)
2. drop lmembar_is_igpu_stolen
3. revert to referring GFXMEM_BAR as GEN12_LMEM_BAR (Lucas)
v3:(Jani)
1. rename get_mtl_gms_size to mtl_get_gms_size
2. define register for MMIO address
v4:(Matt)
1. Use REG_FIELD_GET to read GMS value
2. replace the calculations with SZ_256M/SZ_8M
v5: Include more details to commit message on how it is different from
earlier platforms (Anshuman)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Original-author: CQ Tang
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929114658.145287-1-aravind.iddamsetty@intel.com
Going forward, the hardware teams no longer consider new platforms to
have a "generation" in the way we've defined it for past platforms.
Instead, each IP block (graphics, media, display) will have their own
architecture major.minor versions and stepping ID's which should be read
directly from a register in the MMIO space.
Bspec: 63361, 64111
v2:
- Move the IP version readout to intel_device_info.c
- Convert the macro into a function
v3:
- Move subplatform init to runtime early init
- Cache runtime ver, release info to compare with hardware values.
- Use IP_VER for snaity check(MattR)
v4:
- Minor doccumentation changes.
- Normalize HAS_GMD_ID macro value.(JaniN)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916014648.1310346-2-radhakrishna.sripada@intel.com
drm/i915 feature pull #2 for v6.1:
Features and functionality:
- More Meteorlake platform enabling (Radhakrishna, Imre, Madhumitha)
- Allow seamless M/N changes on eDP panels that support it (Ville)
- Switch DSC debugfs from output bpp to input bpc (Swati)
Refactoring and cleanups:
- Clocking and DPLL refactoring and cleanups to support seamless M/N (Ville)
- Plenty of VBT definition and parsing updates and cleanups (Ville)
- Extract SKL watermark code to a separate file, and clean up (Ville)
- Clean up IPC interfaces and debugfs (Jani)
- Continue moving display data under drm_i915_private display sub-struct (Jani)
- Display quirk handling refactoring and abstractions (Jani)
- Stop using implicit dev_priv in gmbus registers (Jani)
- BUG_ON() removals and conversions to drm_WARN_ON() and BUILD_BUG_ON() (Jani)
- Use drm_dp_phy_name() for logging (Jani)
- Use REG_BIT() macros for CDCLK registers (Stan)
- Move display and media IP versions to runtime info (Radhakrishna)
Fixes:
- Fix DP MST suspend to avoid use-after-free (Andrzej)
- Fix HPD suspend to avoid use-after-free for fbdev (Andrzej)
- Fix various PSR issues regarding selective update and damage clips (Jouni)
- Fix runtime pm wakerefs for driver remove and release (Mitul Golani)
- Fix conditions for filtering fixed modes for panels (Ville)
- Fix TV encoder clock computation (Ville)
- Fix dvo mode_valid hook return type (Nathan Huckleberry)
Merges:
- Backmerge drm-next to sync the DP MST atomic changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o7vfr064.fsf@intel.com
drm/i915 feature pull for v6.1:
Features and functionality:
- Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani)
- Support more HDMI pixel clock frequencies on DG2 (Clint)
- Sanity check PCI BARs (Piotr Piórkowski)
- Enable DC5 on DG2 (Anusha)
- DG2 DMC firmware version bump to v2.07 (Madhumitha)
- New ADL-S PCI ID (José)
Refactoring and cleanups:
- Add display sub-struct to struct drm_i915_private (Jani)
- Add initial runtime info to device info (Jani)
- Split out HDCP and backlight registers to separate files (Jani)
Fixes:
- Skip wm/ddb readout for disabled pipes (Ville)
- HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz)
- Fix bw init null pointer dereference (Łukasz Bartosik)
- Disable PPS power hook for DP AUX backlight (Jouni)
- Avoid warnings on registering multiple backlight devices (Arun)
- Fix dual-link DSI backlight and CABC ports for display 11+ (Jani)
- Fix Type-C PHY ownership programming in HDMI legacy mode (Imre)
- Fix unclaimed register access while loading PIPEDMC-C/D (Imre)
- Bump up CDCLK for DG2 (Stan)
- Prune modes that require HDMI 2.1 FRL (Ankit)
- Disable FBC when PSR1 is enabled in display 12-13 (Matt)
- Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre)
- Disable PSR before disable pipe (José)
- Disable DMC handlers during firmware loading/disabling on display 12+ (Imre)
- Disable clock gating for PIPEDMC-A/B as a workaround (Imre)
Merges:
- Two drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k06rfaku.fsf@intel.com
Top-level handling of standalone media interrupts will be processed as
part of the primary GT's interrupt handler (since primary and media GTs
share an MMIO space, unlike remote tile setups). When we get down to
the point of handling engine interrupts, we need to take care to lookup
VCS and VECS engines in the media GT rather than the primary.
There are also a couple of additional "other" instance bits that
correspond to the media GT's GuC and media GT's power management
interrupts; we need to direct those to the media GT instance as well.
Bspec: 45605
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-15-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
