The flags stored in the BO grew over time without following
much a naming pattern. First of all, get rid of the _BIT suffix that was
banned from everywhere else due to the guideline in
drivers/gpu/drm/i915/i915_reg.h that xe kind of follows:
Define bits using ``REG_BIT(N)``. Do **not** add ``_BIT`` suffix to the name.
Here the flags aren't for a register, but it's good practice to keep it
consistent.
Second divergence on names is the use or not of "CREATE". This is
because most of the flags are passed to xe_bo_create*() family of
functions, changing its behavior. However, since the flags are also
stored in the bo itself and checked elsewhere in the code, it seems
better to just omit the CREATE part.
With those 2 guidelines, all the flags are given the form
XE_BO_FLAG_<FLAG_NAME> with the following commands:
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i \
-e "s/XE_BO_\([_A-Z0-9]*\)_BIT/XE_BO_\1/g" \
-e 's/XE_BO_CREATE_/XE_BO_FLAG_/g'
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i -r \
-e 's/XE_BO_(DEFER_BACKING|SCANOUT|FIXED_PLACEMENT|PAGETABLE|NEEDS_CPU_ACCESS|NEEDS_UC|INTERNAL_TEST|INTERNAL_64K|GGTT_INVALIDATE)/XE_BO_FLAG_\1/g'
And then the defines in drivers/gpu/drm/xe/xe_bo.h are adjusted to
follow the coding style.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322142702.186529-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Starting on Xe2, the GSCCS engine reset is a 2-step process. When the
driver or the GuC hits the GDRST register, the CS is immediately reset
and a success is reported, but the GSC shim continues its reset in the
background. While the shim reset is ongoing, the CS is able to accept
new context submission, but any commands that require the shim will
be stalled until the reset is completed. This means that we can keep
submitting to the GSCCS as long as we make sure that the preemption
timeout is big enough to cover any delay introduced by the reset; since
the GSC preempt timeout is not tunable at runtime, we only need to check
that the value set in kconfig is big enough (and increase it if it
isn't).
When the shim reset completes, a specific CS interrupt is triggered,
in response to which we need to check the GSCI_TIMER_STATUS register
to see if the reset was successful or not.
Note that the GSCI_TIMER_STATUS register is not power save/restored,
so it gets reset on MC6 entry. However, a reset failure stops MC6,
so in that scenario we're always guaranteed to find the correct value.
Since we can't check the register within interrupt context, the
existing GSC worker has been updated to handle it.
The expected action to take on ER failure is to trigger a driver FLR,
but we still don't support that, so for now we just print an error. A
comment has been added to the code to keep track of the FLR requirement.
v2: Add a check for the initial timeout value (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304145634.820684-1-daniele.ceraolospurio@intel.com
Recommendation is to read FUSE4 register to check if WMTP has been
enabled/disabled by HW. If enabled we don't need to do anything special,
however if disabled recommendation is to also disable the WMTP mode in
the FF_SLICE_CS_CHICKEN2 register, falling back to thread-group and
mid-batch preemption only. However on Linux, the per-context CS_CHICKEN1
is how userspace controls pre-emption, so instead use the default lrc to
disable WMTP using CS_CHICKEN1, if disabled by HW. Userspace is still
free to set CS_CHICKEN1 to whatever they want later.
v2: remove redundant version check and also add descriptive name(Matt)
v3: remove usage of REG_FIELD_GET(Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20240104182615.21327-1-nirmoy.das@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When interrupts are delivered using memory based mechanism, engines
will write status to the report page at the offset (in bytes) that
corresponds to their interrupt bit from the GT_INTR_DW register.
Add engine interrupt offset definitions to engine info as we will
need this to process memory based interrupts.
Bspec: 46149, 50829, 50844
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231214185955.1791-6-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Disable dynamic HW load balancing of compute resource assignment
to engines and instead enabled fixed mode of mapping compute
resources to engines on all platforms with more than one compute
engine.
By default enable only one CCS engine with all compute slices
assigned to it. This is the desired configuration for common
workloads.
PVC platform supports only the fixed CCS mode (workaround 16016805146).
v2: Rebase, make it platform agnostic
v3: Minor code refactoring
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A helper for managed BO allocations makes it possible to remove specific
"fini" actions and will simplify the following patches adding ability to
execute a release action for specific BO directly.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the GSCCS to the media_xelpmp engine list. Note that since the
GSCCS is only used with the GSC FW, we can consider it disabled if we
don't have the FW available.
v2: mark GSCCS as allowed on the media IP in kunit tests
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It was reading (base) + 0x8c but that is not a valid register
and instead it should read (base) + 0x68.
So here reading the correct register and removing the wrong and
duplicated.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The guc_submission_enabled() function is being used as a boolean toggle
for all firmwares and all related features, not just GuC submission. We
could add additional flags/functions to distinguish and allow different
use-cases (e.g. loading HuC but not using GuC submission), but given
that not using GuC is a debug-only scenario having a global switch for
all FWs is enough. However, we want to make it clear that this switch
turns off everything, so rename it to uc_enabled().
v2: rebase on s/XE_WARN_ON/xe_assert
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The XE_WARN_ON macro maps to WARN_ON which is not justified
in many cases where only a simple debug check is needed.
Replace the use of the XE_WARN_ON macro with the new xe_assert
macros which relies on drm_*. This takes a struct drm_device
argument, which is one of the main changes in this commit. The
other main change is that the condition is reversed, as with
XE_WARN_ON a message is displayed if the condition is true,
whereas with xe_assert it is if the condition is false.
v2:
- Rebase
- Keep WARN splats in xe_wopcm.c (Matt Roper)
v3:
- Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add sysfs entries for the min, max, and defaults for each of
engine scheduler controls for every hardware engine class.
Non-elevated user IOCTLs to set these controls must be within
the min-max ranges of the sysfs entries, elevated user can set
these controls to any value. However, introduced compile time
CONFIG min-max values which restricts elevated user to be in
compile time min-max range if at all sysfs min/max are violated.
Sysfs entries examples are,
DUT# cat /sys/class/drm/cardX/device/tileN/gtN/engines/ccs/.defaults/
job_timeout_max job_timeout_ms preempt_timeout_min timeslice_duration_max timeslice_duration_us
job_timeout_min preempt_timeout_max preempt_timeout_us timeslice_duration_min
DUT# cat /sys/class/drm/card1/device/tileN/gtN/engines/ccs/
.defaults/ job_timeout_min preempt_timeout_max preempt_timeout_us timeslice_duration_min
job_timeout_max job_timeout_ms preempt_timeout_min timeslice_duration_max timeslice_duration_us
V12:
- Rebase
V11:
- Make engine_get_prop_minmax and enforce_sched_limit static - Matt
- use enum in place of string in engine_get_prop_minmax - Matt
- no need to use enforce_sched_limit or no need to filter min/max
per user type in sysfs - Matt
V10:
- Add kernel doc for non-static func
- Make helper to get min/max for range validation - Matt
- Filter min/max per user type
V9 :
- Rebase to use s/xe_engine/xe_hw_engine/ - Matt
V8 :
- fix enforce_sched_limit and avoid code duplication - Niranjana
- Make sure min < max - Niranjana
V7 :
- Rebase to replace hw engine with eclass interface
- return EINVAL in place of EPERM
- Use some APIs to avoid code duplication
V6 :
- Rebase changes to reflect per engine class props interface - MattB
- Use #if ENABLED - MattB
- Remove MAX_SCHED_TIMEOUT check as range validation is enough
V5 :
- Rebase to resolve conflicts - CI
V4 :
- Rebase
- Update commit to reflect tile addition
- Use XE_HW macro directly as they are already filtered
for CONFIG checks - Niranjana
- Add CONFIG for enable/disable min/max limitation
on elevated user. Default is enable - Matt/Joonas
V3 :
- Resolve CI hooks warning for kernel-doc
V2 :
- Restric min/max setting to #define default min/max for
elevated user - Himal
- Remove unrelated changes from patch - Niranjana
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For each HW engine under GT we are adding defaults sysfs
entry to list all engine scheduler properties and its
default values. So that it will be easier for user to
fetch default values of these properties anytime to go
back to default.
For example,
DUT# cat /sys/class/drm/card1/device/tileN/gtN/engines/bcs/.defaults/
job_timeout_ms preempt_timeout_us timeslice_duration_us
where,
@job_timeout_ms: The time after which a job is removed from the scheduler.
@preempt_timeout_us: How long to wait (in microseconds) for a preemption
event to occur when submitting a new context.
@timeslice_duration_us: Each context is scheduled for execution for the
timeslice duration, before switching to the next
context.
V12:
- Add missing drmm_add_action_or_reset and remove sysfs files
V11:
- Rebase
V10:
- Remove xe_gt.h inclusion from .h - Matt
V9 :
- Remove jiffies for job_timeout_ms - Matt
V8 :
- replace xe_engine with xe_hw_engine - Matt
V7 :
- Push all errors to one error path at every places - Niranjana
- Describe struct member to resolve kernel doc err - CI hooks
V6 :
- Use engine class interface instead of hw engine
in sysfs for better interfacing readability - Niranjana
V5 :
- Scheduling props should apply per class engine not per hardware engine - Matt
- Do not record value of job_timeout_ms if changed based on dma_fence - Matt
V4 :
- Resolve merge conflicts - CI
V3 :
- Rearrange code in its own file
- Rebase
- Update commit message to reflect tile addition
V2 :
- Use sysfs_create_files in this patch - Niranjana
- Handle prototype error for xe_add_engine_defaults - CI hooks
- Remove unused member sysfs_hwe - Niranjana
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace calls to XE_BUG_ON() with calls XE_WARN_ON() which in turn calls
WARN() instead of BUG(). BUG() crashes the kernel and should only be
used when it is absolutely unavoidable in case of catastrophic and
unrecoverable failures, which is not the case here.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The majority of xe_gt_irq_postinstall() is really focused on the
hardware engine interrupts; other GT-related interrupts such as the GuC
are enabled/disabled independently. Renaming the function and making it
truly GT-specific will make it more clear what the intended focus is.
Disabling/masking of other interrupts (such as GuC interrupts) is
unnecessary since that has already happened during the irq_reset stage,
and doing so will become harmful once the media GT is re-enabled since
calls to xe_gt_irq_postinstall during media GT initialization would
incorrectly disable the primary GT's GuC interrupts.
Also, since this function is called from gt_fw_domain_init(), it's not
necessary to also call it earlier during xe_irq_postinstall; just
xe_irq_resume to handle runtime resume should be sufficient.
v2:
- Drop unnecessary !gt check. (Lucas)
- Reword some comments about enable/unmask for clarity. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-26-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The selection between hwe and gt is exposed to the outside of rtp, by
the xe_rtp_process() function. However it doesn't make seense from the
caller point of view to pass a hwe and a gt as argument since the gt
should always be the one containing the hwe.
This clarifies the interface by separating the context creation into an
initializer. The initializer then passes the correct value and there
should never be a case with hwe and gt set: when hwe is passed, the gt
is the one containing it. Internally the functions continue receiving
the argument separately.
v2: Leave the device-only context to a separate patch if they are indeed
needed later
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230526164358.86393-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The goal is to allow for a snapshot capture to be taken at the time
of the crash, while the print out can happen at a later time through
the exposed devcoredump virtual device.
v2: Addressing these Matthew comments:
- Handle memory allocation failures.
- Do not use GFP_ATOMIC on cases like debugfs prints.
- placement of @reg doc.
- identation issues.
v3: checkpatch
v4: Rebase and get back to GFP_ATOMIC only.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
