Microchip ARM64 device tree updates for v7.1
This update includes:
- device tree files for the Microchip LAN9691 SoC and its evaluation
board (Microchip EV23X71A)
* tag 'microchip-dt64-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: add EV23X71A board
dt-bindings: arm: AT91: document EV23X71A board
arm64: dts: microchip: add LAN969x support
arm64: dts: microchip: add LAN969x clock header file
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
arm64: tegra: Device tree changes for v7.1-rc1
Various fixes and new additions across a number of devices. GPIO and PCI
are enabled on Tegra264 and the Jetson AGX Thor Developer Kit, allowing
it to boot via network and mass storage.
* tag 'tegra-for-7.1-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add Tegra264 GPIO controllers
arm64: tegra: smaug: Enable SPI-NOR flash
arm64: tegra: Add Jetson AGX Thor Developer Kit support
arm64: tegra: Add PCI controllers on Tegra264
arm64: tegra: Fix RTC aliases
arm64: tegra: Drop redundant clock and reset names for TSEC
arm64: tegra: Fix snps,blen properties
dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Qualcomm Arm64 DeviceTree updates for v7.1
Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.
Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note
8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,
Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core Prime
LTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS Vivobook
S15, the Eliza MTP, and the Glymur and Mahua CRDs.
Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,
SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoT
EVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support on
the ASUS Zenbook A14. Reduce the duplication of thermal sensors across
Purwa and Hamoa.
Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe and
enable the eMMC controller on IPQ9574.
Add display, audio/compute remoteprocs, QUP devices, thermal sensors,
display, and CoreSight on the Kaanapali platform. Enable audio, compute
display, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio and
compute remoteprocs on QRD.
Add role-switching support for the tertiary USB controller on Lemans.
Enable the tertiary USB controller and the GPIO expander on the Lemans
EVK, and add an overlay for the IFP Mezzanine.
Add UFS, camera control interface, audio GPR, and FastRPC support on
Milos. Enable UFS, camera EEPROMs, and hall effect sensor on the
Fairphone FP6.
Add camera control interface and fix a variety of things on the Monaco
platform, add missing FastRPC compute banks. Add eMMC support, describe
the DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlay
for EVK camera and the IFP mezzanine.
Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-id
on the 4A.
Add the ambient light and proximity sensor on the Asus ZenFone 2
Laser/Selfie.
On Kodiak-based boards, enable the ethernet and USB Type-A ports on the
Rb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth on
the IDP, and add front camera support on the Fairphone FP5.
Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.
Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DP
bridge on the Ride board.
Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.
The describe the DSI/DP bringde on the Arduino UnoQ.
01022af2d2 arm64: dts: qcom: sc7280-chrome-common: disable Venus
Introduce DSI display support on SC8280XP.
Add LLCC on SDM670 and another SPI controller on SDM630.
Properly describe the WiFi/BT chip on a variety of SDM845-based
devices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6T
devices.
Introduce the PRNG, describe the debug UART, and add the MDSS core reset
on SM6125. Enable the debug UART and fix various issues on the Xiaomi
Redmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.
Properly describe the WiFi/BT combo chip in SM8150 HDK.
Improve the EAS properties on SM8550, in addition to various other
fixes. Introduce a new overlay for the HDK display card.
Introduce various smaller fixes across SM8450 and SM8650.
Add display support on SM8750 and enable DSI and DisplayPort on the MTP.
Also add tsens and thermal-zones.
Add ETR devices, flatten the USB controller node, and mark USB
controllers as wakeup-capable devices, on Talos.
Properly describe the IPA IMEM slice on a variety of platforms.
Drop redundant non-controllable regulator definitions from a variety of
boards.
Drop redundant VSYNC pin state definition from various platforms.
* tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (254 commits)
arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP
arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay
arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
dt-bindings: qcom: Document samsung,coreprimeltevzw
arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC
arm64: dts: qcom: sdm670: add llcc
arm64: dts: qcom: qcm6490-fairphone-fp5: Add front camera support
arm64: dts: qcom: qcm6490-fairphone-fp5: Sort pinctrl nodes by pins
arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses
arm64: dts: qcom: milos: Add CCI busses
arm64: dts: qcom: purwa-iot-evk: Enable UFS
arm64: dts: qcom: eliza: Add thermal sensors
arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP
arm64: dts: qcom: sdm845-oneplus: Describe Wi-Fi/BT properly
arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly
arm64: dts: qcom: drop redundant zap-shader memory-region
arm64: dts: qcom: fix remaining gpu_zap_shader labels
arm64: dts: qcom: msm8996: fix indentation in sdhc2 node
arm64: dts: qcom: monaco-evk: enable UART6 for robot expansion board
arm64: dts: qcom: lemans-evk: enable UART0 for robot expansion board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: soc/omap updates for v7.1
* tag 'omap-for-v7.1/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New board, the Khadas Edge 2L. Newly added peripherals are the
OTP nvmem controllers for RK3528, RK3562 and RK3566/8, SPDIF on RK3576.
The RK3566/8 SoCs now also control the Pipe-clocks on their PCIe
controllers and UFSHC controller on RK3576 got an additional reset line.
Apart from that are of course individual board changes and fixes for
older issues that are not specific to the current development cycle.
* tag 'v7.1-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (44 commits)
arm64: dts: rockchip: configure hdmirx in Rock 5 ITX
arm64: dts: rockchip: assign pipe clock to rk356x PCIe lanes
arm64: dts: rockchip: Add mphy reset to ufshc node
arm64: dts: rockchip: Enable OTP controller for RK3528
arm64: dts: rockchip: Enable OTP controller for RK356x
arm64: dts: rockchip: Enable OTP controller for RK3562
arm64: dts: rockchip: Enable PCIe CLKREQ# for RK3588 on Rock 5b-5bp-5t series
arm64: dts: rockchip: add SD/eMMC aliases for ArmSom Sige5
arm64: dts: rockchip: Add SPDIF nodes to RK3576 device tree
arm64: dts: rockchip: Add Khadas Edge 2L board
dt-bindings: arm: rockchip: Add Khadas Edge 2L board
arm64: dts: rockchip: Fix RK3562 EVB2 model name
arm64: dts: rockchip: Correct Joystick Axes on Gameforce Ace
arm64: dts: rockchip: Correct Fan Supply for Gameforce Ace
Revert "arm64: dts: rockchip: add SPDIF audio to Beelink A1"
arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi
arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander
arm64: dts: rockchip: Add analog audio switches to RK3576 EVB1
arm64: dts: rockchip: Enable GPU on rk3566-pinenote
arm64: dts: rockchip: Make Jaguar PCIe-refclk pin use pull-up config
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 device tree updates for v7.1
Generic Fixes/Cleanups:
- k3-pinctrl: Cleanup alignment and reorder macros
- ti,min-output-impedance addition to all K3 board DT files
SoC Specific Features and Fixes:
AM62L:
- Add RNG node
- Support cpufreq scaling
J721S2:
- Make MAIN domain system control bus a simple-bus
- Add second DSI node
J722S:
- Add main_i2c4 device node
J7200:
- Make MAIN domain system control bus a simple-bus
Board Specific Features and Fixes:
AM642 EVM:
- Add ICSSG0 overlay for dual EMAC support
AM62:
- LP-SK: Enable internal pulls for MMC0 data pins
- SK: Enable Main UART wakeup
- phycore-som: Add 128MiB of global CMA
- Verdin: Add Zinnia board support and misc cleanup
AM62A7-SK:
- Enable Main UART wakeup
- Fix pin name in comment from M19 to N22
AM62D2 EVM:
- Enable Main UART wakeup and set wakeup-source system-states
AM62L3 EVM:
- Disable MMC1 internal pulls on data pins
- Enable Main UART wakeup and enable wkup_uart0 pins/target node
AM62P:
- SK: Disable MMC1 internal pulls on data pins and enable Main UART
wakeup
- Verdin: Add Zinnia support and misc cleanup
AM68 PHYBoard:
- Add DSI->LVDS bridge, LVDS-Display overlay and PEB-AV-15 overlay
AM69 Aquila:
- Fix DP regulator enable GPIO
J721S2 CPB:
- Add QSPI flash partition details
Removal of SMARC-sAM67 board:
- Kontron SMARC-sAM67 board support along with all bindings
are dropped as board is no longer planned for production
* tag 'ti-k3-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (47 commits)
arm64: dts: ti: k3-pinctrl: sort shift values numerically
arm64: dts: ti: k3-pinctrl: consistently use tabs for alignment
arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
arm64: dts: ti: k3-am62p-verdin: Add Zinnia
arm64: dts: ti: k3-am62p-verdin: Add SPI_1_CS as GPIO
arm64: dts: ti: k3-am62p-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Add Zinnia
arm64: dts: ti: k3-am62-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Fix SPI_1 GPIO CS pinctrl label
dt-bindings: arm: ti: Add verdin am62/am62p zinnia board
arm64: dts: ti: k3-j721s2: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-j7200: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-am62-lp-sk: Enable internal pulls for MMC0 data pins
arm64: dts: ti: k3-am62l3-evm: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62p5-sk: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62d2-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62p5-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62x-sk-common: Enable Main UART wakeup
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoCFPGA DTS updates for v7.1
- dt-bindings updates:
- Document fallback compatible for Stratix10 SoCDK eMMC board
- Document compatible for the Agilex5 SoCFPGA modular board
- Add emmc support for the Stratix10
- Drop CPU masks from the GICv3 PPI interrupts for Agilex5
* tag 'socfpga_updates_for_v7.1_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: agilex5: Drop CPU masks from GICv3 PPI interrupts
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: stratix10: Add emmc support
dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC variant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v7.1
1. New board: Exynos5250 based Google Manta (Nexus 10).
2. Few cleanups.
* tag 'samsung-dt-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exyons4412: Drop duplicated I2C address/size-cells
ARM: dts: exynos4210-smdkv310: Drop duplicated I2C address/size-cells
ARM: dts: exynos3250: Drop duplicated I2C address/size-cells
ARM: dts: exynos: Add Google Manta (Nexus 10)
dt-bindings: ARM: samsung: Add Google Manta (Nexus 10)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v7.1
1. Add initial support for Axis ARTPEC-9 SoC and Alfred board using it.
Just like ARTPEC-8, this is a derivative of Samsung Exynos SoC made
for Axis, sharing most or all of core SoC blocks with Samsung
designs.
2. New boards: Exynos7870 based Samsung Galaxy J7 (2016) and Samsung
Galaxy J5 (2017).
3. Google GS101 Pixel phone: describe all PMIC regulators and Maxim
fuel-gauge.
4. ExynosAutov920: add G3D (GPU) clock controller (CMU).
* tag 'samsung-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos8895: Move I2C address/size-cells to DTSI
arm64: dts: exynos7870: Move I2C address/size-cells to DTSI
arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 fuel gauge
arm64: dts: exynos: add initial support for Samsung Galaxy J5
dt-bindings: arm: samsung: add compatible for samsung-j5y17lte
arm64: dts: exynosautov920: add CMU_G3D clock DT nodes
arm64: dts: exynos: gs101-pixel: add all S2MPG1x regulators
arm64: dts: exynos: add initial support for Samsung Galaxy J7 (2016)
dt-bindings: arm: samsung: add compatible for samsung-j7xelte
arm64: dts: axis: artpec9: Fix missing soc unit address
arm64: dts: axis: Add ARTPEC-9 Alfred board support
arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support
dt-bindings: arm: axis: Add ARTPEC-9 alfred board
dt-bindings: clock: Add ARTPEC-9 clock controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stratix 10 devkit support a separate eMMC daughter card. Add compatible
string for the Stratix 10 SoCDK eMMC daughter board with
"altr,socfpga-stratix10-socdk" as a fallback, since this variant is based
on the standard SoCDK board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The six PCIe controllers found on Tegra264 are of two types: one is used
for the internal GPU and therefore is not connected to a UPHY and the
remaining five controllers are typically routed to a PCI slot and have
additional controls for the physical link.
While these controllers can be switched into endpoint mode, this binding
describes the root complex mode only.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Armv8 Juno/FVP/Vexpress updates for v7.1
1. The primary addition is initial support for Zena CSS that includes:
a new binding compatibility, a shared `zena-css.dtsi` description, and
an FVP device tree.
2. Extension of Corstone-1000 FVP platform support with binding updates
to add the new `arm,corstone1000-a320-fvp` platform, and the
`arm,corstone1000-ethos-u85` NPU integration.
Overall, this combines new platform enablement with some DTS layout
cleanup for Arm reference FVP based systems.
* tag 'juno-updates-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm/corstone1000: Add corstone-1000-a320
arm64: dts: arm/corstone1000: Move FVP peripherals to separate .dtsi
arm64: dts: arm/corstone1000: Move cpu nodes
dt-bindings: npu: arm,ethos: Add "arm,corstone1000-ethos-u85"
dt-bindings: arm,corstone1000: Add "arm,corstone1000-a320-fvp"
arm64: dts: zena: Move SRAM into SoC and memory node out of SoC
arm64: dts: zena: Add support for Zena CSS
dt-bindings: arm: Add Zena CSS compatibility
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
MediaTek ARM64 DeviceTree updates
This adds fixes and improvements for already supported devices.
In particular:
- The gpio-ranges pin could was fixed in MT6795, MT7981B, and
MT7986A SoCs, as the very last GPIO was unusable; Even though
anyway unused, this fixes the hardware description.
- Model string fixes for Bananapi BPI-R4 Pro 4E/8X: now the
correct model is shown.
- The MT6359 PMIC gets disambiguation for two default regulator
names, mainly fixing issues seen on U-Boot, but also making
the regulators visually distinguishable in a summary...!
- Aliases for eMMC/SD controllers added in MT8365 EVK board,
MT8395 Radxa NIO-12L and Genio 1200 for consistency
- Fixes to the MediaTek AUDSYS devicetree binding
....and honorable mention goes to:
- MT8195 Cherry Chromebooks get their WiFi on PCI Express and
Bluetooth on USB described with the proper power supplies now
tied to the correct devices (USB VBUS and PCIE3v3): this is
now described almost perfectly, or at least links the right
resources in the right places.
This is also done as a preparation for when the M.2 E-Key
connector binding will be upstreamed.
- MT8195 Cherry Dojo gets its M.2 M-Key slot correctly described
with the new pcie-m2-m-connector binding.
* tag 'mtk-dts64-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt7986a: Fix gpio-ranges pin count
arm64: dts: mediatek: mt7981b: Fix gpio-ranges pin count
arm64: dts: mediatek: mt6795: Fix gpio-ranges pin count
dt-bindings: arm: mediatek: audsys: fix formatting issues
arm64: dts: mediatek: mt8195-cherry-dojo: Describe M.2 M-key NVMe slot
arm64: dts: mediatek: mt8195-cherry: add WiFi PCIe and BT USB power supplies
arm64: dts: mediatek: mt7988a-bpi-r4pro: fix model string
arm64: dts: mt8167: Reorder nodes according to mmio address
arm64: dts: mediatek: mt6359: give regulators unique names
arm64: dts: mediatek: mt8365: Describe infracfg-nao as a pure syscon
arm64: dts: mediatek: mt8365-evk: add mmc aliases
arm64: dts: mediatek: mt8395-radxa-nio-12l: add mmc aliases
arm64: dts: mediatek: mt8395-genio-common: add mmc aliases
arm64: dts: mediatek: mt8195-cherry: Disable xhci1 completely
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Document the device tree bindings for the Renesas RZ/G3L SoC Clock Pulse
Generator (CPG). RZ/G3L CPG is similar to RZ/G2L CPG but has 5 clocks
compared to 1 clock on other SoCs.
Also define RZ/G3L (R9A08G046) Clock Pulse Generator Core Clocks, as
listed in section 4.4.4.1 ("Block Diagram of the Clock System"), module
clock outputs, as listed in section 4.4.2 ("Clock List r1.00") and add
Reset definitions referring to registers CPG_RST_* in Section 4.4.3
("Register") of the RZ/G3L Hardware User's Manual (Rev.1.00 Oct, 2025).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324114329.268249-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Merge the Eliza interconnect DeviceTree bindings from topic branch, in
order to introduce the interconnect constants used in the Eliza
DeviceTree source.
