A number of dt-schema cleanups that are log standing, so not suitable
as fix for the current release.
* tag 'v7.1-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Pass linux,code to the power key on rk3288-veyron-pinky
ARM: dts: rockchip: Fix LED node names on rk3288-phycore-rdk
ARM: dts: rockchip: Fix GMAC description n RK3288 boards
ARM: dts: rockchip: Fix RTC description on rk3288-firefly-reload
ARM: dts: rockchip: Add missing the touchscreen interrupt on rk3288-phycore-rdk
ARM: dts: rockchip: Fix the trackpad supply on rk3288-veyron-jerry
ARM: dts: rockchip: Fix the Bluetooth node name on rk3288-veyron
ARM: dts: rockchip: Remove invalid regulator-property from rk3288-veyron
ARM: dts: rockchip: Use mount-matrix on rk3188-bqedison2qc
ARM: dts: rockchip: Fix RTC compatible on rk3288-phycore-rdk
ARM: dts: rockchip: Move PHY reset to ethernet-phy node on rk3036 boards
ARM: dts: rockchip: Remove rockchip,grf from rk3288 tsadc
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
ARM: tegra: Device tree changes for v7.1-rc1
Various improvements for Tegra114 boards, as well as some legacy cleanup
for PAZ00 and Transformers devices.
* tag 'tegra-for-7.1-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: paz00: Configure WiFi rfkill switch through device tree
ARM: tegra: transformers: Add connector node
ARM: tegra: Add External Memory Controller node on Tegra114
ARM: tegra: Add ACTMON node to Tegra114 device tree
ARM: tegra: lg-x3: Add node for capacitive buttons
ARM: tegra: lg-x3: Add USB and power related nodes
ARM: tegra: lg-x3: Add panel and bridge nodes
ARM: tn7: Adjust panel node
ARM: tegra: Add SOCTHERM support on Tegra114
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
ARM: soc/omap updates for v7.1
* tag 'omap-for-v7.1/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
spear13xx.dtsi defines a thermal_flags property in spear thermal sensor
node which is both unused in kernel and undocumented in spear thermal
sensor's binding.
There were no dtbs_check warnings associated with this property as the
underlying spear thermal binding was not converted to DTSchema.
Most likely st,thermal-flags is a misspelling of thermal_flags in
spear13xx.dtsi. Since both st/spear1310.dtsi and st/spear1340.dtsi
define st,thermal-flags property in spear thermal sensor node, we can
safely remove this property from spear13xx.dtsi.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20260329123449.309814-3-krishnagopi487@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm32 DeviceTree updates for v7.1
Qualcomm APQ8084 is incomplete and hasn't seen functional contributions
since 2016, so drop the platform (for now?). Also drop a number of
unused IPQ-related dtsi files.
Lastly clean up the RPM bus clocks in MSM8974 interconnect nodes.
* tag 'qcom-arm32-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974: Drop RPM bus clocks
ARM: dts: qcom: drop apq8084 support
ARM: dts: qcom: Drop unused .dtsi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v7.1
1. New board: Exynos5250 based Google Manta (Nexus 10).
2. Few cleanups.
* tag 'samsung-dt-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exyons4412: Drop duplicated I2C address/size-cells
ARM: dts: exynos4210-smdkv310: Drop duplicated I2C address/size-cells
ARM: dts: exynos3250: Drop duplicated I2C address/size-cells
ARM: dts: exynos: Add Google Manta (Nexus 10)
dt-bindings: ARM: samsung: Add Google Manta (Nexus 10)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:
- Rafal provides a complete description of the PCIe Root Complex nodes
in order to silence a number of dtc warnings
- Rosen provides the necessary NVMEM properties to allow describing the
WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
and Wi-Fi buttons for the Linksys EA9200 router
- Linus completes the BCA devices description by adding the I2C block
and fixing interrupts for the DMA block on 63138 and 6878
* tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: EA9200: specify partitions
ARM: dts: BCM5301X: EA9200: add LEDs
ARM: dts: BCM5301X: EA9200: add USB GPIOs
ARM: dts: BCM5301X: EA9200: add WiFi button
ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level
ARM: dts: bcm63148: Add I2C block
ARM: dts: bcm63138: Add I2C block
ARM: dts: bcm6878: Add I2C bus block
ARM: dts: bcm6855: Add I2C bus blocks
ARM: dts: bcm6846: Add I2C bus block
ARM: dts: bcm63138: Fix DMA IRQ
ARM: dts: bcm6878: Fix PL081 DMA block IRQ
ARM: dts: BCM5301X: AC5300: set WAN MAC from nvram
ARM: dts: BCM5301X: AC3100: set WAN MAC from nvram
ARM: dts: BCM5301X: panamera: set WAN MAC from nvram
ARM: dts: BCM5301X: EA9200: set WAN MAC from nvram
ARM: dts: BCM5301X: add root pcie bridges
ARM: dts: BCM5301X: Drop extra NAND controller compatible
ARM: dts: BCM5301X: Describe PCIe controllers fully
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add devicetree overlay for the Seeed Studio BeagleBone HDMI cape, which
provides HDMI output via an ITE IT66121 HDMI bridge and audio support
through McASP.
The cape is designed for BeagleBone Green but is also compatible with
BeagleBone and BeagleBone Black due to pin compatibility.
Link: https://www.seeedstudio.com/Seeed-Studio-BeagleBoner-Green-HDMI-Cape.html
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
As of d64c732dfc ("net: rfkill: gpio: add DT support") rfkill-gpio
device can be instantiated via device tree.
Add the declaration there and drop board-paz00.c file and relevant
Makefile fragments.
Tested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All ASUS Transformers have micro-HDMI connector directly available.
After Tegra HDMI got bridge/connector support, we should use connector
framework for proper HW description.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for ACTMON on Tegra114. This is used to monitor activity from
different components. Based on the collected statistics, the rate at which
the external memory needs to be clocked can be derived.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Both smartphones have capacitive buttons but only P895 supports RMI4
function 1A (0D touch), while P880 exposes buttons area as a region of the
touchscreen.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing charger, MUIC and ADC sensor nodes. Reconfigure USB, set one
of the ADC channels as the fuel gauge temperature sensor and add a battery
thermal zone.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add RGB-DSI bridge and panel nodes to LG Optimus 4X and Vu device trees.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
MediaTek ARM32 Device Tree Updates
This adds a single commit fixing a dtbs_check validation error
by changing the fallback compatible of the efuse node to the
correct one in MT7623.
* tag 'mtk-dts32-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: mt7623: fix efuse fallback compatible
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
When checking dts involving the r9a06g032.dtsi file, the following kind
of warnings are reported:
Missing property '#address-cells' in node xxx, using 0 as fallback
Indeed, #address-cells is not present in the GIC interrupt controller
node.
Fix it adding the missing property.
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property in PCI node and in IRQ mux node consists of
several components and the component related to "parent unit
address", which size is defined by '#address-cells' of the node
pointed to by the interrupt-parent component, is not used (=0)
No functional change.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260325095718.388157-1-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The following DTOs are supported on STM32MP15xx DHCOM PDK2:
- DH 460-200 SRAM board in header X11
- DH 497-200 adapter card with EDT ETM0700G0EDH6 Parallel RGB panel
- DH 505-200 adapter card with Chefree CH101OLHLWH-002 LVDS panel
- DH 531-100 SPI/I2C board in header X21
- DH 531-200 SPI/I2C board in header X22
- DH 560-200 7" LCD board in header X12
- DH 638-100 mezzanine card with RPi 7" DSI panel attached on top
- DH 672-100 expansion card, which contains CAN/FD transceiver and
enables PDK2 to use one more CAN/FD interface
The following DTOs are supported on STM32MP15xx DHCOM DRC02:
- Enable configuration where the DHSOM inserted into the DRC02 has
RSI 9116 WiFi populated on the SoM and where the microSD slot on
the bottom of DRC02 must not be used.
This permits a non-default configuration of the SoM and DRC02 board
used for custom device setup with on-SoM WiFi.
The following DTOs are supported on STM32MP15xx DHCOM PicoITX:
- DH 548-200 adapter card with Multi-Inno MI0700D4T-6 7" DPI panel
- DH 553-100 adapter card with Team Source Display TST043015CMHX 4.3" DPI panel
- DH 626-100 adapter card with Chefree CH101OLHLWH-002 LVDS panel
The following DTOs are supported on STM32MP15xx DHCOR Avenger96:
- FDCAN1 on low-speed expansion X6
- FDCAN2 on low-speed expansion X6
- AT24C04 I2C EEPROM on low-speed expansion X6 I2C1
- AT24C04 I2C EEPROM on low-speed expansion X6 I2C2
- AT25AA010A SPI EEPROM on low-speed expansion X6 SPI2
- 96boards OV5640 mezzanine card with sensor connected to port J3.
- DH 644-100 mezzanine card with Orisetech OTM8009A DSI panel
- DH 644-100 mezzanine card with RPi 7" DSI panel
The following DTOs are supported on STM32MP13xx DHCOR DHSBC:
- joy-IT RB-TFT3.2-V2 240x320 SPI LCD and XPT2046 resistive touch controller
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://lore.kernel.org/r/20260121085347.10368-3-marex@nabladev.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the Performance Monitoring Unit (PMU) node with the appropriate
compatible string and interrupt line so that perf and other
PMU-based tooling can function correctly on this SoC.
[root@SAMA7D65 ~]$ dmesg | grep -i pmu
[ 1.487869] hw-perfevents: enabled with armv7_cortex_a7 PMU driver, 5 (8000000f) counters available
[root@SAMA7D65 ~]$ perf list hw
List of pre-defined events (to be used in -e or -M):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20260324070927.1496-2-mihai.sain@microchip.com
[claudiu.beznea: keep nodes alphanumerically sorted]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
According to nxp,pca953x.yaml, the pattern for the led names should be:
"^led-[0-9a-z]+$".
Change it accordingly to fix the following dt-schema warning"
leddimmer@62 (nxp,pca9533): 'led1', 'led2', 'led3', 'led4' do not match any
of the regexes: '^led-[0-9a-z]+$', '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260311135604.21634-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to rockchip-dwmac.yaml, the mdio node should be 'mdio0' and
'wakeup-source' is not a valid property.
Change it accordingly.
This fixes the following dt-schema warning:
Unevaluated properties are not allowed ('mdio0', 'wakeup-source'\
were unexpected)
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260303193855.828892-3-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Node names should be generic, so use 'rtc'.
Remove 'clock-frequency' as is not a valid property.
This fixes the following dt-schema warnings:
'hym8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
Unevaluated properties are not allowed ('clock-frequency' was unexpected)
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260303193855.828892-2-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
'rotation-matrix' is not a valid property.
Use the documented 'mount-matrix' property instead.
This fixes the following dt-schema warning:
accelerometer@29 (st,lis3de): 'rotation-matrix' does not match any of the
regexes: '^pinctrl-[0-9]+$'
accelerometer@29 (st,lis3de): rotation-matrix:
b'1\x000\x000\x000\x00-1\x000\x000\x000\x001\x00' is not of type 'object',
'integer', 'array', 'boolean', 'null'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260226145916.2729492-1-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
