This commit removes an unnecessary NULL check in the
`dcn10_set_input_transfer_func` function in the `dcn10_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1839 dcn10_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes a redundant NULL check in the
`dce110_set_input_transfer_func` function in the `dce110_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dce110/dce110_hwseq.c:301 dce110_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building with clang 19 or newer (which strengthened some of the
enum conversion warnings for C), there is a warning (or error with
CONFIG_WERROR=y) around doing arithmetic with an enumerated type and a
floating point expression.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:181:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
181 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
This conversion is expected due to the nature of the enumerated value
and definition, so silence the warning by casting the enumeration to an
integer explicitly to make it clear to the compiler.
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Panel replay was enabled by default in commit 5950efe25e
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25e ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This 8.4 inch panel is integrated in the Ayaneo Kun handheld
device. The panel resolution is 2560×1600, i.e. it has
portrait dimensions.
Decoding the EDID shows:
Manufacturer: MSF
Model: 4099
Display Product Name: 'TV080WUM-NL0 '
Judging from the product name this might be a clone of a
BOE panel, but with larger dimensions.
Panel frequently shows non-functional backlight control. Adding
some debug prints to update_connector_ext_caps() shows that
something the OLED bit of ext_caps is set, and then the driver
assumes that backlight is controlled via AUX.
Forcing backlight control to PWM via amdgpu.backlight=0 restores
backlight operation.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains because some lines are indented more than they should
be. I went a bit crazy re-indenting this. ;)
The comments were not useful except as a marker of things which are left
to implement so I deleted most of them except for the TODO.
I introduced a "data" pointer so that I could replace
"scl_data->dscl_prog_data." with just "data->" and shorten the lines a
bit. It's more readable without the line breaks.
I also tried to align it so you can see what is changing on each line.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Disable seamless boot on 128b/132b encoding
- Have cursor and surface updates together
- Change ASSR disable sequence to avoid corruption
- Fix few IPS problems
- Enable Replay for DCN315
- Fix few ODM problems
- Fix FEC_READY write timing
- Fix few FPO problems
- Adjust DML21 gpuvm_enable assignment
- Fix divide by 0 error in VM environment
- Fix few DCN35 problems
- Fix flickering on DCN321
- Fix mst resume problem
- Fix multi-disp FAMS problem
- Refactor Replay
- Update some of the dcn303 parameters
- Enable legacy fast update for dcn301
- Add VCO parameter for DCN31 FPU
- Fix problems reported by Coverity
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD interrupt cannot be handled in IPS2 state.
So if there's a display topology change while system in IPS2
it can be missed.
[How]
Implement worker to check each 5 sec in IPS for HPD.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can hang in IPS2 checking DMCUB_SCRATCH0 for link detection state.
[How]
Replace the HW access with a check on the shared state bit. This will
work the same way as the SCRATCH0 but won't require a wake in the case
where link detection isn't required.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For FPO + Vactive scenarios we must check that all non-FPO pipes
have VACTIVE margin to allow it. The previous check only confirmed
that there is at least one pipe that has vactive margin, but this
is incorrect as the vactive display could be using two pipes (MPO)
where the desktop plane has vactive margin, and the video plane
does not.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Today for MED update type we do not call update clocks. However, for FPO
the assumption is that update clocks should be called to disable P-State
switch before any HW programming since FPO in FW and driver are not
synchronized. This causes an issue where on a MED update, an FPO P-State
switch could be taking place, then driver forces P-State disallow in the below
code and prevents FPO from completing the sequence. In this case we add a check
to avoid re-programming (and thus re-setting) the P-State force register by
only reprogramming if the pipe was not previously Subvp or FPO. The assumption
is that the P-State force register should be programmed correctly the first
time SubVP / FPO was enabled, so there's no need to update / reset it if the
pipe config has never exited SubVP / FPO.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FIFO error can occur if we don't trigger a DISPCLK change after
touching K1/K2 dividers. For 4k144 eDP + hotplug of USB-C DP display
we see FIFO underflow.
[How]
We have the path to trigger the resync as the workaround in
DCN314/DCN32, it just needs to be ported over to DCN35.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DSC slice must be divisible by ODM slice count.
[how]
If DSC slice count is not a multiple of ODM slice count, increase DSC
slice until it is. Otherwise fail to compute DSC configuration.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Like commit ec5fa9fcde ("drm/amd/display: Adjust the MST resume flow"), we
want to avoid handling mst topology changes before restoring the old state.
If we enable DP_UP_REQ_EN before calling drm_atomic_helper_resume(), have
changce to handle CSN event first and fire hotplug event before restoring the
cached state.
[How]
Disable mst branch sending up request event before we restoring the cached state.
DP_UP_REQ_EN will be set later when we call drm_dp_mst_topology_mgr_resume().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
In multi-monitor cases the VBLANK stretch that is required to align both
monitors may be so large that it may create issues for gaming performance.
Use debug value to restrict in-game FAMS support for multi-disp use case.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some IGT tests fail with the new atomic cursor updates
when running on older DCE-based ASICs. To work around
these issues keep calling the amdgpu_dm_commit_cursors
for each cursor update on DCE, even if those cursor
updates coincide with other plane updates.
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cursors are always programmed independently of updates on other
planes. When atomic commits program cursor and surface updates
together the cursor update might be locked out by the surface
update and not take effect.
To combat this program cursor and surface updates together via
dc_update_planes_and_stream to ensure they can be applied
atomically.
When cursor updates come on their own use the old method
to program the cursor as dc_update_planes_and_stream isn't
handling this case correctly (yet), leading to a flickering
screen.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2186
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
VBios & Driver may have differnet pixel rate div policy.
If the policy is not same and fast boot is enabled,
it would cause the pixel rate is too high
after driver only performs stream blank & unblank.
[how]
We would keep pixel rate div setting by VBios until next mode set.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
