Pull SoC defconfig updates from Arnd Bergmann:
"As usual, we enable a number of additional device drivers as loadable
modules, to support the added platforms. The largest change this time
is for OMAP2/3, which were not that well supported in the generic
arm32 defconfig.
The Tegra SoC platforms are now enabled by default in Kconfig when
ARCH_TEGRA is enabled, which means the defconfig change is done at the
same time as the Kconfig change here"
* tag 'soc-defconfig-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arch/arm: Drop CONFIG_FIRMWARE_EDID from defconfig files
arm64: defconfig: Enable DP83TG720 PHY driver
arm64: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
ARM: tegra: defconfig: Drop redundant ARCH_TEGRA_foo_SOC
arm64: defconfig: enable pci-pwrctrl-generic as module
arm64: defconfig: Enable Lontium LT8713sx driver
arm64: defconfig: Enable Qualcomm Eliza SoC display clock controller
arm64: defconfig: enable IPQ5210 RDP504 base configs
arm64: defconfig: Enable Milos LPASS LPI pinctrl driver
arm64: defconfig: Enable Kaanapali clock controllers
arm64: defconfig: Enable configs for Arduino VENTUNO Q
arm64: defconfig: Enable Qualcomm Eliza basic resource providers
arm64: defconfig: Enable S5KJN1 camera sensor
arm64: defconfig: Enable configurations for Toradex Aquila AM69
arm64: defconfig: remove SENSORS_SA67MCU
arm64: defconfig: Enable Qualcomm WCD937x headphone codec as module
arm64: defconfig: Enable QCOMTEE module for QTEE-enabled Qualcomm SoCs
ARM: shmobile: defconfig: Refresh for v7.0-rc1
arm: multi_v7_defconfig: Enable more OMAP 3/4 related configs
ARM: multi_v7_defconfig: omap2plus_defconfig: Enable ITE IT66121 driver
...
Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used. Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.
It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the ARM optimized single-block AES en/decryption code into
lib/crypto/, wire it up to the AES library API, and remove the
superseded "aes-arm" crypto_cipher algorithm.
The result is that both the AES library and crypto_cipher APIs are now
optimized for ARM, whereas previously only crypto_cipher was (and the
optimizations weren't enabled by default, which this fixes as well).
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
Commit d6ace46c82 ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82 ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, more drivers get enabled in the defconfigs, to support newly
added hardware drivers.
There is one change for Tegra that modifies the Kconfig file at the
same time, and the NXP arm32 defconfigs get a refresh"
* tag 'soc-defconfig-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm: multi_v7_defconfig: Enable TPS65219 regulator
arm: omap2plus_defconfig: Enable TPS65219 regulator
arm64: defconfig: Enable Tegra241 and Tegra264
riscv: defconfig: spacemit: enable sdhci driver for K1 SoC
riscv: defconfig: Enable PWM support for SpacemiT K1 SoC
riscv: defconfig: Remove CONFIG_SND_SOC_STARFIVE=m
arm64: defconfig: Enable Tegra HSP and BPMP
ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503
ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
ARM: imx_v6_v7_defconfig: cleanup with savedefconfig
ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm
ARM: mxs_defconfig: Cleanup mxs_defconfig
arm64: defconfig: enable further Rockchip platform drivers
arm64: defconfig: enable Samsung PMIC over ACPM
arm64: defconfig: enable Maxim max77759 driver
ARM: configs: sama5_defconfig: Select CONFIG_WILC1000_SDIO
ARM: shmobile: defconfig: Refresh for v6.16-rc2
arm64: defconfig: Enable RZ/V2H(P) USB2 PHY controller reset driver
arm64: defconfig: add S32G RTC module support
arm64: defconfig: Drop unneeded unselectable sound drivers
...
Instead of exposing the arm-optimized SHA-1 code via arm-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be arm-optimized, and it fixes the longstanding issue where
the arm-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
To match sha1_blocks(), change the type of the nblocks parameter of the
assembly functions from int to size_t. The assembly functions actually
already treated it as size_t.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The DCCP socket family has now been removed from this tree, see:
8bb3212be4 ("Merge branch 'net-retire-dccp-socket'")
Remove connection tracking and NAT support for this protocol, this
should not pose a problem because no DCCP traffic is expected to be seen
on the wire.
As for the code for matching on dccp header for iptables and nftables,
mark it as deprecated and keep it in place. Ruleset restoration is an
atomic operation. Without dccp matching support, an astray match on dccp
could break this operation leaving your computer with no policy in
place, so let's follow a more conservative approach for matches.
Add CONFIG_NFT_EXTHDR_DCCP which is set to 'n' by default to deprecate
dccp extension support. Similarly, label CONFIG_NETFILTER_XT_MATCH_DCCP
as deprecated too and also set it to 'n' by default.
Code to match on DCCP protocol from ebtables also remains in place, this
is just a few checks on IPPROTO_DCCP from _check() path which is
exercised when ruleset is loaded. There is another use of IPPROTO_DCCP
from the _check() path in the iptables multiport match. Another check
for IPPROTO_DCCP from the packet in the reject target is also removed.
So let's schedule removal of the dccp matching for a second stage, this
should not interfer with the dccp retirement since this is only matching
on the dccp header.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of exposing the arm-optimized SHA-512 code via arm-specific
crypto_shash algorithms, instead just implement the sha512_blocks()
library function. This is much simpler, it makes the SHA-512 (and
SHA-384) library functions be arm-optimized, and it fixes the
longstanding issue where the arm-optimized SHA-512 code was disabled by
default. SHA-512 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
To match sha512_blocks(), change the type of the nblocks parameter of
the assembly functions from int to size_t. The assembly functions
actually already treated it as size_t.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull ARM SoC updates from Arnd Bergmann:
"The main update in size is the removal of the TI DaVinci DA830 SoC
support. DA830 is similar to DA850, which remain supported, but only
the reference board was ever supported, and we removed that one 3
years ago as it had never been converted to devicetree.
There are some other cleanups for OMAP4 and a few boards using old
GPIO interfaces"
* tag 'soc-arm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: s3c: stop including gpio.h
ARM: dts: davinci: da850-evm: Increase fifo threshold
ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY
ARM: broadcom: MAINTAINERS: Cover bcm2712 files
bus: ti-sysc: PRUSS OCP configuration
ARM: davinci: remove support for da830
ARM: omap: pmic-cpcap: do not mess around without CPCAP or OMAP4
ARM: omap2plus_defconfig: enable I2C devices of GTA04
ARM: s3c/gpio: use new line value setter callbacks
ARM: scoop/gpio: use new line value setter callbacks
ARM: sa1100/gpio: use new line value setter callbacks
ARM: orion/gpio: use new line value setter callbacks
OMAP SoC updates for v6.16
* tag 'omap-for-v6.16/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY
bus: ti-sysc: PRUSS OCP configuration
ARM: omap: pmic-cpcap: do not mess around without CPCAP or OMAP4
ARM: omap2plus_defconfig: enable I2C devices of GTA04
Link: https://lore.kernel.org/r/7ha57jrtkl.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
To merge the scalar, NEON, and CE code all into one module cleanly, add
!CPU_V7M as a direct dependency of the CE code. Previously, !CPU_V7M
was only a direct dependency of the scalar and NEON code. The result is
still the same because CPU_V7M implies !KERNEL_MODE_NEON, so !CPU_V7M
was already an indirect dependency of the CE code.
To match sha256_blocks_arch(), change the type of the nblocks parameter
of the assembly functions from int to size_t. The assembly functions
actually already treated it as size_t.
While renaming the assembly files, also fix the naming quirk where
"sha2" meant sha256. (SHA-512 is also part of SHA-2.)
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull SoC defconfig updates from Arnd Bergmann:
"A small set of updates for the arm64 defconfig to enable more drivers,
plus a bit for housekeeping on some of the arm32 defconfigs on
particular SoC families"
* tag 'soc-defconfig-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm: defconfig: drop RT_GROUP_SCHED=y from bcm2835/tegra/omap2plus
arm64: defconfig: Enable USB retimer and redriver
arm64: defconfig: Build NSS Clock Controller driver for IPQ9574
arm64: defconfig: Enable SPI NAND flashes
arm64: defconfig: Enable Synopsys HDMI receiver
arm64: defconfig: Enable Rockchip UFS host driver
arm64: defconfig: enable Qualcomm IRIS & VIDEOCC_8550 as module
arm64: defconfig: Enable HSR protocol driver
arm64: defconfig: Enable gb_beagleplay
arm64: defconfig: enable DRM_DISPLAY_CONNECTOR as a module
arm64: defconfig: Enable Qualcomm QCM2290 GPU clock controller
ARM: shmobile: defconfig: Supplement DTB with ATAG information
Commit 673ce00c5d ("ARM: omap2plus_defconfig: Add support for distros
with systemd") said it's because of recommendation from systemd. But
systemd changed their recommendation later.[1]
For cgroup v1, if turned on, and there's any cgroup in the "cpu" hierarchy it
needs an RT budget assigned, otherwise the processes in it will not be able to
get RT at all. The problem with RT group scheduling is that it requires the
budget assigned but there's no way we could assign a default budget, since the
values to assign are both upper and lower time limits, are absolute, and need to
be sum up to < 1 for each individal cgroup. That means we cannot really come up
with values that would work by default in the general case.[2]
For cgroup v2, it's almost unusable as well. If it turned on, the cpu controller
can only be enabled when all RT processes are in the root cgroup. But it will
lose the benefits of cgroup v2 if all RT process were placed in the same cgroup.
Red Hat, Gentoo, Arch Linux and Debian all disable it. systemd also doesn't
support it.
[1]: f4e74be185
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1229700
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
Drop CONFIG_NF_LOG_NETDEV as it was removed in commit 1510618e45
("netfilter: nf_log_netdev: merge with nf_log_syslog").
Drop CONFIG_NFT_COUNTER as it was removed in commit 023223dfbf
("netfilter: nf_tables: make counter support built-in").
Drop CONFIG_NF_FLOW_TABLE_IPV6 and CONFIG_NF_FLOW_TABLE_IPV4 as they were
removed in commit c42ba4290b ("netfilter: flowtable: remove ipv4/ipv6
modules").
Drop CONFIG_NF_LOG_BRIDGE as it was removed in commit 77ccee96a6
("netfilter: nf_log_bridge: merge with nf_log_syslog").
Drop CONFIG_IP_NF_TARGET_CLUSTERIP from any remaining arm defconfigs as it
was removed in commit 9db5d918e2 ("netfilter: ip_tables: remove clusterip
target").
Drop CONFIG_USB_MUSB_AM35X as it was removed in commit 57f8e00d8a ("usb:
musb: Drop old unused am35x glue layer").
Drop CONFIG_NFT_OBJREF as it was removed in commit d037abc241
("netfilter: nft_objref: make it builtin").
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/r/20230919125112.15515-2-twoerner@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ir-rx51 is a pwm-based TX driver specific to the N900. This can be
handled entirely by the generic pwm-ir-tx driver, and in fact the
pwm-ir-tx driver has been compatible with ir-rx51 from the start.
Note that the suspend code in the ir-rx51 driver is unnecessary, since
during transmit, the process is not in interruptable sleep. The process
is not put to sleep until the transmit completes.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit a2225d931f ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As discussed at LSF/MM [1] [2] and with no objections raised there,
deprecate the SLAB allocator. Rename the user-visible option so that
users with CONFIG_SLAB=y get a new prompt with explanation during make
oldconfig, while make olddefconfig will just switch to SLUB.
In all defconfigs with CONFIG_SLAB=y remove the line so those also
switch to SLUB. Regressions due to the switch should be reported to
linux-mm and slab maintainers.
[1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/
[2] https://lwn.net/Articles/932201/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Helge Deller <deller@gmx.de> # parisc
PTP support is now enabled by default for configurations with
ethernet support, so drop the redundant entries in defconfig
files.
Fixes: e5f3155267 ("ethernet: fix PTP_1588_CLOCK dependencies")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mutually exclusive with the new 8250_OMAP
driver, so 'make defconfig' turns it off already. Drop
the reference now.
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Fixes: f98d45145e ("ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit a96d2ba2d8 ("ASoC: codecs: tlv320aic3x: move I2C to separated
file") split the driver into SPI and I2C code and also provided a
separate configuration option for it.
The RX51 audio fails to probe since this commit, so let's add this
non-obvious configuration option to the defconfig.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Message-Id: <20211216150506.31163-1-merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Nokia N900 has an LP5523 driving the RGB LED and the 6 keyboard LEDS.
Enable support for it in omap2plus_defconfig.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Nokia N900 uses a TI WL1251 chip for WiFi. Enable support for it
as a loadable module.
In order to be usable and connect to networks, it needs wireless
extensions, so enable WEXT support in the kernel.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Torpedo development kit has an at25 SPI EEPROM on the baseboard.
Enable it as a module in the omap2plus defconfig.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the majority of the Netfilter components as loadable modules
in the omap2plus_defconfig file.
Signed-off-by: Ivan Jelincic <parazyd@dyne.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: parazyd <parazyd@dyne.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
