Analog connectors may be hot-plugged unlike other connector
types that don't support HPD.
Stop DRM from polling other connector types that don't
support HPD, such as eDP, LVDS, etc. These were wrongly
polled when analog connector support was added,
causing issues with the seamless boot process.
Fixes: c4f3f114e7 ("drm/amd/display: Poll analog connectors (v3)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To improve reliability of the system in the case of infrequent or
potentially recoverable hangs when the DMU times out.
[How]
Attempt to recover the ASIC when DMU hangs by triggering a crash
recovery callback for the DM to forward to the base driver.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The AMD VSDB contains two bits that indicate the type of panel connected.
This can be useful for policy decisions based upon panel technology.
[How]
Read the bits for the panel type when parsing VSDB and store them in
the dc_link.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
On amdgpu_dm_connector_destroy(), the driver attempts to cancel pending
HDMI HPD work without checking if the HDMI HPD is enabled.
Added a check that it is enabled before clearing it.
Fixes: 6a681cd903 ("drm/amd/display: Add an hdmi_hpd_debounce_delay_ms module")
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Right now, the HDMI HPD filter is enabled by default at 1500ms.
We want to disable it by default, as most modern displays with HDMI do
not require it for DPMS mode.
The HPD can instead be enabled as a driver parameter with a custom delay
value in ms (up to 5000ms).
Fixes: c918e75e1e ("drm/amd/display: Add an HPD filter for HDMI")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4859
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).
This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.
This path shows the problem (when the values are out of sync):
amdgpu_dm_atomic_commit_tail()
-> amdgpu_dm_commit_streams()
-> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.
Fixes: 2fe87f54ab ("drm/amd/display: Set default brightness according to ACPI")
Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function drm_property_replace_blob_from_id() allows checking whether
the blob size is equal to a predefined value. In case of variable-size
properties (like the gamma / degamma LUTs) we might want to check for
the blob size against the maximum, allowing properties of the size
lesser than the max supported by the hardware. Extend the function in
order to support such checks.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-2-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Device pointer sources used:
- connector->dev - when a DRM connector was available
- old_plane_crtc->dev / new_plane_crtc->dev - for plane state functions
- pass in drm_device - for the stream scaling function
- aconnector->base.dev - for the VSDB parsing function
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_DEBUG_ class of macros are depricated. Recommended drm_dbg_kms() has
the advantage of being able to distinguish the logs from devices in a
multi-gpu environment.
Where a pointer to struct amdgpu_device is available, use that to get
the drm device.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IGT CRC tests fail on replay panels due to invalid CRC values
captured when replay is active.
[How]
- Disable replay when CRC source is enabled; set flag to
prevent unexpected re-enable
- Reset flag when CRC source is disabled to allow replay
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The PSR message was moved in commit 4321742c39 ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c39 ("drm/amd/display: Move PSR support message into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Panel Replay is not an eDP-specific function.
[HOW]
Create new Panel Replay source files and move the Panel Replay
functions from the eDP files to the new files. Additionally, create
a new link_service construct function to assign the related
function pointers.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm_*() macros include the device which is helpful for debugging
issues in multi-GPU systems.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Newer ASICs have different PSP footer sizes which lead to driver
failing to locate the DMCUB FW meta info, which in turn causes
improper DMCUB FW loading and causes DMCUB to crash.
Add support for custom PSP footer sizes and check 512B by default
as well.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
This adds support for a multiplier. This multiplier is
programmed via the HDR Multiplier in DCN.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-multiply_125
kms_colorop --run plane-XR30-XR30-multiply_inv_125
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 3x4 CTM
3. Multiplier
4. 1D curve colorop
5. 1D LUT
6. 1D curve colorop
7. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-42-alex.hung@amd.com
This adds support for a 3x4 color transformation matrix.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-ctm_3x4_50_desat
kms_colorop --run plane-XR30-XR30-ctm_3x4_overdrive
kms_colorop --run plane-XR30-XR30-ctm_3x4_oversaturate
kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_enc
kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_dec
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 3x4 CTM
3. 1D curve colorop
4. 1D LUT
5. 1D curve colorop
6. 1D LUT
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-40-alex.hung@amd.com
This patch adds colorops for custom 1D LUTs in the SHAPER and
BLND HW blocks.
With this change the following IGT tests pass:
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut-srgb_eotf_lut
The color pipeline now consists of the following colorops:
1. 1D curve colorop
2. 1D curve colorop
3. 1D LUT
4. 1D curve colorop
5. 1D LUT
The 1D curve colorops support sRGB, BT2020, and PQ scaled to 125.0.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-39-alex.hung@amd.com
This patchset enables support for the PQ_125 EOTF and its inverse
on all existing plane 1D curve colorops, i.e., on DEGAM, SHAPER,
and BLND blocks.
With this patchset the following IGT subtests are passing:
kms_colorop --run plane-XR30-XR30-pq_125_eotf
kms_colorop --run plane-XR30-XR30-pq_125_inv_eotf
kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf
kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf-pq_125_eotf
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-33-alex.hung@amd.com
Expose a 3rd 1D curve colorop, with support for
DRM_COLOROP_1D_CURVE_SRGB_EOTF and program the BLND block
to perform the sRGB transform when the colorop is not in
bypass
With this change the following IGT test passes:
kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf-srgb_eotf
The color pipeline now consists of the following colorops:
1. 1D curve colorop w/ sRGB EOTF support
2. 1D curve colorop w/ sRGB Inverse EOTF support
3. 1D curve colorop w/ sRGB EOTF support
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-31-alex.hung@amd.com
Expose a 2nd curve colorop with support for
DRM_COLOROP_1D_CURVE_SRGB_INV_EOTF and program HW to
perform the sRGB Inverse EOTF on the shaper block
when the colorop is not in bypass.
With this change the follow IGT tests pass:
kms_colorop --run plane-XR30-XR30-srgb_inv_eotf
kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf
The color pipeline now consists of the following colorops:
1. 1D curve colorop w/ sRGB EOTF support
2. 1D curve colorop w/ sRGB Inverse EOTF support
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-30-alex.hung@amd.com
The function dereferences amdgpu_dm_connector->dc_link early to
initialize verified_link_cap and dc, but later still checks
amdgpu_dm_connector->dc_link for NULL in the analog path.
This late NULL check is redundant, introduce a local dc_link pointer,
use it consistently, and drop the superfluous NULL check while using
dc_link->link_id.id instead.
The function uses dc_link at the very beginning without checking if it
is NULL. But later in the code, it suddenly checks if dc_link is NULL.
This check is too late to be useful, because the code has already used
dc_link earlier. So this NULL check does nothing.
We simplify the code by storing amdgpu_dm_connector->dc_link in a local
dc_link variable and using it throughout the function. Since dc_link is
already dereferenced early, the later NULL check is unnecessary and is
removed.
Fixes the below:
amdgpu_dm_connector_get_modes():
variable dereferenced before check 'amdgpu_dm_connector->dc_link'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c
8845 &amdgpu_dm_connector->dc_link->verified_link_cap;
8846 const struct dc *dc = amdgpu_dm_connector->dc_link->dc;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Dereference
...
8856
8857 if (amdgpu_dm_connector->dc_sink &&
8858 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Checked too late.
Presumably this NULL check could be removed?
...
Fixes: d46e422f65 ("drm/amd/display: Cleanup uses of the analog flag")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
