The interface was used in a confusing way. In profile mode scenario,
the 2nd parameter of the interface was used in a different way from
other scenarios.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable fw ctf, apcc dfll and gfx ss on navi10.
fw ctf: when the fw ctf is triggered, the gfx and soc power domain
are shut down. fan speed is boosted to the maximum.
gfx ss: hardware feature, sanity check has been done.
apcc dfll: can check the scoreboard in smu fw to confirm if it's enabled.
no need to do further check since the gfx hardware control the frequency once
a pcc signal comes.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the unforce_dpm_levels doesn't need to check feature enablement.
because the smu_get_dpm_freq_range function has check feature logic.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when we set profile_peak to sysfs:power_dpm_force_performance_level,
we gets the wrong socclk level and mclk level.this patch fix this issue.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the hwmon interface need temperature sensor type support.
1. SENSOR_HOTSPOT_TEMP
2. SENSOR_EDGE_TEMP(SENSOR_GPU_TEMP)
3. SENSOR_MEM_TEMP
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if not check dpm feature is enabled, it will cause show smc send message
failed log in dmesg log.
eg:
echo "auto" > power_dpm_force_performance_level
v2: whitespace fix (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the navi asic can't get current rpm by MSG_GetCurrentRpm,
it will cause show fan rpm error, use Metrics_t to replace it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It would hit SMU fw bug without BACO enablement when audio
driver put audio device to D3 state. Before the bug in SMU fw
get fixed, enable BACO feature as WAR.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the uclk dpm feature is not work well on all navi10 asic,
use pp feature mask module parameter to control it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU FW has bug that it would cause hung when both fw dstate and
gfxoff are enabled at the same time.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is hw workaround to wake up azalia from d3. display asic
and azalia are two different pci devices. while display asic
wake from d3, current hw does not send signal to azalia.
workaround: display driver ask smu send message to azalia device
to let azalia wake up.
Defintion of SMU message, like PPSMC_MSG_BacroAudioD3PME, is per
asic. It is shared by different OS.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the SmuMetrics_t table is asic related data structure.
so move vega20_ppt file to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
on navi10, by default the below four features are enabled.
gfxclk deep sleep: enabled and verified
fw dstate: enabled and then soc ulv is verified
dcefclk deep sleep: enabled and verified. notice that on different boards,
due to the minimum dcefclk deep sleep setting in VBIOS, we may not see dcefclk
deep sleep kicking in.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
due to the smu dma/RTOS restriction, the interval of catching smu
metric table should be more than 1ms. otherwise it will cause the gpu
activity data corruption.
Signed-off-by:Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this callback function is only call in read_sensor in smu_v11_0.c,
so move this code to {asic}_ppt.c to implement as asic related function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this callback function is only call in read_sensor in smu_v11_0.c,
so move this code to {asic}_ppt.c to implement as asic related function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the interface smu_v11_0_get_current_clk_freq should be return 10Khz not
Mhz unit to adapt vega20 and navi10 asic at the same time.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add callback function get[set]_power_profile_mode for navi10 asic
v2: fix smu_update_table for rebase (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
