An earlier change moved the hwstamp queue check into a helper
function with an unlikely(). However, it makes more sense for
the caller to decide if it's likely() or unlikely(), so make
the change to support that.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To help make sure we're only accessing things we really need
to access we can cut down on the q->lif->netdev references by
using q->dev which is already in cache.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there is a lot of transmit traffic the driver can get into a
situation that the device is starved due to the doorbell never
being rung. This can happen if xmit_more is set constantly
and __netdev_tx_sent_queue() keeps returning false. Fix this
by checking if the queue needs to be stopped right before
calling __netdev_tx_sent_queue(). Use MAX_SKB_FRAGS + 1 as the
stop condition because that's the maximum number of frags
supported for non-TSO transmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver currently calls netdev_tx_completed_queue() for every
Tx completion. However, this API is only meant to be called once
per NAPI if any Tx work is done. Make the necessary changes to
support calling netdev_tx_completed_queue() only once per NAPI.
Also, use the __netdev_tx_sent_queue() API, which supports the
xmit_more functionality.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of napi_consume_skb so that skb recycling
can happen by way of the napi_skb_cache.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perf was showing some hot spots in ionic_tx_descs_needed()
for TSO traffic. Rework the function to return sooner where
possible.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the driver attempts to wake the Tx queue
for every descriptor processed. However, this is
overkill and can cause thrashing since Tx xmit can be
running concurrently on a different CPU than Tx clean.
Fix this by refactoring Tx cq servicing into its own
function so the Tx wake code can run after processing
all Tx descriptors.
The driver isn't using the expected memory barriers
to make sure the stop/start bits are coherent. Fix
this by making sure to use the correct memory barriers.
Also, the driver is using the wake API during Tx
xmit even though it's already scheduled. Fix this by
using the start API during Tx xmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The XDP_REDIRECT packets are given to the XDP stack and
we drop the use of the related page: it will get freed
by the driver that ends up doing the Tx. Because we have
some hardware configurations with limited queue resources,
we use the existing datapath Tx queues rather than creating
and managing a separate set of xdp_tx queues.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an xdp program is loaded, add headroom at the beginning
of the frame to allow for editing and insertions that an XDP
program might need room for, and tailroom used later for XDP
frame tracking. These are only needed in the first Rx buffer
in a packet, not for any trailing frags.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the basics for running Rx packets through XDP programs.
Add new queue setup and teardown steps for adding/removing an
XDP program, and add the call to run the XDP on a packet.
The XDP frame size needs to be the MTU plus standard ethernet
header, plus head room for XDP scribblings and tail room for a
struct skb_shared_info. Also, at this point, we don't support
XDP frags, only a single contiguous Rx buffer. This means
that our page splitting is not very useful, so when XDP is in
use we need to use the full Rx buffer size and not do sharing.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These helpers clean up some of the code around DMA mapping
and other buffer references, and will be used in the next
few patches for the XDP support.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the checks are:
[1] unlikely(q->features & IONIC_TXQ_F_HWSTAMP)
[2] !unlikely(q->features & IONIC_TXQ_F_HWSTAMP)
[1] is clear enough, but [2] isn't exactly obvious to the
reader because !unlikely reads as likely. However, that's
not what this means.
[2] means that it's unlikely that the q has
IONIC_TXQ_F_HWSTAMP enabled.
Write an inline helper function to hide the unlikely
optimization to make these checks more readable.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20231204210936.16587-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some cases where an skb carries more frags than the
number of SGs that ionic can support per descriptor - this
forces the driver to linearize the skb. However, if this
is a TSO packet that is going to become multiple descriptors
(one per MTU-sized packet) and spread the frags across them,
this time-consuming linearization is likely not necessary.
We scan the frag list and count up the number of SGs that
would be created for each descriptor that would be generated,
and only linearize if we hit the SG limit on a descriptor.
In most cases, we won't even get to the frag list scan, so
this doesn't affect typical traffic.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ionic device supports a maximum buffer length of 16 bits (see
ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to
the receive rings, the function ionic_rx_fill() uses 16bit math when
calculating the number of pages to allocate for an RX descriptor,
given the interface's MTU setting. If the system PAGE_SIZE >= 64KB,
and the buf_info->page_offset is 0, the remain_len value will never
decrement from the original MTU value and the frag_len value will
always be 0, causing additional pages to be allocated as scatter-
gather elements unnecessarily.
A similar math issue exists in ionic_rx_frags(), but no failures
have been observed here since a 64KB page should not normally
require any scatter-gather elements at any legal Ethernet MTU size.
Fixes: 4b0a7539a3 ("ionic: implement Rx page reuse")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ionic device has on-board memory (CMB) that can be used
for descriptors as a way to speed descriptor access for faster
packet processing. It is rumored to improve latency and/or
packets-per-second for some profiles of small packet traffic,
although your mileage may vary.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In one version of the HW there is a remote possibility that it
will miss the doorbell ring. This adds a bit of protection to
be sure we don't stall a queue from a missed doorbell.
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same pre-work code is used before each call to
ionic_rx_fill(), so bring it in and make it a part of
the routine.
Signed-off-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support stateless offloads for GRE, VXLAN, GENEVE, IPXIP4
and IPXIP6 when the FW supports them.
Signed-off-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.
Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up some checkpatch complaints that have crept in:
doubled words words, mispellled words, doubled lines.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Buffer DMA mapping happens in ionic_tx_map_skb() and this function is
called from ionic_tx() and ionic_tx_tso(). If ionic_tx_map_skb()
succeeds, but a failure is encountered later in ionic_tx() or
ionic_tx_tso() we aren't unmapping the buffers. This can be fixed in
ionic_tx() by changing functions it calls to return void because they
always return 0. For ionic_tx_tso(), there's an actual possibility that
we leave the buffers mapped, so fix this by introducing the helper
function ionic_tx_desc_unmap_bufs(). This function is also re-used
in ionic_tx_clean().
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
These debug stats are not really useful, their collection is
likely detrimental to performance, and they suck up a lot
of memory which never gets used if no one ever enables the
priv-flag to print them, so just remove these bits.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be sure to count the csum_none cases when csum offload is
enabled.
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to count the correct Tx and/or Rx packets for dynamic
interrupt moderation, depending on which we're processing on
the queue interrupt.
Fixes: 04a834592b ("ionic: dynamic interrupt moderation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the interrupt coalesce value update out of the napi
thread and into the dim_work thread and set it only when it
has actually changed.
Fixes: 04a834592b ("ionic: dynamic interrupt moderation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the SKBTX_IN_PROGRESS when offloading the Tx timestamp.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure the device is in a Tx offload mode before calling the
hwstamp offload xmit.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Tx and Rx timestamped packets are handled through separate
queues. Here we set them up, service them, and tear them down
along with the normal Tx and Rx queues.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparating for hardware timestamping, we need to support
large Tx and Rx completion descriptors. Here we add the new
queue feature ids and handling for the completion descriptor
sizes.
We only are adding support for the Rx 2x sized completion
descriptors in the general Rx queues for now as we will be
using it for PTP Rx support, and we don't have an immediate
use for the large descriptors in the general Tx queues yet;
it will be used in a special Tx queues added in one of the
next few patches.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Increment our dma-error counter in a couple of spots
that were missed before.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
We were linearizing non-TSO skbs that had too many frags, but
we weren't checking number of frags on TSO skbs. This could
lead to a bad page reference when we received a TSO skb with
more frags than the Tx descriptor could support.
v2: use gso_segs rather than yet another division
don't rework the check on the nr_frags
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gather the Tx packet and byte counts and call
netdev_tx_completed_queue() only once per clean cycle.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The descriptor mappings are set up the same way whether
or not it is a TSO, so we don't need separate logic for
the two cases.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the new ionic_tx_map_tso() usable by the non-TSO paths,
and pull the call up a level into ionic_tx() before calling
the csum or no-csum routines.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
One issue with the original TSO code was that it was working too
hard to deal with skb layouts that were never going to show up,
such as an skb->data that was longer than a single descriptor's
length. The other issue was trying to arrange the fragment dma
mapping at the same time as figuring out the descriptors needed.
There was just too much going on at the same time.
Now we do the dma mapping first, which sets up the buffers with
skb->data in buf[0] and the remaining frags in buf[1..n-1].
Next we spread the bufs across the descriptors needed, where
each descriptor gets up to mss number of bytes.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make better use of our struct types and type checking by passing
the actual Rx or Tx completion type rather than a generic void
pointer type.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove an unnecessary layer over rx skb allocation.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up a couple of struct uses to make for better fast path
access.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the Rx buffer allocations to use pages twice when using
normal MTU in order to cut down on buffer allocation and mapping
overhead.
Instead of tracking individual pages, in which we may have
wasted half the space when using standard 1500 MTU, we track
buffers which use half pages, so we can use the second half
of the page rather than allocate and map a new page once the
first buffer has been used.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
