Following commit 31af04cd60 ("arm64: dts: Remove inconsistent use of
'arm,armv8' compatible string"), clean up these binding examples in case
anyone is tempted to copy them.
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
These files were converted to json-schema, but the references weren't
renamed.
Fixes: 66ed144f14 ("dt-bindings: interrupt-controller: Convert ARM GIC to json-schema")
(and other similar commits)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull IRQ chip updates from Ingo Molnar:
"A late irqchips update:
- New TI INTR/INTA set of drivers
- Rewrite of the stm32mp1-exti driver as a platform driver
- Update the IOMMU MSI mapping API to be RT friendly
- A number of cleanups and other low impact fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
arm64: arch_k3: Enable interrupt controller drivers
irqchip/ti-sci-inta: Add msi domain support
soc: ti: Add MSI domain bus support for Interrupt Aggregator
irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
irqchip/ti-sci-intr: Add support for Interrupt Router driver
dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
gpio: thunderx: Use the default parent apis for {request,release}_resources
genirq: Introduce irq_chip_{request,release}_resource_parent() apis
firmware: ti_sci: Add helper apis to manage resources
firmware: ti_sci: Add RM mapping table for am654
firmware: ti_sci: Add support for IRQ management
firmware: ti_sci: Add support for RM core ops
...
AT91 SoC for 5.2
- PM changes for SAM9X60
* tag 'at91-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: do not disable/enable PLLA for ULP modes
ARM: at91: pm: disable RC oscillator in ULP0
ARM: at91: pm: add ULP1 support for SAM9X60
ARM: at91: pm: add support for per SoC wakeup source configuration
ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs
ARM: at91: pm: initial PM support for SAM9X60
dt-bindings: arm: atmel: add binding for SAM9X60 SoC
ARM: at91: pm: introduce at91_soc_pm structure
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
Merge in a few pending fixes from pre-5.1 that didn't get sent in:
MAINTAINERS: update arch/arm/mach-davinci
ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1
ARM: dts: imx6q-logicpd: Reduce inrush current on start
ARM: dts: imx: Fix the AR803X phy-mode
ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing
arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply
ARM: sunxi: fix a leaked reference by adding missing of_node_put
ARM: sunxi: fix a leaked reference by adding missing of_node_put
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull power supply and reset updates from Sebastian Reichel:
"Core:
- Add over-current health state
- Add standard, adaptive and custom charge types
- Add new properties for start/end charge threshold
New Drivers / Hardware:
- UCS1002 Programmable USB Port Power Controller
- Ingenic JZ47xx Battery Fuel Gauge
- AXP20x USB Power: Add AXP813 support
- AT91 poweroff: Add SAM9X60 support
- OLPC battery: Add XO-1.5 and XO-1.75 support
Misc Changes:
- syscon-reboot: support mask property
- AXP288 fuel gauge: Blacklist ACEPC T8/T11. Looks like some vendor
thought it's a good idea to build a desktop system with a fuel
gauge, that slowly "discharges"...
- cpcap-battery: Fix calculation errors
- misc fixes"
* tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
power: supply: olpc_battery: force the le/be casts
power: supply: ucs1002: Fix build error without CONFIG_REGULATOR
power: supply: ucs1002: Fix wrong return value checking
power: supply: Add driver for Microchip UCS1002
dt-bindings: power: supply: Add bindings for Microchip UCS1002
power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant
power: supply: core: fix clang -Wunsequenced
power: supply: core: Add missing documentation for CHARGE_CONTROL_* properties
power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties
power: supply: core: Add Standard, Adaptive, and Custom charge types
power: supply: axp288_fuel_gauge: Add ACEPC T8 and T11 mini PCs to the blacklist
power: supply: bq27xxx_battery: Notify also about status changes
power: supply: olpc_battery: Have the framework register sysfs files for us
power: supply: olpc_battery: Add OLPC XO 1.75 support
power: supply: olpc_battery: Avoid using platform_info
power: supply: olpc_battery: Use devm_power_supply_register()
power: supply: olpc_battery: Move priv data to a struct
power: supply: olpc_battery: Use DT to get battery version
x86/platform/olpc: Use a correct version when making up a battery node
x86/platform/olpc: Trivial code move in DT fixup
...
STM32 system configuration controller registers needs to be clocked.
Document clock support on stm32-syscon.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull clk framework updates from Stephen Boyd:
"We have a couple new features and changes in the core clk framework
this time around because we've finally gotten around to fixing some
long standing issues. There's still work to do though, so this pull
request is largely laying down the foundation for all the driver
changes to come in the next merge window.
The first problem we're alleviating is how parents of clks are
specified. With the new method, we should see lots of drivers migrate
away from the current design of string comparisons on the entire clk
tree to a more direct method where they can use clk_hw pointers or
more localized names specified in DT or via clkdev. This should reduce
our reliance on string comparisons for all the topology description
logic that we've been using for years and hopefully speed some things
up while avoiding problems we have with generating clk names.
Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't
really helping anyone and we introduced big-endian versions of the
basic clk types so that we can get rid of clk_{readl,writel}(). Both
of these are things that driver developers have tried to use over the
years that I typically bat away during code reviews because they're
not useful. It's great to see these two things go away so maintainers
can save time not worrying about these things.
On the driver side we got the usual collection of new SoC support and
non-critical fixes and updates to existing code. The big topics that
stand out are the new driver support for Mediatek MT8183 and MT8516
SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The
other patches in the driver pile are mostly fixes for things that are
being used for the first time or additions for clks that couldn't be
tested before because there wasn't a consumer driver that exercised
them. Details are below and also in the sub-maintainer tags.
Core:
- Remove clk_readl() and introduce BE versions of basic clk types
- Rewrite how clk parents can be specified to allow DT/clkdev lookups
- Removal of the CLK_IS_BASIC clk flag
- Framework documentation updates and fixes
New Drivers:
- Support for STM32F769
- AT91 sam9x60 PMC support
- SiFive FU540 PRCI and PLL support
- Qualcomm QCS404 CDSP clk support
- Qualcomm QCS404 Turing clk support
- Mediatek MT8183 clock support
- Mediatek MT8516 clock support
- Milbeaut M10V clk controller support
- Support for Cirrus Logic Lochnagar clks
Updates:
- Rework AT91 sckc DT bindings
- Fix slow RC oscillator issue on sama5d3
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
- Various static analysis fixes/finds and const markings
- Video Engine (ECLK) support on Aspeed SoCs
- Xilinx ZynqMP Versal platform support
- Convert Xilinx ZynqMP driver to be struct oriented
- Fixes for Rockchip rk3328 and rk3288 SoCs
- Sub-type for Rockchip SoCs where mux and divider aren't a single register
- Remove SNVS clock from i.MX7UPL clock driver and bindings
- Improve i.MX5 clock driver for i.MX50 support
- Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU)
- Export a new clock for the MBUS controller on the A13
- Allwinner H6 fixes to support a finer clocking of the video and VPU engines
- Add g12a support in the Amlogic axg audio clock controller
- Add missing PCI USB clock on Rensas RZ/N1
- Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E
- A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h>
- VPU and Video Decoder clocks on Amlogic Meson8b
- Finally remove the wrong ABP Meson8b clock id
- Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A
- Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller
- Un-expose some Amlogic AXG-Audio input clocks IDs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits)
clk: Cache core in clk_fetch_parent_index() without names
clk: imx: correct pfdv2 gate_bit/vld_bit operations
clk: sifive: add a driver for the SiFive FU540 PRCI IP block
clk: analogbits: add Wide-Range PLL library
clk: imx: clk-pllv3: mark expected switch fall-throughs
clk: imx8mq: Add dsi_ipg_div
clk: imx: pllv4: add fractional-N pll support
clk: sunxi-ng: Use the correct style for SPDX License Identifier
clk: sprd: Use the correct style for SPDX License Identifier
clk: renesas: Use the correct style for SPDX License Identifier
clk: qcom: Use the correct style for SPDX License Identifier
clk: davinci: Use the correct style for SPDX License Identifier
clk: actions: Use the correct style for SPDX License Identifier
clk: imx: keep uart clock on during system boot
clk: imx: correct i.MX7D AV PLL num/denom offset
dt-bindings: clk: add documentation for the SiFive PRCI driver
clk: stm32mp1: Add ddrperfm clock
clk: Remove CLK_IS_BASIC clk flag
clock: milbeaut: Add Milbeaut M10V clock controller
dt-bindings: clock: milbeaut: add Milbeaut clock description
...
Pull Devicetree updates from Rob Herring:
- Fix possible memory leak in reserved-memory failure case
- Support for DMA parent bus which are not a parent node
- Clang -Wunsequenced fix
- Remove some unnecessary prints on memory alloc failures
- Various printk msg and comment fixes
- Update DT schema tools repository location
- Convert simple-framebuffer binding to DT schema
- Bindings for isl68137 and ir38064 trivial devices
- New documentation on binding do's and don't's for binding writers to
ignore
* tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
of: unittest: Remove error printing on OOM
of: irq: Remove WARN_ON() for kzalloc() failure
dt-bindings: pinctrl: fix bias-pull,up typo
dt-bindings: Update schema project location to devicetree.org github group
of: fix clang -Wunsequenced for be32_to_cpu()
of/device.c: fix the wrong comments
dt-bindings: Add isl68137 as a trivial device
dt-bindings: Add ir38064 as a trivial device
of: del redundant type conversion
dt-bindings: mfd: axp20x: Add fallback for axp805
of: Improve of_phandle_iterator_next() error message
dt-bindings: connector: Spelling mistake
dt-bindings: Add schemas for simple-framebuffer
of: address: Add support for the parent DMA bus
of: address: Retrieve a parent through a callback in __of_translate_address
dt-bindings: bus: Add binding for the Allwinner MBUS controller
dt-bindings: interconnect: Add a dma interconnect name
of: use correct function prototype for of_overlay_fdt_apply()
of: reserved_mem: fix reserve memory leak
of: property: Document that of_graph_get_endpoint_by_regs needs of_node_put
...
Following the same fashion with replicator DT binding, this patch is to
unify the DT binding for funnel to support static and dynamic modes;
finally we get the funnel DT binding as below:
Before patch:
Static funnel, aka. non-configurable funnel:
Not supported;
Dynamic funnel, aka. configurable funnel:
"arm,coresight-funnel", "arm,primecell";
After patch:
Static funnel:
"arm,coresight-static-funnel";
Dynamic funnel:
"arm,coresight-dynamic-funnel", "arm,primecell";
"arm,coresight-funnel", "arm,primecell"; (obsolete)
At the end of this patch, it gives an example for static funnel DT
binding, and updates the dynamic funnel example.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Wanglai Shi <shiwanglai@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CoreSight uses below bindings for replicator:
Dynamic replicator, aka. configurable replicator:
"arm,coresight-dynamic-replicator", "arm,primecell";
Static replicator, aka. non-configurable replicator:
"arm,coresight-replicator";
The compatible string "arm,coresight-replicator" is not an explicit
naming to express the replicator is 'static'. To unify the naming
convention, this patch introduces a new compatible string
"arm,coresight-static-replicator" for the static replicator; the
compatible string "arm,coresight-replicator" is kept for backward
compatibility, but tag it as obsolete and suggest to use the new
compatible string.
As result CoreSight replicator have below bindings:
Dynamic replicator:
"arm,coresight-dynamic-replicator", "arm,primecell";
Static replicator:
"arm,coresight-static-replicator";
"arm,coresight-replicator"; (obsolete)
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allwinner DT changes for 5.2
This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
* tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits)
ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
ARM: dtsi: axp81x: add USB power supply node
ARM: dts: sun5i: Reorder pinctrl nodes
ARM: dts: sun6i: i7: Remove useless property
ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry
ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences.
ARM: dts: sun5i: Add the MBUS controller
dt-bindings: sunxi: Add compatible for OrangePi 3 board
ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins
dt-bindings: arm: sunxi: Add Beelink GS1 board
ARM: dts: sun8i: tbs-a711: Add support for volume keys input
ARM: dts: sunxi: Add R_LRADC support for A83T
ARM: dts: sunxi: Improve A33 NAND transfers by using DMA
ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)
ARM: dts: sunxi: Remove useless pinctrl nodes
ARM: dts: sunxi: Remove pinctrl groups setting bias
ARM: dts: sunxi: Remove useless address and size cells
ARM: dts: sunxi: Conform to DT spec for NAND controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Devicetree changes for omap variants
This series of changes configures dra7 pcie x2 lane mode, configures
am43xx-epos-evm regulators and keypad wakeup source, and uses standard
reset-gpios instead of gpio-reset for n810.
We also need to split dra7 dtsi files for properly supporting dra76x
and am576 as some of the devices are different such as usb and pruss.
* tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Separate AM57 dtsi files
dt-binding: arm: omap: Add information for AM5748
ARM: dts: omap2420-n810: Use new CODEC reset pin name
ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source
ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory
ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on
ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
Signed-off-by: Olof Johansson <olof@lixom.net>
Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.
The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.
Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.
* tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma
arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.
arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller.
arm64: dts: rockchip: Add nanopi4 ethernet phy
arm64: dts: rockchip: Add PWM fan for NanoPC-T4
arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi
arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911)
arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi
arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus
arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960
arm64: dts: rockchip: Add Nanopi NEO4 initial support
arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64
arm64: dts: rockchip: Add support for the Orange Pi RK3399 board.
arm64: dts: rockchip: enable mali on rock960 boards
arm64: dts: rockchip: enable mali on Rock Pi 4
arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes
arm64: dts: rockchip: give some life to the rk3328-roc-cc leds
arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328
arm64: dts: rockchip: add ir-receiver node on rk3328-rock64
arm64: dts: rockchip: add leds node on rk3328-rock64
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Quite a bit of love for the rk3288-veyron chromeos devices and a number
of cleanups for rk3288 from that area, hdmi support for the old rk3066
a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board.
* tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808
ARM: dts: rockchip: add rk3066 hdmi nodes
ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty
dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty
ARM: dts: rockchip: Add vdd_logic to rk3288-veyron
ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry
ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288
ARM: dts: rockchip: Enable WiFi on rk3288-tinker
ARM: dts: rockchip: add grf reference in rk3288 tsadc node
ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s
ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds initial device tree bindings for the IXP4xx machines.
This time I tried something wild and crazy and try to make proper
JSON-style YAML bindings for the top level.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds the binding documentation for apmixedsys, audiosys,
camsys, imgsys, infracfg, mcucfg, mfgcfg, mmsys, topckgen, vdecsys,
vencsys and ipu for Mediatek MT8183.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
fsl,imx50-evk has been used in a devicetree for a while. kobo,aura will
be used soon.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
MBa is a series of Carrier Boards / Single Board Computers (SBC) for
evaluation of TQMa SoMs.
The MBa7 carrier board can only interface with TQMa7 modules.
The TQMa7 module can only be mounted with NXP i.MX7 Solo or Dual SoCs.
Primary compatible strings are of the form "tq,<SoC>-<SBC>".
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MBUS controller drives the MBUS that other devices in the SoC will
use to perform DMA. It also has a register interface that allows to
monitor and control the bandwidth and priorities for masters on that
bus.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add new Xunlong Orange Pi 3 board compatible string to the bindings
documentation.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Beelink GS1 device-tree has been introduced.
Add it to the sunxi yaml documentation.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Commit fd73403a48 ("dt-bindings: arm: Add SMP enable-method for
Milbeaut") added support for a new cpu enable-method, but did so using
tabulations to ident. This is however invalid in the syntax, and resulted
in a failure when trying to use that schemas for validation.
Use spaces instead of tabs to indent to fix this.
Fixes: fd73403a48 ("dt-bindings: arm: Add SMP enable-method for Milbeaut")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Mighty is basically the same Chromebook as Jaq but it has a full-sized
SD slot and some different (slightly more rugged) plastics around it.
Like Jaq, Mighty may show up with various different brandings but all
of them have the same board inside.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit 1f8afea8fee0 ("dt-bindings: Add YAML description for Allwinner
boards") added an exhaustive list of the valid compatibles used for both
the SoCs and boards.
We can therefore remove the old documentation, that never got as well
updated as it should have.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
We've never had a board compatibles documentation for the Allwinner boards
so far.
Let's create a json-schema for them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
As far as I can tell/remember rev10 was originally created to support
making a SKU of jerry that had a different LCD. rev11-rev15 were
added to give some wiggle room for future builds. Downstream has a
separate device tree for rev10-rev15 (compared to rev3-rev7) with the
expectation that differences relating to the LCD would be accounted
for there but nothing was ever added to the rev10-rev15 making it
identical to the rev3-rev7 one.
It's likely nothing actually shipped with rev10-rev15 but they are
listed in the downstream kernel's device tree and it seems like it
should add a little safety if we match them here just in case
something actually shipped with one of these revisions and that device
will break if we don't claim support.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2
and has the following features :
- Amlogic G12A S905X2 SoC
- 10/100 Ethernet
- USB2 + USB3 ports
- Micro SDCard Port
- Audio + CVBS AV Jack port
- HDMI 2.1 + CEC Port
- ADC Touch Button
- Far-Field Microphone Array + Mono HP
- IR Sensor
- IR Emmiter LED Array
- RGB Led
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: sorted Makefile entry alphabetcially]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
