This patch adds documentation of device tree bindings for the
STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull pin control updates from Linus Walleij:
"It is pretty calm and chill in pin control for the moment. Just
incremental development.
There is an odd patch to the Super-H architecture, it's coming from
the maintainers so should be fine.
Summary:
New drivers:
- Bitmain BM1880 pin controller
- Mediatek MT8516
- Cirrus Logich Lochnagar PMIC pins
Updates:
- Incremental development on Renesas SH-PFC
- Incremental development on Intel pin controller and some particular
updates for Cedarfork.
- Pin configuration support in Allwinner SunXi drivers
- Suspend/resume support in the NXP/Freescale i.MX8MQ driver
- Support for more packaging of the ST Micro STM32"
* tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: mcp23s08: Do not complain about unsupported params
pinctrl: Rework Kconfig dependency for BM1880 pinctrl driver
MAINTAINERS: Add entry for BM1880 pinctrl
pinctrl: Add pinctrl support for BM1880 SoC
dt-bindings: pinctrl: Add BM1880 pinctrl binding
pinctrl: stm32: check irq controller availability at probe
pinctrl: mediatek: Add MT8516 Pinctrl driver
pinctrl: zte: fix leaked of_node references
pinctrl: intel: Increase readability of intel_gpio_update_pad_mode()
pinctrl: intel: Retain HOSTSW_OWN for requested gpio pin
pinctrl: pistachio: fix leaked of_node references
pinctrl: sunxi: Support I/O bias voltage setting on H6
pinctrl: sunxi: Prepare for alternative bias voltage setting methods
pinctrl: st: fix leaked of_node references
pinctrl: samsung: fix leaked of_node references
pinctrl: stm32: align stm32mp157 pin names
pinctrl: stm32: add package information for stm32mp157c
pinctrl: stm32: introduce package support
dt-bindings: pinctrl: stm32: add new entry for package information
pinctrl: imx8mq: Add suspend/resume ops
...
Add pinctrl binding for Bitmain BM1880 SoC. The SoC is not capable
of handling pinconf, thereby supporting only pinmux and this limitation
is documented.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from
the documentation.
Changes since v2:
* Changed patch title to 'dt-bindings: pinctrl: imx7d:'
Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
like pull-enable, pull should be optional has this region is available on
every controllers. Also, the g12a feature a new region "ds" for the
drive-strength
All this region thing is one big mess. I suspect that there is only one
big GPIO region with holes in it. All registers between the current
regions reads '0' so it is probably just spare space to handle more pins.
Since we need to continue to handle the existing controllers, switching to
one single region now would not simplify things. However, if more
organisation layouts and features keep on being added, we may have to look
at this again
Fixes: 3cd3c83f67 ("pinctrl: Add compatibles for Amlogic Meson G12A pin controllers")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is a cleanup and fix of the patch by Ken Ma <make@marvell.com>.
Fix the mpp definitions according to newest revision of the
specification:
- northbridge:
fix pmic1 gpio number to 7
fix pmic0 gpio number to 6
- southbridge
split pcie1 group bit mask to BIT(5) and BIT(9)
fix ptp group bit mask to BIT(11) | BIT(12) | BIT(13)
add smi group with bit mask BIT(4)
[gregory: split the pcie group in 2, as at hardware level they can be
configured separately]
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jaguar2 has the same register layout as Ocelot but it has 64 pins, meaning
that there are 2 registers instead of one.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As pointed by Rob, CRU is a kind of block that can't be guaranteed to
have everything exposed as subnodes. It's a set of various registers
that aren't tied to any single device. It could be described much more
accurately as MFD (Multi-Function Device).
Some hardware blocks may indeed want to access a register or two of the
CRU which requires describing it as the "syscon".
While at it replace exmple node name with the standard "pinctrl" (also
pointed out by Rob).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl node can have multiple regulators for each of its GPIO banks.
Add the property descriptions.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rather than gpio1-gpio11 for pms405, there are 12 GPIOs for pms405.
But gpio1, gpio9 and gpio10 are not available. Fix the bindings doc
to make it correct for pms405.
Fixes: ed80f6eb79 ("dt-bindings: pinctrl: qcom-pmic-gpio: Add pms405 support")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sh-pfc: Updates for v4.21
- Fix VIN (Video IN) versioned groups on R-Car V2H, H3, and M3-W,
- Add I2C[0-3], DU1, VIN, QSPI1, and SDHI pin groups on RZ/G1C,
- Add audio, SDHI, VIN, HSCIF, and CAN(FD) support on R-Car E3,
- Add QSPI pin groups on R-Car V3M and V3H,
- Add VIN and CAN(FD) pin groups on R-Car M3-N,
- Add I2C[035] pin groups on R-Car H3 and M3-W,
- Add pinctrl and GPIO support for the new RZ/A2M (R7S9210) SoC,
- Small cleanups,
- Maintainership updates.
Broadcom SoC pins are controlled using CRU ("Clock and Reset Unit" or
"Central Resource Unit") registers. There are more CRU registers and
functions so CRU should be represented as a separated block in DT.
Moreover CRU is a sub-block of DMU ("Device Management Unit") so that
one should also get its own node.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sh-pfc: Updates for v4.20 (take three)
- Add support for the new RZ/N1D (R9A06G032) and RZ/N1S (R9A06G033)
SoCs,
- Add INTC-EX pin groups on R-Car E3.
Northstar has mux controller just like Northstar Plus and Northstar2.
It's a bit different though (different registers & pins) so it requires
its own binding.
It's needed to allow other block bindings specify required mux setup.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Renesas RZ/N1 device family PINCTRL node description.
Based on a patch originally written by Michel Pollet at Renesas.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
pinctrl: sh-pfc: Updates for v4.20 (take two)
- Add MSIOF pin groups on R-Car E3 and D3,
- Add support for the new RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs,
- Add I2C4, DU0, QSPI0, SDHI2, and USB pin groups on RZ/G1C,
- Convert to SPDX license identifiers,
- Small cleanups.
pinctrl: sh-pfc: Updates for v4.20
- Add SATA and audio pin groups on R-Car M3-N,
- Add EtherAVB pin groups on RZ/G1C,
- Add PWM and display (DU) pin groups on R-Car E3,
- Add support for the new RZ/G2M (r8a774a1) SoC.
The pinctrl-ingenic driver now supports the JZ4725B SoC.
Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic
driver is now responsible for providing the GPIO functionality.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull MFD updates from Lee Jones:
"New Drivers:
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
New Device Support:
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
New Functionality:
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
Fix-upsL
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
Bug Fixes:
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501"
* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: madera: Add register definitions for accessory detect
mfd: sm501: Set coherent_dma_mask when creating subdevices
mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
mfd: bd71837: Core driver for ROHM BD71837 PMIC
media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
mfd: sec-core: Export OF module alias table
mfd: as3722: Disable auto-power-on when AC OK
mfd: axp20x: Support AXP806 in I2C mode
mfd: axp20x: Add self-working mode support for AXP806
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
mfd: rave-sp: Add legacy watchdog ping command translation
mfd: rave-sp: Add legacy EEPROM access command translation
mfd: rave-sp: Initialize flow control and parity of the port
mfd: rave-sp: Fix incorrectly specified checksum type
mfd: rave-sp: Remove unused defines
mfd: hi655x: Fix regmap area declared size for hi655x
mfd: ti_am335x_tscadc: Fix struct clk memory leak
...
