In selftests/live_hangcheck, we have a lot of tests for resetting simple
spinners, but nothing quite prepared us for how the GPU reacted to
triggering a reset outside of the safe spinner. These two subtests fill
the ring with plain old empty, non-spinning requests, and then triggers
a reset. Without a user-payload to blame, these requests will exercise
the 'non-started' paths and mostly be replayed verbatim.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-4-chris@chris-wilson.co.uk
To determine whether an engine has 'stuck', we simply check whether or
not is still on the same seqno for several seconds. To keep this simple
mechanism intact over the loss of a global seqno, we can simply add a
new global heartbeat seqno instead. As we cannot know the sequence in
which requests will then be completed, we use a primitive random number
generator instead (with a cycle long enough to not matter over an
interval of a few thousand requests between hangcheck samples).
The alternative to using a dedicated seqno on every request is to issue
a heartbeat request and query its progress through the system. Sadly
this requires us to reduce struct_mutex so that we can issue requests
without requiring that bkl.
v2: And without the extra CS_STALL for the hangcheck seqno -- we don't
need strict serialisation with what comes later, we just need to be sure
we don't write the hangcheck seqno before our batch is flushed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226094922.31617-1-chris@chris-wilson.co.uk
Depends on GEN family and I915_PARAM_HAS_CONTEXT_ISOLATION, Mesa driver
will decide whether constant buffer 0 address is relative or absolute,
and load GPU initial state by lri to context mmio INSTPM (GEN8)
or 0x20D8 (>=GEN9).
Mesa Commit fa8a764b62
("i965: Use absolute addressing for constant buffer 0 on Kernel 4.16+.")
INSTPM is already added to gen8_engine_mmio_list, but 0x20D8 is missed
in gen9_engine_mmio_list. From GVT point of view, different guest could
have different context so should switch those mmio accordingly.
v2: Update fixes commit ID.
Fixes: 1786571393 ("drm/i915/gvt: vGPU context switch")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Annoyingly, struct_mutex was not entirely eliminated from the reset
pathway; for reasons of its own, intel_display_resume() requires
struct_mutex to prepare the planes it already captured. To avoid the
immediate problem of a deadlock between the struct_mutex and the reset
srcu, we have to acquire the reset_lock before struct_mutex in
i915_gem_fault(). Now any wait underneath struct_mutex will result us in
having to forcibly reset all inflight rendering, less than ideal, but
better than a deadlock (and will do for the short term).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221102924.13442-1-chris@chris-wilson.co.uk
When MI_FLUSH_DW post write hw status page in index mode, the index
value is in dword step and turned into address offset in cmd dword1.
As status page size is 4K, so can't exceed that.
This fixed upper bound check in cmd parser code which incorrectly
stopped VM for reason of invalid MI_FLUSH_DW write index.
v2:
- Fix upper bound as 4K page size because index value is address offset.
Fixes: be1da7070a ("drm/i915/gvt: vGPU command scanner")
Cc: stable@vger.kernel.org # v4.10+
Cc: "Zhao, Yan Y" <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Introduce a new ABI method for detecting a wedged driver by reporting
-EIO from DRM_IOCTL_I915_GEM_CONTEXT_CREATE.
This came up in considering how to handle context recovery from
userspace. There we wish to create a new context after the original is
banned (the clients opts into the no recovery after reset strategy) in
order to rebuild the mesa context from scratch. In doing so, if the
device was wedged and not the context banned, we would fall into a loop
of permanently trying to recreate the context and never making forward
progress. This patch would inform the client that we are no longer able
to create a context, and the client would have no choice but to abort
(or at least inform its callers about the lost device for anv).
References: https://lists.freedesktop.org/archives/mesa-dev/2019-February/215469.html
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220225556.28715-1-chris@chris-wilson.co.uk
DP CRCs don't really work on g4x. If you want any CRCs on DP you must
select the CRC source before the port is enabled, otherwise the CRC
source select bits simply ignore any writes to them. And once the port
is enabled we mustn't change the CRC source select until the port is
disabled. That almost works, but not quite :( Eventually the CRC source
select bits get permanently stuck one way or the other, and after that
a reboot (or possibly a display reset) is needed to get working CRCs
on that pipe (not matter which CRC source we try to use).
Additionally the DFT scrambler reset bits we're trying to use don't
seem to exist on g4x. There are some potentially relevant looking bits
in the pipe registers, but when I tried it I got stable looking CRCs
without setting any bits for this.
If there is a way to make DP CRCs work reliably on g4x, I wasn't
able to find it. So let's just remove the broken code we have.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Limit deboosting and boosting to keep ourselves at the extremes
when in the respective power modes (i.e. slowly decrease frequencies
while in the HIGH_POWER zone and slowly increase frequencies while
in the LOW_POWER zone). On idle, we will hit the timeout and drop
to the next level quickly, and conversely if busy we expect to
hit a waitboost and rapidly switch into max power.
This should improve the UX experience by keeping the GPU clocks higher
than they ostensibly should be (based on simple busyness) by switching
into the INTERACTIVE mode (due to waiting for pageflips) and increasing
clocks via waitboosting. This will incur some additional power, our
saving grace should be rc6 and powergating to keep the extra current
draw in check.
Food for future thought would be deadline scheduling? If we know certain
contexts (high priority compositors) absolutely must hit the next vblank
then we can raise the frequencies ahead of time. Part of this is covered
by per-context frequencies, where userspace is given control over the
frequency range they want the GPU to execute at (for largely the same
problem as this, where the workload is very latency sensitive but at the
EI level appears mostly idle). Indeed, the per-context series does
extend the modeset boosting to include a frequency range tweak which
seems applicable to solving this jittery UX behaviour.
Reported-by: Lyude Paul <lyude@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109408
References: 0d55babc83 ("drm/i915: Drop stray clearing of rps->last_adj")
References: 60548c554b ("drm/i915: Interactive RPS mode")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Quoting Lyude Paul:
> Before reverting 0d55babc83: [4.20]
>
> 35 measurements [of gnome-shell animations]
> Average: 33.65657142857143 FPS
> FPS observed: 20.8 - 46.87 FPS
> Percentage under 60 FPS: 100.0%
> Percentage under 55 FPS: 100.0%
> Percentage under 50 FPS: 100.0%
> Percentage under 45 FPS: 97.14285714285714%
> Percentage under 40 FPS: 97.14285714285714%
> Percentage under 35 FPS: 45.714285714285715%
> Percentage under 30 FPS: 11.428571428571429%
> Percentage under 25 FPS: 2.857142857142857%
>
> After reverting: [4.19 behaviour]
>
> 30 measurements
> Average: 49.833666666666666 FPS
> FPS observed: 33.85 - 60.0 FPS
> Percentage under 60 FPS: 86.66666666666667%
> Percentage under 55 FPS: 70.0%
> Percentage under 50 FPS: 53.333333333333336%
> Percentage under 45 FPS: 20.0%
> Percentage under 40 FPS: 6.666666666666667%
> Percentage under 35 FPS: 6.666666666666667%
> Percentage under 30 FPS: 0%
> Percentage under 25 FPS: 0%
>
> Patched:
> 42 measurements
> Average: 46.05428571428571 FPS
> FPS observed: 1.82 - 59.98 FPS
> Percentage under 60 FPS: 88.09523809523809%
> Percentage under 55 FPS: 61.904761904761905%
> Percentage under 50 FPS: 45.23809523809524%
> Percentage under 45 FPS: 35.714285714285715%
> Percentage under 40 FPS: 33.33333333333333%
> Percentage under 35 FPS: 19.047619047619047%
> Percentage under 30 FPS: 7.142857142857142%
> Percentage under 25 FPS: 4.761904761904762%
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-13-chris@chris-wilson.co.uk
HDCP transmitter is supposed to indicate the HDCP encryption status of
the link through enc_en signals in a window of time called "window of
opportunity" defined by HDCP HDMI spec.
But on KBL this timing of signalling has an issue. To fix the issue this
WA of resetting the signalling is required.
v2:
WA is moved into the toggle_signalling [Daniel]
v3:
Commit msg is rewritten with more information
v4:
Reviewed-by Daniel.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-17-git-send-email-ramalingam.c@intel.com
Implements the
Waitqueue is created to wait for CP_IRQ
Signaling the CP_IRQ arrival through atomic variable.
For applicable DP HDCP2.2 msgs read wait for CP_IRQ.
As per HDCP2.2 spec "HDCP Transmitters must process CP_IRQ interrupts
when they are received from HDCP Receivers"
Without CP_IRQ processing, DP HDCP2.2 H_Prime msg was getting corrupted
while reading it based on corresponding status bit. This creates the
random failures in reading the DP HDCP2.2 msgs.
v2:
CP_IRQ arrival is tracked based on the atomic val inc [daniel]
Recording the reviewed-by Daniel from IRC.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-16-git-send-email-ramalingam.c@intel.com
Implements the HDMI adaptation specific HDCP2.2 operations.
Basically these are DDC read and write for authenticating through
HDCP2.2 messages.
v2: Rebased.
v3:
No more special handling of Gmbus burst read for AKE_SEND_CERT.
Style fixed with few naming. [Uma]
%s/PARING/PAIRING
v4:
msg_sz is initialized at definition.
Lookup table is defined for HDMI HDCP2.2 msgs [Daniel].
v5: Rebased.
v6:
Make a function as inline [Uma]
%s/uintxx_t/uxx
v7:
Errors due to sinks are reported as DEBUG logs.
Adjust to the new mei interface.
v8:
ARRAY_SIZE for the # of array members [Jon & Daniel].
hdcp adaptation is added as a const in the hdcp_shim [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-15-git-send-email-ramalingam.c@intel.com
Implements the DP adaptation specific HDCP2.2 functions.
These functions perform the DPCD read and write for communicating the
HDCP2.2 auth message back and forth.
v2:
wait for cp_irq is merged with this patch. Rebased.
v3:
wait_queue is used for wait for cp_irq [Chris Wilson]
v4:
Style fixed.
%s/PARING/PAIRING
Few style fixes [Uma]
v5:
Lookup table for DP HDCP2.2 msg details [Daniel].
Extra lines are removed.
v6: Rebased.
v7:
Fixed some regression introduced at v5. [Ankit]
Macro HDCP_2_2_RX_CAPS_VERSION_VAL is reused [Uma]
Converted a function to inline [Uma]
%s/uintxx_t/uxx
v8:
Error due to the sinks are reported as DEBUG logs.
Adjust to the new mei interface.
v9:
ARRAY_SIZE for no of array members [Jon & Daniel]
return of the wait_for_cp_irq is made as void [Daniel]
Wait for HDCP2.2 msg is done based on polling the reg bit than
CP_IRQ based. [Daniel]
hdcp adaptation is added as a const in the hdcp_shim [Daniel]
v10:
config_stream_type is redefined [Daniel]
DP Errata specific defines are moved into intel_dp.c.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ankit K Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-14-git-send-email-ramalingam.c@intel.com
Implements the link integrity check once in 500mSec.
Once encryption is enabled, an ongoing Link Integrity Check is
performed by the HDCP Receiver to check that cipher synchronization
is maintained between the HDCP Transmitter and the HDCP Receiver.
On the detection of synchronization lost, the HDCP Receiver must assert
the corresponding bits of the RxStatus register. The Transmitter polls
the RxStatus register and it may initiate re-authentication.
v2:
Rebased.
v3:
enum check_link_response is used check the link status [Uma]
v4:
Rebased as part of patch reordering.
v5:
Required members of intel_hdcp is defined [Sean Paul]
v6:
hdcp2_check_link is cancelled at required places.
v7:
Rebased for the component i/f changes.
Errors due to the sinks are reported as DEBUG logs.
v8:
hdcp_check_work is used for both hdcp1 and hdcp2 check_link [Daniel]
hdcp2.2 encryption status check is put under WARN_ON [Daniel]
drm_hdcp.h changes are moved into separate patch [Daniel]
v9:
enum check_link_status is defined at intel_drv.h [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-11-git-send-email-ramalingam.c@intel.com
Implements the HDCP2.2 repeaters authentication steps such as verifying
the downstream topology and sending stream management information.
v2: Rebased.
v3:
-EINVAL is returned for topology error and rollover scenario.
Endianness conversion func from drm_hdcp.h is used [Uma]
v4:
Rebased as part of patches reordering.
Defined the mei service functions [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
v6:
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new mei interface.
style issue fixed.
v8:
drm_hdcp.h change is moved into separate patch [Daniel]
v9:
%s/__swab16/cpu_to_be16. [Tomas]
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-9-git-send-email-ramalingam.c@intel.com
Implements HDCP2.2 authentication for hdcp2.2 receivers, with
following steps:
Authentication and Key exchange (AKE).
Locality Check (LC).
Session Key Exchange(SKE).
DP Errata for stream type configuration for receivers.
At AKE, the HDCP Receiver’s public key certificate is verified by the
HDCP Transmitter. A Master Key k m is exchanged.
At LC, the HDCP Transmitter enforces locality on the content by
requiring that the Round Trip Time (RTT) between a pair of messages
is not more than 20 ms.
At SKE, The HDCP Transmitter exchanges Session Key ks with
the HDCP Receiver.
In DP HDCP2.2 encryption and decryption logics use the stream type as
one of the parameter. So Before enabling the Encryption DP HDCP2.2
receiver needs to be communicated with stream type. This is added to
spec as ERRATA.
This generic implementation is complete only with the hdcp2 specific
functions defined at hdcp_shim.
v2: Rebased.
v3:
%s/PARING/PAIRING
Coding style fixing [Uma]
v4:
Rebased as part of patch reordering.
Defined the functions for mei services. [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Required intel_hdcp members are defined [Sean Paul]
v6:
Typo of cipher is Fixed [Uma]
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new interface.
Avoid using bool structure members. [Tomas]
v8: Rebased.
v9:
bool is used in struct intel_hdcp [Daniel]
config_stream_type is redesigned [Daniel]
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-8-git-send-email-ramalingam.c@intel.com
Considering that HDCP2.2 is more secure than HDCP1.4, When a setup
supports HDCP2.2 and HDCP1.4, HDCP2.2 will be enabled.
When HDCP2.2 enabling fails and HDCP1.4 is supported, HDCP1.4 is
enabled.
This change implements a sequence of enabling and disabling of
HDCP2.2 authentication and HDCP2.2 port encryption.
v2:
Included few optimization suggestions [Chris Wilson]
Commit message is updated as per the rebased version.
intel_wait_for_register is used instead of wait_for. [Chris Wilson]
v3:
Extra comment added and Style issue fixed [Uma]
v4:
Rebased as part of patch reordering.
HDCP2 encryption status is tracked.
HW state check is moved into WARN_ON [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Merged patches related to hdcp2.2 enabling and disabling [Sean Paul].
Required shim functionality is defined [Sean Paul]
v6:
Return values are handles [Uma]
Realigned the code.
Check for comp_master is removed.
v7:
HDCP2.2 is attempted only if mei interface is up.
Adjust to the new interface
Avoid bool usage in struct [Tomas]
v8:
mei_binded status check is removed.
%s/hdcp2_in_use/hdcp2_encrypted
v9:
bool is used in struct intel_hdcp. [Daniel]
v10:
panel is replaced with sink [Uma]
Mei interface decided the hdcp2_capability.
WARN_ON if hdcp_enable is called when hdcp state is ENABLED.
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-7-git-send-email-ramalingam.c@intel.com
"hdcp_encrypted" flag is defined to denote the HDCP1.4 encryption status.
This SW tracking is used to determine the need for real hdcp1.4 disable
and hdcp_check_link upon CP_IRQ.
On CP_IRQ we filter the CP_IRQ related to the states like Link failure
and reauthentication req etc and handle them in hdcp_check_link.
CP_IRQ corresponding to the authentication msg availability are ignored.
WARN_ON is added for the abrupt stop of HDCP encryption of a port.
v2:
bool is used in struct for the cleaner coding. [Daniel]
check_link work_fn is scheduled for cp_irq handling [Daniel]
v3:
rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-6-git-send-email-ramalingam.c@intel.com
Defining the mei-i915 interface functions and initialization of
the interface.
v2:
Adjust to the new interface changes. [Tomas]
Added further debug logs for the failures at MEI i/f.
port in hdcp_port data is equipped to handle -ve values.
v3:
mei comp is matched for global i915 comp master. [Daniel]
In hdcp_shim hdcp_protocol() is replaced with const variable. [Daniel]
mei wrappers are adjusted as per the i/f change [Daniel]
v4:
port initialization is done only at hdcp2_init only [Danvet]
v5:
I915 registers a subcomponent to be matched with mei_hdcp [Daniel]
v6:
HDCP_disable for all connectors incase of comp_unbind.
Tear down HDCP comp interface at i915_unload [Daniel]
v7:
Component init and fini are moved out of connector ops [Daniel]
hdcp_disable is not called from unbind. [Daniel]
v8:
subcomponent name is dropped as it is already merged.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [v11]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-5-git-send-email-ramalingam.c@intel.com
Add the HDCP2.2 initialization to the existing HDCP1.4 stack.
v2:
mei interface handle is protected with mutex. [Chris Wilson]
v3:
Notifiers are used for the mei interface state.
v4:
Poll for mei client device state
Error msg for out of mem [Uma]
Inline req for init function removed [Uma]
v5:
Rebase as Part of reordering.
Component is used for the I915 and MEI_HDCP interface [Daniel]
v6:
HDCP2.2 uses the I915 component master to communicate with mei_hdcp
- [Daniel]
Required HDCP2.2 variables defined [Sean Paul]
v7:
intel_hdcp2.2_init returns void [Uma]
Realigning the codes.
v8:
Avoid using bool structure members.
MEI interface related changes are moved into separate patch.
Commit msg is updated accordingly.
intel_hdcp_exit is defined and used from i915_unload
v9:
Movement of the hdcp_check_link is moved to new patch [Daniel]
intel_hdcp2_exit is removed as mei_comp will be unbind in i915_unload.
v10:
bool is used in struct to make coding simpler. [Daniel]
hdmi hdcp init is placed correctly after encoder attachment.
v11:
hdcp2_capability check is moved into hdcp.c [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-4-git-send-email-ramalingam.c@intel.com
At a few points in our uABI, we check to see if the driver is wedged and
report -EIO back to the user in that case. However, as we perform the
check and reset asynchronously (where once before they were both
serialised by the struct_mutex), we may instead see the temporary wedging
used to cancel inflight rendering to avoid a deadlock during reset
(caused by either us timing out in our reset handler,
i915_wedge_on_timeout or with malice aforethought in intel_reset_prepare
for a stuck modeset). If we suspect this is the case, that is we see a
wedged driver *and* reset in progress, then wait until the reset is
resolved before reporting upon the wedged status.
v2: might_sleep() (Mika)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109580
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220145637.23503-1-chris@chris-wilson.co.uk
The intel_vgpu_oos_page uses the combined structure, which embeds the
tracked page. As it is allocated by kmalloc, the size(4140) is aligned
to 8192. The 8192 oos_pages will waste about 32M memory.
So the tracked page is split from the intel_vgpu_oos_page. And this will
help to assure that the access of tracked page is cache aligned.
Another minor change is that it doesn't need to be cleared to zero as
it is writen firstly when one page is added to oos_page list.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently it will take the snapshot of the MCHBAR registers for gvt-g
initialization so that it can be used for guest vgpu. And it will cover
from 0x140000 to 0x17ffff. In fact based on the HW spec most of them are
meanlingless and some time is wasted to read these register.
Only the range of 0x144000 to 0x147fff contains the valid definition.
So the range of capturing I915 MCHBAR register is refined, which helps
to optimize the gvt-g boot time.
V1->V2: Move the register definition into reg.h
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch attaches the colorspace connector property to the
hdmi connector. Based on colorspace change, modeset will be
triggered to switch to new colorspace.
Based on colorspace property value create an infoframe
with appropriate colorspace. This can be used to send an
infoframe packet with proper colorspace value set which
will help to enable wider color gamut like BT2020 on sink.
This patch attaches and enables HDMI colorspace, DP will be
taken care separately.
v2: Merged the changes of creating infoframe as well to this
patch as per Maarten's suggestion.
v3: Addressed review comments from Shashank. Separated HDMI
and DP colorspaces as suggested by Ville and Maarten.
v4: Addressed Chris and Ville's review comments, and created a
common colorspace property for DP and HDMI, filtered the list
based on the colorspaces supported by the respective protocol
standard. Handle the default case properly.
v5: Merged the DP handling along with platform colorspace
handling as per Shashank's comments.
v6: Reverted to old design of exposing all colorspaces to
userspace as per Ville's review comment
v7: Fixed a checkpatch complaint, Addressed Maarten' review
comment, updated the RB from Maarten and Jani's ack.
v8: Moved colorspace AVI Infoframe programming to drm core and
removed from driver as per Ville's suggestion.
v9: Added a check to only allow RGB colorpsaces to be set in
infoframe though the colorspace property. Since there is no output
csc property to control planar formats and it will be added later.
Changes for RGB->YUV conversion inside driver without userspace
knowledge is still supported. This is as per Ville's suggestion.
v10: Fixed an error in if check.
v11: Dropped the check for planar vs RGB and allow all the colorspaces.
Onus will be on userspace to pick whatever pipe output it is able to
drive.
v12: Added Ville's RB.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1550596381-993-4-git-send-email-uma.shankar@intel.com
