A collection of very small cleanups/improvements around doorbell checking
that do not deserve their own patch:
- Move doorbell-related HW defs to intel_guc_reg.h
- use GUC_NUM_DOORBELLS instead of GUC_DOORBELL_INVALID where
appropriate
- do not stop on error in guc_verify_doorbells
- do not print drbreg on error: the only content of the register
apart from the valid bit is the lower part of the physical memory
address, which we can't use even if valid because we don't know
which descriptor it came from (since the doorbell is in an unexpected
state)
- Move the checking of doorbell valid bit to a common helper.
v2: add more cleanups (move defs, use GUC_NUM_DOORBELLS, don't stop in
guc_verify_doorbells) (Michal)
v3: move more things to intel_guc_reg, redefine
GUC_DOORBELL_INVALID (Michal), drop guc_doorbell_qw since it just
duplicates guc_doorbell_info
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022230427.5616-3-daniele.ceraolospurio@intel.com
The UCLK is forced to highest at the start of display configuration
change. Downgrade the UCLK from highest after display configuration change.
Otherwise, we may see the UCLK stuck in the highest in some cases.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OverDrive mode allows users to increase the maximum SCLK and MCLK
frequencies beyond the default on the GPU. However, this may not
results in large performance gains if the GPU then runs into its TDP
power limit. This patch adds the capability to increase the power
limit of a GPU above its default maximum.
This is only allowed when overdrive is enabled in the ppfeaturemask,
since this is an overdrive feature. The TDPODLimit value from the
VBIOS describes how how much higher the TDP should be allowed to go
over its default, in percentage.
v2: Moved dereference of hwmgr to after its validity check
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In a refactor, the watermark clock inputs to
powerplay from DC were changed from units of 10kHz to
kHz clocks.
One division by 100 was not converted into a division
by 1000.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forcing clock level is supported under manual dpm mode only. Error out
when trying to set under manual mode. Instead of doing nothing and
reporting success.
V2: update for mclk/pcie clock level settings also
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch programs DSI operation mode, pixel format,
BGR info, link calibration etc for the DSI transcoder.
This patch also extract BGR info of the DSI panel from
VBT and save it inside struct intel_dsi which used for
configuring DSI transcoder.
v2: Rebase
v3: Use newly defined bitfields.
v4 by Jani:
- Use intel_dsi_bitrate()
- Make bgr_enabled bool
- Use 0 instead of 0x0
- Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode
- Use is_vid_mode()
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7de4e39a4b2a18e53a2b9d9cea5b5b4c9d6eeb34.1539613303.git.jani.nikula@intel.com
This patch programs D-PHY timing parameters for the
clock and data lane (in escape clocks) of DSI
controller (DSI port 0 and 1).
These programmed timings would be used by DSI Controller
to calculate link transition latencies of the data and
clock lanes.
v2: Use newly defined bitfields for data and clock lane
v3 by Jani:
- Rebase on dphy abstraction
- Reduce local variables
- Remove unrelated comment changes (Ville)
- Use the same style for range checks as VLV (Ville)
- Assign, don't OR dphy_reg contents
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70d491e2357f328a63b67ea3c43cb57a1d469c15.1539613303.git.jani.nikula@intel.com
Currently the guest couldn't boot up under GVT-g environment as the
following call trace exists:
[ 272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
[ 272.504834] Call Trace:
[ 272.504852] execlists_context_pin+0x2b2/0x520 [i915]
[ 272.504869] intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915]
[ 272.504887] intel_vgpu_create_workload+0x3e2/0x570 [i915]
[ 272.504901] intel_vgpu_submit_execlist+0xc0/0x2a0 [i915]
[ 272.504916] elsp_mmio_write+0xc7/0x130 [i915]
[ 272.504930] intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915]
[ 272.504944] intel_vgpu_emulate_mmio_write+0xac/0x240 [i915]
[ 272.504947] intel_vgpu_rw+0x22d/0x270 [kvmgt]
[ 272.504949] intel_vgpu_write+0x164/0x1f0 [kvmgt]
GVT GEM context is created by i915_gem_context_create_gvt() which
doesn't allocate ppgtt. So GVT GEM context structure doesn't have
a valid i915_hw_ppgtt.
This patch create ppgtt table at GVT GEM context creation, then assign
shadow ppgtt's root table address to this ppgtt when shadow ppgtt will
be used on GPU. So GVT GEM context has valid ppgtt address. But note
that this ppgtt only contain valid ppgtt root table address, the table
entry in this ppgtt structure are invalid.
Fixes:4a3d3f6785be("drm/i915: Match code to comment and enforce ppgtt for execlists")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1539841231-3157-1-git-send-email-xiong.y.zhang@intel.com
As mentioned in the previous commit, we currently prevent new modesets
on recently-removed MST connectors by returning no encoder from our
->best_encoder() callback once the MST port has disappeared. This is
wrong however, because it prevents legacy modesetting users from being
able to disable CRTCs on MST connectors after the connector's respective
topology has disappeared.
So, fix this by instead by just always returning a valid encoder.
Changes since v2:
- Remove usage of atomic MST helper for now, since that got replaced
with a much simpler solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com
(cherry picked from commit e87b0bbc9f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Unfortunately, it appears our fix in:
commit b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")
Which attempted to work around the problems introduced by:
commit 4d80273976 ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")
Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().
So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.
Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.
Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
patchset in igt@drv_module_reload@basic-reload-inject and
igt@drv_module_reload@basic-reload by checking if the connector is
registered instead of unregistered, as calling drm_connector_cleanup()
on a connector that hasn't been registered with userspace yet should
stay valid.
- Remove unregistered_connector_check(), and just go back to what we
were doing before in commit 4d80273976 ("drm/atomic_helper: Disallow
new modesets on unregistered connectors") except replacing
READ_ONCE(connector->registered) with drm_connector_is_unregistered().
This gets rid of the behavior of allowing DPMS On<->Off, but that should
be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.
Fixes: b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
(cherry picked from commit 39b50c6038)
Fixes: e96550956f ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Fixes: 34ca26a98a ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It appears when testing my previous fix for some of the legacy
modesetting issues with MST, I misattributed some kernel splats that
started appearing on my machine after a rebase as being from upstream.
But it appears they actually came from my patch series:
[ 2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
[ 2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
[ 2.980516] ------------[ cut here ]------------
[ 2.980519] Could not determine valid watermarks for inherited state
[ 2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
[ 2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G O 4.19.0-rc7Lyude-Test+ #1
[ 2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
[ 2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
[ 2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
[ 2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
[ 2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
[ 2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
[ 2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
[ 2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
[ 2.980630] FS: 00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
[ 2.980633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
[ 2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.980645] Call Trace:
[ 2.980675] i915_driver_load+0xb0e/0xdc0 [i915]
[ 2.980681] ? kernfs_add_one+0xe7/0x130
[ 2.980709] i915_pci_probe+0x46/0x60 [i915]
[ 2.980715] pci_device_probe+0xd4/0x150
[ 2.980719] really_probe+0x243/0x3b0
[ 2.980722] driver_probe_device+0xba/0x100
[ 2.980726] __driver_attach+0xe4/0x110
[ 2.980729] ? driver_probe_device+0x100/0x100
[ 2.980733] bus_for_each_dev+0x74/0xb0
[ 2.980736] driver_attach+0x1e/0x20
[ 2.980739] bus_add_driver+0x159/0x230
[ 2.980743] ? 0xffffffffa0393000
[ 2.980746] driver_register+0x70/0xc0
[ 2.980749] ? 0xffffffffa0393000
[ 2.980753] __pci_register_driver+0x57/0x60
[ 2.980780] i915_init+0x55/0x58 [i915]
[ 2.980785] do_one_initcall+0x4a/0x1c4
[ 2.980789] ? do_init_module+0x27/0x210
[ 2.980793] ? kmem_cache_alloc_trace+0x131/0x190
[ 2.980797] do_init_module+0x60/0x210
[ 2.980800] load_module+0x2063/0x22e0
[ 2.980804] ? vfs_read+0x116/0x140
[ 2.980807] ? vfs_read+0x116/0x140
[ 2.980811] __do_sys_finit_module+0xbd/0x120
[ 2.980814] ? __do_sys_finit_module+0xbd/0x120
[ 2.980818] __x64_sys_finit_module+0x1a/0x20
[ 2.980821] do_syscall_64+0x5a/0x110
[ 2.980824] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2.980826] RIP: 0033:0x7f4754e32879
[ 2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
[ 2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
[ 2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
[ 2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
[ 2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
[ 2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
[ 2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[ 2.980884] ---[ end trace 5eb47a76277d4731 ]---
The cause of this appears to be due to the fact that if there's
pre-existing display state that was set by the BIOS when i915 loads, it
will attempt to perform a modeset before the driver is registered with
userspace. Since this happens before the driver's registered with
userspace, it's connectors are also unregistered and thus-states which
would turn on DPMS on a connector end up getting rejected since the
connector isn't registered.
These bugs managed to get past Intel's CI partially due to the fact it
never ran a full test on my patches for some reason, but also because
all of the tests unload the GPU once before running. Since this bug is
only really triggered when the drivers tries to perform a modeset before
it's been fully registered with userspace when coming from whatever
display configuration the firmware left us with, it likely would never
have been picked up by CI in the first place.
After some discussion with vsyrjala, we decided the best course of
action would be to just move the unregistered connector checks out of
update_connector_routing() and into drm_atomic_set_crtc_for_connector().
The reason for this being that legacy modesetting isn't going to be
expecting failures anywhere (at least this is the case with X), so
ideally we want to ensure that any DPMS changes will still work even on
unregistered connectors. Instead, we now only reject new modesets which
would change the current CRTC assigned to an unregistered connector
unless no new CRTC is being assigned to replace the connector's previous
one.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 4d80273976 ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com
(cherry picked from commit b5d29843d8)
Fixes: e96550956f ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
With the exception of modesets which would switch the DPMS state of a
connector from on to off, we want to make sure that we disallow all
modesets which would result in enabling a new monitor or a new mode
configuration on a monitor if the connector for the display in question
is no longer registered. This allows us to stop userspace from trying to
enable new displays on connectors for an MST topology that were just
removed from the system, without preventing userspace from disabling
DPMS on those connectors.
Changes since v5:
- Fix typo in comment, nothing else
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-2-lyude@redhat.com
(cherry picked from commit 4d80273976)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This fixes a general protection fault, caused by accessing the contents
of a flip_done completion object that has already been freed. It occurs
due to the preemption of a non-blocking commit worker thread W by
another commit thread X. X continues to clear its atomic state at the
end, destroying the CRTC commit object that W still needs. Switching
back to W and accessing the commit objects then leads to bad results.
Worker W becomes preemptable when waiting for flip_done to complete. At
this point, a frequently occurring commit thread X can take over. Here's
an example where W is a worker thread that flips on both CRTCs, and X
does a legacy cursor update on both CRTCs:
...
1. W does flip work
2. W runs commit_hw_done()
3. W waits for flip_done on CRTC 1
4. > flip_done for CRTC 1 completes
5. W finishes waiting for CRTC 1
6. W waits for flip_done on CRTC 2
7. > Preempted by X
8. > flip_done for CRTC 2 completes
9. X atomic_check: hw_done and flip_done are complete on all CRTCs
10. X updates cursor on both CRTCs
11. X destroys atomic state
12. X done
13. > Switch back to W
14. W waits for flip_done on CRTC 2
15. W raises general protection fault
The error looks like so:
general protection fault: 0000 [#1] PREEMPT SMP PTI
**snip**
Call Trace:
lock_acquire+0xa2/0x1b0
_raw_spin_lock_irq+0x39/0x70
wait_for_completion_timeout+0x31/0x130
drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper]
amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu]
commit_tail+0x3d/0x70 [drm_kms_helper]
process_one_work+0x212/0x650
worker_thread+0x49/0x420
kthread+0xfb/0x130
ret_from_fork+0x3a/0x50
Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O)
gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm(O) drm(O)
Note that i915 has this issue masked, since hw_done is signaled after
waiting for flip_done. Doing so will block the cursor update from
happening until hw_done is signaled, preventing the cursor commit from
destroying the state.
v2: The reference on the commit object needs to be obtained before
hw_done() is signaled, since that's the point where another commit
is allowed to modify the state. Assuming that the
new_crtc_state->commit object still exists within flip_done() is
incorrect.
Fix by getting a reference in setup_commit(), and releasing it
during default_clear().
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
Replace the kvmalloc_array() with i915_gem_object_get_dma_address() when
populating rotated vmas. One random access mechanism ought to be enough
for everyone?
To calculate the size of the radix tree I think we can do
something like this (assuming 64bit pointers):
num_pages = obj_size / 4096
tree_height = ceil(log64(num_pages))
num_nodes = sum(64^n, n, 0, tree_height-1)
tree_size = num_nodes * 576
If we compare that with the object size we should get a relative
overhead of around .2% to 1% for reasonable sized objects,
which framebuffers tend to be.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016150413.11577-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
