Page faults can easily overwhelm the interrupt handler.
So to make sure that we never lose valuable interrupts on the primary ring
we re-route page faults to IH ring 1.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_tiling_mode_table_init’:
./include/linux/device.h:1487:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
_dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:3236:3: note: in expansion of macro ‘dev_warn’
dev_warn(adev->dev,
^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:3240:2: note: here
case CHIP_CARRIZO:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 6 files that return (in bytes):
The total amount of VRAM/visible VRAM/GTT
and the current total used VRAM/visible VRAM/GTT
v2: Split used and total into separate files
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sys interface to set socclk, fclk and dcefclk for smu.
Add feature_mask parameter for smu_upload_dpm_level as socclk, fclk and
dcefclk have dependency, without feature_mask to point out specific clk
will make it fail to set some clk.
Fix the function of smu_unforce_dpm_levels.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Gui Chengming <Jack.Gui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1, set get_pwm1_enable and set_pwm1_enable functions to call
smu_get_fan_control_mode and smu_set_fan_control_mode for SMU11
2, implement set_fan_control_mode function
v2: add return value in set_fan_control_mode function
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unify power stade adjust function into smu_handle_task by the judgment
of task_id.
Move functions which have no relationship with smu version into the file
of amdgpu_smu.
Modified the function of smu_display_config_changed into two part.
Unify some similiar function.
v2: Correct the operation of upload dpm level when force dpm limit value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pp_table sysfs interface for new sw-smu.
get: return pptable raw data
set: write pptable raw data to pptable, then reset smu (hw_fini -> hw_init)
v2: fix mutex lock issue
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/si_dpm.c: In function 'si_program_response_times':
drivers/gpu/drm/amd/amdgpu/si_dpm.c:4101:29: warning:
variable 'backbias_response_time' set but not used [-Wunused-but-set-variable]
It's never used since introduction in 841686df9f ("drm/amdgpu: add SI DPM
support (v4)"), so can be removed
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c: In function 'update_gpuvm_pte':
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:840:20: warning:
variable 'bo' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:838:20: warning:
variable 'vm' set but not used [-Wunused-but-set-variable]
They're never used since introduction in a46a2cd103 ("drm/amdgpu: Add GPUVM
memory management functions for KFD")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is recommended by HW designers. Previously when it was set to 1,
the PDE walk error in VM fault will be treated as
PERMISSION_OR_INVALID_PAGE_FAULT rather than usually expected OTHER_FAULT.
As a result, the retry control in VM_CONTEXT*_CNTL will change accordingly.
The above behavior is kind of abnormal. Furthermore, the
PDE_FAULT_CLASSIFICATION == 1 feature was targeted for very old ASICs
and it never made it way to production. Therefore, we should set it to 0.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All the gmc_*_set_pde_pte functions are the same across different ASICs,
so we can eliminate the set_pde_pte function pointer and instead use a
generic function.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A BO's address has to be at least the minimum offset. Sharing this
test in ttm_bo_mmap() removes code from drivers. A full buffer-address
validation is still done within drm_vma_offset_lockup_locked().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most TTM drivers define the constant DRM_FILE_PAGE_OFFSET of the same
value. The only exception is vboxvideo, which is being converted to the
new offset by this patch. Unifying the constants in a single place
simplifies the driver code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only select HMM_MIRROR will get kernel config dependency warnings
if CONFIG_HMM is missing in the config. Add depends on HMM will
solve the issue.
Add conditional compilation to fix compilation errors if HMM_MIRROR
is not enabled as HMM config is not enabled.
Remove unused function amdgpu_ttm_tt_mark_user_pages.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use HMM helper function hmm_vma_fault() to get physical pages backing
userptr and start CPU page table update track of those pages. Then use
hmm_vma_range_done() to check if those pages are updated before
amdgpu_cs_submit for gfx or before user queues are resumed for kfd.
If userptr pages are updated, for gfx, amdgpu_cs_ioctl will restart
from scratch, for kfd, restore worker is rescheduled to retry.
HMM simplify the CPU page table concurrent update check, so remove
guptasklock, mmu_invalidations, last_set_pages fields from
amdgpu_ttm_tt struct.
HMM does not pin the page (increase page ref count), so remove related
operations like release_pages(), put_page(), mark_page_dirty().
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace our MMU notifier with hmm_mirror_ops.sync_cpu_device_pagetables
callback. Enable CONFIG_HMM and CONFIG_HMM_MIRROR as a dependency in
DRM_AMDGPU_USERPTR Kconfig.
It supports both KFD userptr and gfx userptr paths.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
