[Why & How]
Fix the instatiation sequence for MPC registers and add a few other
missing register definitions that were ommited erroneously when copying
them over to enable runtime initialization of reigster offsets for
DCN32/321
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Kernel does not have a means to tell the userspace to use software
cursor. Due to lack of this functionality, reducing the max cursor size
is the only way to ensure that power savings of Subview port feature is
utilized for asics that support it. The workaround could be removed
after cursor caching is fixed while a subviewport config is active.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In some cases the viewport position of the main pipes can change without
triggering a full update. In this case the subvp phantom viewports must
be updated accordingly.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When calculating cursor size for MALL allocation, the cursor width should
be the actual width rounded up to 64 alignment. Additionally, the bit
depth should vary depending on color format.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Leverage SW cursor fall back for SubVP when the cursor is too big. We
want to take advantage of being able to fallback to SW cursor when
possible because it's not worth it to disable MCLK switching because the
cursor is slightly too big.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
I2C register name starts with 1, unlike other registers that start with
0. This creates a problem with the new register macro refactoring when
I2C HW objects are created in an array.
[How]
Correct I2C register offset by making a new macro to account for array
offset.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
plane and stream variables used for cursor size allocation calculation
were stale from previous iteration. Redo the iteration to find the
correct cursor plane for the calculation.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This reverts commit e6cf22ef5f since it
causes a SubVP related regression: "Switching between windowed video and
fullscreen can intermittently cause black screen"
Fixes: e6cf22ef5f ("drm/amd/display: program k1/k2 divider for virtual signal for DCN32")
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When using a 4k monitor when cursor caching is not supported due to
framebuffer being on an uncacheable address, enabling display refresh
from MALL would trigger corruption if SS is enabled.
Prevent entering SS if we are on the edge case and cursor caching is not
possible. Do this only if cursor size larger than a 64x64@4bpp. Pull the
cursor size calculation out of if condition since cursor address may not
be set on all platforms
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In some cases, there are calls to transition from TX_ON to TX_ON, such as
when using MST or during resolution change. This is expected, so allow HW
programming to continue.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In some cases, there are calls to transition from TX_ON to TX_ON. This is
expected, so do not assert. However, these are redundant, so return
prematurely.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black.
[How]
We need to set dig fifo read start level = 7 before dig fifo reset during dig
fifo enable according to hardware designer's suggestion. If it is zero, it will
cause underflow or overflow and DIG_FIFO_ERROR = 1.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Wang Fudong <Fudong.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Each index in the DPSTREAMCLK_CNTL register
phyiscally maps 1-to-1 with HPO stream encoder
instance. On the other hand, each index in
DTBCLK_P_CNTL physically maps 1-to-1 with OTG
instance.
Current DCN32 DPSTREAMCLK_CLK programing assumes
that OTG instance always maps 1-to-1 with
HPO stream encoder instance. This is not always
guaranteed and can result in blackscreen.
[How]
Program the correct dpstreamclk instance with
the correct dtbclk_p source.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Refcount is incremented on allocation and
when adding to the context. Therefore we must
release the phantom plane and stream after
removing from the context.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When using IGT, kms_bw multi display tests trigger an assert since
we ignore virtual signal type. k1/k2 dividers should be correctly
programmed if VSYNC needs to be correct. Add the appropriate condition
to the if arm to fix this.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC was using compile time initialization of register addresses using
SR_* macros and their variants. These have been converted to use runtime
initialization.
The REG_STRUCT macro is a definition that is added to SR_* macros.
During initialization, this must be defined before SR_* macros are
invoked, which are in turn invoked through various IP initialization macros.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Reprogramming the stream despite no changes in ODM combine mode.
Reprogramming the stream would cause intermittent black screen on
display which could only be recovered through enable/disable sequence.
[HOW]
Fixed bug where we detected a change in ODM combine mode despite ODM
combine mode being disabled. Also removed code which required stream to
be reprogrammed once a change in ODM combine mode was noticed. Lastly we
do not support dynamic ODM switching for HDMI TMDS and FRL on DCN32,
therefore we never want to change its ODM policy.
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When multiple displays are used, the underlying framebuffers could be
two separate framebuffers, or a single large framebuffer. Fix the
calculation logic for CAB to account for large framebuffer. Current
logic assumes that any FB that the plane points to are independent. When
a single FB is used on the system, this does 2 times allocation.
Add a check to prevent duplicate allocation by checking if the base
addresses are the same, and then ensuring that the if we allocate using
the pitch, whole of the other fbs will be accounted for in the first
allocation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:
ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o
This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coding error in DET allocation was resulting in too few DET segments
being allocated, causing underflow.
[How]
Reset pipe count each time we begin iterating through pipes for a stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In single display ODM combine mode, two MPO videos ( three
planes ) are not working
[How]
When we detect three planes, don't set odm combine 2to1 policy
for the MPO planes. Otherwise, we run out of pipes available
Add support for two MPO videos in dc_add_plane_to_context().
Don't allow both videos to be on the same side of the
display.
Add extra check when fetching free pipe for two MPO videos.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For any DRR cases in SubVP, don't lock for VSYNC flips
- For DCN32/321 use FW to do DRR manual trigger programming
- Add bit in SubVP cmd to indicate if the SubVP pipe is DRR
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
