UAPI Changes:
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Document memory residency and Flat-CCS capability of obj (Ramalingam C)
- Disable GETPARAM lookups of I915_PARAM_[SUB]SLICE_MASK on Xe_HP+ (Matt Roper)
Cross-subsystem Changes:
- Rename intel-gtt symbols (Lucas De Marchi)
Core Changes:
Driver Changes:
- Support programming the EU priority in the GuC descriptor (DG2) (Matthew Brost)
- DG2 HuC loading support (Daniele Ceraolo Spurio)
- Fix build error without CONFIG_PM (YueHaibing)
- Enable THP on Icelake and beyond (Tvrtko Ursulin)
- Only setup private tmpfs mount when needed and fix logging (Tvrtko Ursulin)
- Make __guc_reset_context aware of guilty engines (Umesh Nerlige Ramappa)
- DG2 small bar memory probing fixes (Nirmoy Das)
- Remove unnecessary GuC err capture noise (Alan Previn)
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms (Maarten Lankhorst)
- Fix undefined behavior in GuC backend due to shift overflowing the constant (Borislav Petkov)
- New DG2 workarounds (Swathi Dhanavanthri, Anshuman Gupta)
- Report no hwconfig support on ADL-N (Balasubramani Vivekanandan)
- Fix error_state_read ptr + offset use (Alan Previn)
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Fix memory leaks in per-gt sysfs (Ashutosh Dixit)
- Fix dma_resv fence handling in multi-batch execbuf (Nirmoy Das)
- Add extra registers to GPU error dump on Gen11+ (Stuart Summers)
- More PVC+DG2 workarounds (Matt Roper)
- Improve user experience and driver robustness under SIGINT or similar (Tvrtko Ursulin)
- Don't show engine classes not present (Tvrtko Ursulin)
- Improve on suspend / resume time with VT-d enabled (Thomas Hellström)
- Add missing else (katrinzhou)
- Don't leak lmem mapping in vma_evict (Juha-Pekka Heikkila)
- Add smem fallback allocation for dpt (Juha-Pekka Heikkila)
- Tweak the ordering in cpu_write_needs_clflush (Matthew Auld)
- Do not access rq->engine without a reference (Niranjana Vishwanathapura)
- Revert "drm/i915: Hold reference to intel_context over life of i915_request" (Niranjana Vishwanathapura)
- Don't update engine busyness stats too frequently (Alan Previn)
- Add additional steps for Wa_22011802037 for execlist backend (Umesh Nerlige Ramappa)
- Fix a lockdep warning at error capture (Nirmoy Das)
- Ponte Vecchio prep work and new blitter engines (Matt Roper, John Harrison, Lucas De Marchi)
- Read correct RP_STATE_CAP register (PVC) (Matt Roper)
- Define MOCS table for PVC (Ayaz A Siddiqui)
- Driver refactor and support Ponte Vecchio forcewake handling (Matt Roper)
- Remove additional 3D flags from PIPE_CONTROL (Ponte Vecchio) (Stuart Summers)
- XEHPSDV and PVC do not use HuC (Daniele Ceraolo Spurio)
- Extract stepping information from PCI revid (Ponte Vecchio) (Matt Roper)
- Add initial PVC workarounds (Stuart Summers)
- SSEU handling driver refactor and Ponte Vecchio support (Matt Roper)
- GuC depriv applies to PVC (Matt Roper)
- Add register steering (Ponte Vecchio) (Matt Roper)
- Add recommended MMIO setting (Ponte Vecchio) (Matt Roper)
- Move multicast register handling to a dedicated file (Matt Roper)
- Cleanup interface for MCR operations (Matt Roper)
- Extend i915_vma_pin_iomap() (CQ Tang)
- Re-do the intel-gtt split (Lucas De Marchi)
- Correct duplicated/misplaced GT register definitions (Matt Roper)
- Prefer "XEHP_" prefix for registers (Matt Roper)
- Don't use DRM_DEBUG_WARN_ON for unexpected l3bank/mslice config (Tvrtko Ursulin)
- Don't use DRM_DEBUG_WARN_ON for ring unexpectedly not idle (Tvrtko Ursulin)
- Make drop_pages() return bool (Lucas De Marchi)
- Fix CFI violation with show_dynamic_id() (Nathan Chancellor)
- Use i915_probe_error instead of drm_error in GuC code (Vinay Belgaumkar)
- Fix use of static in macro mismatch (Andi Shyti)
- Update tiled blits selftest (Bommu Krishnaiah)
- Future-proof platform checks (Matt Roper)
- Only include what's needed (Jani Nikula)
- remove accidental static from a local variable (Jani Nikula)
- Add global forcewake request to drpc (Vinay Belgaumkar)
- Fix spelling typo in comment (pengfuyuan)
- Increase timeout for live_parallel_switch selftest (Akeem G Abodunrin)
- Use non-blocking H2G for waitboost (Vinay Belgaumkar)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrwtLM081SQUG1Dc@tursulin-desk
drm/i915 feature pull #2 for v5.19:
Features and functionality:
- Add first set of DG2 PCI IDs for "motherboard down" designs (Matt Roper)
- Add initial RPL-P PCI IDs as ADL-P subplatform (Matt Atwood)
Refactoring and cleanups:
- Power well refactoring and cleanup (Imre)
- GVT-g refactor and mdev API cleanup (Christoph, Jason, Zhi)
- DPLL refactoring and cleanup (Ville)
- VBT panel specific data parsing cleanup (Ville)
- Use drm_mode_init() for on-stack modes (Ville)
Fixes:
- Fix PSR state pipe A/B confusion by clearing more state on disable (José)
- Fix FIFO underruns caused by not taking DRAM channel into account (Vinod)
- Fix FBC flicker on display 11+ by enabling a workaround (José)
- Fix VBT seamless DRRS min refresh rate check (Ville)
- Fix panel type assumption on bogus VBT data (Ville)
- Fix panel data parsing for VBT that misses panel data pointers block (Ville)
- Fix spurious AUX timeout/hotplug handling on LTTPR links (Imre)
Merges:
- Backmerge drm-next (Jani)
- GVT changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87bkwbkkdo.fsf@intel.com
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sync up with v5.18-rc1, in particular to get 5e3094cfd9
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Accessing the DDI_BUF_CTL register without the port's DDI clock being
enabled (to set/clear the TypeC PHY ownership for the port) can lead to
a corrupted value read during any i915 register access right after the
DDI clock is enabled.
The root cause is the way clock synchronization works for this register,
controlled by the CHICKEN_DCPR_1 DDI_CLOCK_REG_ACCESS flag. Correctly
this flag should be cleared on ADLP (see the Bspec link below), however
after bootup the flag is set.
One easily reproducible issue is an unclaimed register access of the
PWR_WELL_CTL_DDI2 register, programmed right after DDI clock enabling to
enable the port's DDI_IO power well (see the HSDES, VLK links below).
With the correct setting above this problem can't be reproduced.
Bspec: 49189
HSDES: 18019028154
VLK: 28328, 28655
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Arthur J Runyan <arthur.j.runyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323201749.288566-1-imre.deak@intel.com
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
Throttling here refers to the GT frequency being clipped. Each of
the throttle reason attributes will have a 0 or 1 value depending
upon whether there is throttling and also the specific reason for
it.
The following is a brief description of the sysfs throttle
frequency attributes added:
- throttle_reason_status: when set indicates that there is GT
frequency clipping.
- throttle_reason_pl1: when set indicates that PBM PL1 (platform
or package PL1) has caused GT frequency clipping.
- throttle_reason_pl2: when set indicates that PBM PL2 or PL3
(platform or package PL2 or PL3) has caused GT frequency
clipping.
- throttle_reason_pl4: when set indicates that PL4 or IccMax has
caused GT frequency clipping.
- throttle_reason_thermal: when set indicates that Thermal event
has caused GT frequency clipping.
- throttle_reason_prochot: when set indicates that PROCHOT# has
caused GT frequency clipping.
- throttle_reason_ratl: when set indicates that Running Average
Thermal Limit has caused GT frequency clipping.
- throttle_reason_vr_thermalert: when set indicates that Hot VR
(any processor VR) has caused GT frequency clipping.
- throttle_reason_vr_tdc: when set indicates that VR TDC
(Thermal Design Current) has caused GT frequency clipping.
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Dale B Stimson <dale.b.stimson@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-8-andi.shyti@linux.intel.com
Currently we are observing occasional screen flickering when
PSR2 selective fetch is enabled. More specifically glitch seems
to happen on full frame update when cursor moves to coords
x = -1 or y = -1.
According to Bspec SF Single full frame should not be set if
SF Partial Frame Enable is not set. This happened to be true for
ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's
actually "SF Partial Frame Enable" (Bit 31).
Setting "SF Partial Frame Enable" bit also on full update seems to
fix screen flickering.
Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE
only if not on ADL_P. Bit 31 has different meaning in ADL_P.
Bspec: 49274
v2: Fix Mihai Harpau email address
v3: Modify commit message and remove unnecessary comment
Tested-by: Lyude Paul <lyude@redhat.com>
Fixes: 7f6002e580 ("drm/i915/display: Enable PSR2 selective fetch by default")
Reported-by: Lyude Paul <lyude@redhat.com>
Cc: Mihai Harpau <mharpau@gmail.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com
(cherry picked from commit 8d5516d18b)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Currently we are observing occasional screen flickering when
PSR2 selective fetch is enabled. More specifically glitch seems
to happen on full frame update when cursor moves to coords
x = -1 or y = -1.
According to Bspec SF Single full frame should not be set if
SF Partial Frame Enable is not set. This happened to be true for
ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's
actually "SF Partial Frame Enable" (Bit 31).
Setting "SF Partial Frame Enable" bit also on full update seems to
fix screen flickering.
Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE
only if not on ADL_P. Bit 31 has different meaning in ADL_P.
Bspec: 49274
v2: Fix Mihai Harpau email address
v3: Modify commit message and remove unnecessary comment
Tested-by: Lyude Paul <lyude@redhat.com>
Fixes: 7f6002e580 ("drm/i915/display: Enable PSR2 selective fetch by default")
Reported-by: Lyude Paul <lyude@redhat.com>
Cc: Mihai Harpau <mharpau@gmail.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com
Tile4 in bspec format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v3: - Rebased patch on top of new changes related to plane_caps.
- Added static assert to check that PLANE_CTL_TILING_YF
matches PLANE_CTL_TILING_4(Nanley Chery)
- Fixed naming and layout description for Tile 4 in drm uapi
header(Nanley Chery)
v4: - Extracted drm_fourcc changes to separate patch(Nanley Chery)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118115544.15116-3-stanislav.lisovskiy@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
In the past we had a need to differentiate TGL U and TGL Y, there
was a different voltage swing table for each subplatform and some PCI
ids of this subplatforms are shared but it turned out that it was a
specification mistake and the voltage swing table was indeed the same
but we went ahead with that patch because we needed to differentiate
TGL U and Y from TGL H and by that time TGL H was embargoed so that
was the perfect way to land it upstream.
Now the embargo for TGL H is long past and now we even have
INTEL_TGL_12_GT1_IDS with all TGL H ids, so we can drop this PCI root
check and only rely in the PCI ids to differentiate TGL U and Y from
TGL H that actually has code differences.
Besides the simplification this will fix issues in virtualization
environments where the PCI root is virtualized and don't have the same
id as actual hardware.
v2:
- add and set INTEL_SUBPLATFORM_UY
Cc: Fred Gao <fred.gao@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222141424.35165-1-jose.souza@intel.com
