Commit 52d11c863a ("drm/rockchip: lvds: do not print scary message when
probing defer") already started hiding scary messages that are not relevant
if the requested supply just returned EPROBE_DEFER, but there are more
possible sources - like the phy.
So modernize the whole logging in the probe path by replacing the
remaining deprecated DRM_DEV_ERROR with appropriate dev_err(_probe)
and drm_err calls.
The distinction here is that all messages talking about mishaps of the
lvds element use dev_err(_probe) while messages caused by interaction
with the main Rockchip drm-device use drm_err.
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304124418.111061-3-heiko@sntech.de
The LVDS block needs a separate pclk only on some socs, so currently
requests and prepares it in the soc-specific probe function, but common
code is required to unprepare it in the error path or on driver remove.
While this works because clk_unprepare just does nothing if clk is NULL,
this mismatch of who is responsible still is not very nice.
The clock-framework already has a helper for clk-get-and-prepare even
with devres support in devm_clk_get_prepared().
This will get and prepare the clock and also unprepare it on driver
removal, saving the driver from having to handle it "manually".
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304124418.111061-2-heiko@sntech.de
When the drm-driver probes, it mainly creates the component device, where
all the sub-drivers (vops, hdmi, etc) hook into.
This will cause the shutdown handler to get called on shutdown, even
though the drm-device might not have been set up, or the component bind
might have failed.
So use the new component helper to check whether the drm-device is up
and only then call the drm-atomic helper to release all the drm magic.
This prevents failures when the drm-device is never set, or has been
freed up already for example by a probe-defer during the component bind.
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220234141.2788785-3-heiko@sntech.de
Replace drm_err() calls in vop2_bind() and vop2_create_crtcs() with
dev_err_probe(), to simplify error handling and improve consistency.
Additionally, ensure the already existing dev_err_probe() invocations
pass drm->dev instead of dev as their first argument, so that we get the
actual reason in case of -EPROBE_DEFER errors:
platform display-subsystem: deferred probe pending: (reason unknown)
vs.
platform display-subsystem: deferred probe pending: rockchip-drm: <actual reason>
While at it, add the missing '\n' to some of the message strings.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250223-vop2-hdmi1-disp-modes-v2-2-f4cec5e06fbe@collabora.com
The RK3588 specific implementation is currently quite limited in terms
of handling the full range of display modes supported by the connected
screens, e.g. 2560x1440@75Hz, 2048x1152@60Hz, 1024x768@60Hz are just a
few of them.
Additionally, it doesn't cope well with non-integer refresh rates like
59.94, 29.97, 23.98, etc.
Make use of HDMI1 PHY PLL as a more accurate DCLK source to handle
all display modes up to 4K@60Hz.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250223-vop2-hdmi1-disp-modes-v2-1-f4cec5e06fbe@collabora.com
Currently, DRM atomic uAPI allows only primary planes to be flipped
asynchronously. However, each driver might be able to perform async
flips in other different plane types. To enable drivers to set their own
restrictions on which type of plane they can or cannot flip, use the
existing atomic_async_check() from struct drm_plane_helper_funcs to
enhance this flexibility, thus allowing different plane types to be able
to do async flips as well.
Create a new parameter for the atomic_async_check(), `bool flip`. This
parameter is used to distinguish when this function is being called from
a plane update from a full page flip.
In order to prevent regressions and such, we keep the current policy: we
skip the driver check for the primary plane, because it is always
allowed to do async flips on it.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Christopher Snowhill <chris@kode54.net>
Tested-by: Christopher Snowhill <chris@kode54.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127-tonyk-async_flip-v12-1-0f7f8a8610d3@igalia.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The RK3588 specific implementation is currently quite limited in terms
of handling the full range of display modes supported by the connected
screens, e.g. 2560x1440@75Hz, 2048x1152@60Hz, 1024x768@60Hz are just a
few of them.
Additionally, it doesn't cope well with non-integer refresh rates like
59.94, 29.97, 23.98, etc.
Make use of HDMI0 PHY PLL as a more accurate DCLK source to handle
all display modes up to 4K@60Hz.
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204-vop2-hdmi0-disp-modes-v3-3-d71c6a196e58@collabora.com
The code that changes hdmi->ref_clk was accidentally copied from
downstream code that sets a different clock. We don't actually
want to set any clock here at all.
Setting this clock incorrectly leads to incorrect timings for
DDC, CEC, and HDCP signal generation.
No Fixes listed, as the theoretical timing error in DDC appears to
still be within tolerances and harmless - and HDCP and CEC are not
yet supported.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217201708.3320673-1-derek.foreman@collabora.com
Every layer of vop2 should bind a window, and we also need to make
sure that this window is not used by other layer.
0x5 is a reserved layer sel value on rk3568, but it will select
Cluster3 on rk3588, configure unused layers to 0x5 will lead
alpha blending error on rk3588.
When we bind a window from layerM to layerN, we move the old window
on layerN to layerM.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-3-andyshrk@163.com
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
