Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".
In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION
network message is used to drive loops over the qr_regions buffer without
sufficient validation. This series fixes two issues:
- Patch 1 adds a bounds check to reject messages where qr_numregions
exceeds O2NM_MAX_REGIONS. The o2net layer only validates message
byte length; it does not constrain field values, so a crafted message
can set qr_numregions up to 255 and trigger out-of-bounds reads past
the 1024-byte qr_regions buffer.
- Patch 2 fixes an off-by-one in the local-vs-remote comparison loop,
which uses '<=' instead of '<', reading one entry past the valid range
even when qr_numregions is within bounds.
This patch (of 2):
The qr_numregions field from a DLM_QUERY_REGION network message is used
directly as loop bounds in dlm_match_regions() without checking against
O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS
(32) entries, a crafted message with qr_numregions > 32 causes
out-of-bounds reads past the qr_regions buffer.
Add a bounds check for qr_numregions before entering the loops.
Link: https://lkml.kernel.org/r/SYBPR01MB7881A334D02ACEE5E0645801AF7BA@SYBPR01MB7881.ausprd01.prod.outlook.com
Link: https://lkml.kernel.org/r/SYBPR01MB788166F524AD04E262E174BEAF7BA@SYBPR01MB7881.ausprd01.prod.outlook.com
Fixes: ea2034416b ("ocfs2/dlm: Add message DLM_QUERY_REGION")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to all the fs subsystem users to
explicitly request the use of the per-CPU behavior. Both flags coexist
for one release cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-4-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 021110 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 84 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190524100844.756442981@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wait for dlm recovery done when migrating all lock resources in case that
new lock resource left after leaving dlm domain. And the left lock
resource will cause other nodes BUG.
NodeA NodeB NodeC
umount:
dlm_unregister_domain()
dlm_migrate_all_locks()
NodeB down
do recovery for NodeB
and collect a new lockres
form other live nodes:
dlm_do_recovery
dlm_remaster_locks
dlm_request_all_locks:
dlm_mig_lockres_handler
dlm_new_lockres
__dlm_insert_lockres
at last NodeA become the
master of the new lockres
and leave domain:
dlm_leave_domain()
mount:
dlm_join_domain()
touch file and request
for the owner of the new
lockres, but all the
other nodes said 'NO',
so NodeC decide to be
the owner, and send do
assert msg to other
nodes:
dlmlock()
dlm_get_lock_resource()
dlm_do_assert_master()
other nodes receive the msg
and found two masters exist.
at last cause BUG in
dlm_assert_master_handler()
-->BUG();
Link: http://lkml.kernel.org/r/5AAA6E25.7090303@huawei.com
Fixes: bc9838c4d4 ("dlm: allow dlm do recovery during shutdown")
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should not handle migrate lockres if we are already in
'DLM_CTXT_IN_SHUTDOWN', as that will cause lockres remains after leaving
dlm domain. At last other nodes will get stuck into infinite loop when
requsting lock from us.
The problem is caused by concurrency umount between nodes. Before
receiveing N1's DLM_BEGIN_EXIT_DOMAIN_MSG, N2 has picked up N1 as the
migrate target. So N2 will continue sending lockres to N1 even though
N1 has left domain.
N1 N2 (owner)
touch file
access the file,
and get pr lock
begin leave domain and
pick up N1 as new owner
begin leave domain and
migrate all lockres done
begin migrate lockres to N1
end leave domain, but
the lockres left
unexpectedly, because
migrate task has passed
[piaojun@huawei.com: v3]
Link: http://lkml.kernel.org/r/5A9CBD19.5020107@huawei.com
Link: http://lkml.kernel.org/r/5A99F028.2090902@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series of patches is to fix the dis-order issue of setting/clearing
refmap bit described below.
Node 1 Node 2(master)
dlmlock
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
dlmlock succeed
dlmunlock succeed
dlm_purge_lockres
dlm_deref_handler
-> find lock resource is in
DLM_LOCK_RES_SETREF_INPROG state,
so dispatch a deref work
dlm_purge_lockres succeed.
call dlmlock again
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
deref work trigger, call
dlm_lockres_clear_refmap_bit
to clear Node 1 from refmap
dlm_purge_lockres succeed
dlm_send_remote_lock_request
return DLM_IVLOCKID because
the lockres is not exist
BUG if the lockres is $RECOVERY
This series of patches add a new message to keep the order of set and
clear. Other nodes can purge the lock resource only after the refmap bit
on master is cleared.
This patch is to add DEREF_DONE message and corresponding handler. Node
can purge the lock resource after receiving this message. As a new
message is added, so increase the minor number of dlm protocol version.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A node can mount multiple ocfs2 volumes. And if thread names are same for
each volume/domain, it will bring inconvenience when analyzing problems
because we have to identify which volume/domain the messages belong to.
Since thread name will be printed to messages, so add volume uuid or dlm
name to thread name can benefit problem analysis.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In dlm_register_domain_handlers, if o2hb_register_callback fails, it
will call dlm_unregister_domain_handlers to unregister. This will
trigger the BUG_ON in o2hb_unregister_callback because hc_magic is 0.
So we should call o2hb_setup_callback to initialize hc first.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following case may lead to o2net_wq and o2hb thread deadlock on
o2hb_callback_sem.
Currently there are 2 nodes say N1, N2 in the cluster. And N2 down, at
the same time, N3 tries to join the cluster. So N1 will handle node
down (N2) and join (N3) simultaneously.
o2hb o2net_wq
->o2hb_do_disk_heartbeat
->o2hb_check_slot
->o2hb_run_event_list
->o2hb_fire_callbacks
->down_write(&o2hb_callback_sem)
->o2net_hb_node_down_cb
->flush_workqueue(o2net_wq)
->o2net_process_message
->dlm_query_join_handler
->o2hb_check_node_heartbeating
->o2hb_fill_node_map
->down_read(&o2hb_callback_sem)
No need to take o2hb_callback_sem in dlm_query_join_handler,
o2hb_live_lock is enough to protect live node map.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: xMark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: jiangyiwen <jiangyiwen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We found a race situation when dlm recovery and node joining occurs
simultaneously if the network state is bad.
N1 N4
start joining dlm and send
query join to all live nodes
set joining node to N1, return OK
send query join to other
live nodes and it may take
a while
call dlm_send_join_assert()
to send assert join message
when N2 is down, so keep
trying to send message to N2
until find N2 is down
send assert join message to
N3, but connection is down
with N3, so it may take a
while
become the recovery master for N2
and send begin reco message to other
nodes in domain map but no N1
connection with N3 is rebuild,
then send assert join to N4
call dlm_assert_joined_handler(),
add N1 to domain_map
dlm recovery done, send finalize message
to nodes in domain map, including N1
receiving finalize message,
trigger the BUG() because
recovery master mismatch.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When mounting an ocfs2 volume, it will firstly generate a file
/sys/kernel/debug/o2dlm/<uuid>/dlm_state, and then launch the dlm thread.
So the following situation will cause a null pointer dereference.
dlm_debug_init -> access file dlm_state which will call dlm_state_print ->
dlm_launch_thread
Move dlm_debug_init after dlm_launch_thread and dlm_launch_recovery_thread
can fix this issue.
Signed-off-by: Zongxun Wang <wangzongxun@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The versioning information is confusing for end-users. The numbers are
stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the
versioning system in the OCFS2 modules and let the kernel version be the
guide to debug issues.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[dan.carpenter@oracle.com: fix up some NULL dereference bugs]
Signed-off-by: Dong Fang <yp.fangdong@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cluster up check only checks to see if the node is heartbeating or not.
If yes it continues assuming that the node is connected to all the nodes. But
if that is not the case, the cluster join aborts with a stack of errors that
are not easy to comprehend.
This patch adds the network connect check upfront and prints the nodes that
the node is not yet connected to, before aborting.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
During dlm domain shutdown, o2dlm has to free all the lock resources. Ones that
have no locks and references are freed. Ones that have locks and/or references
are migrated to another node.
The first task in migration is finding a target. Currently we scan the lock
resource and find one node that either has a lock or a reference. This is not
very efficient in a parallel umount case as we might end up migrating the
lock resource to a node which itself may have to migrate it to a third node.
The patch scans the dlm->exit_domain_map to ensure the target node is not
leaving the domain. If no valid target node is found, o2dlm does not migrate
the resource but instead waits for the unlock and deref messages that will
allow it to free the resource.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
This patch adds a new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG and ups the dlm
protocol to 1.2.
o2dlm sends this new message in dlm_unregister_domain() to mark the beginning
of the exit domain. This message is sent to all nodes in the domain.
Currently o2dlm has no way of informing other nodes of its impending exit.
This information is useful as the other nodes could disregard the exiting
node in certain operations. For example, in resource migration. If two or
more nodes were umounting in parallel, it would be more efficient if o2dlm
were to choose a non-exiting node to be the new master node rather than an
exiting one.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch fixes a bug in the o2dlm protocol negotiation in that it is using
the builtin version rather than the negotiated version during the domain
join. This causes join errors when a node having kernel >= 2.6.37 joins
a cluster with nodes having kernels < 2.6.37.
This only affects the o2cb cluster stack.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reported-by: Jacek Stepniewski <Jacek.Stepniewski@agora.pl>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
