Pull arm64 updates from Catalin Marinas:
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits)
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
arm64: replace in_irq() with in_hardirq()
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
...
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
Oded writes:
This tag contains habanalabs driver changes for v5.15:
- Add a new uAPI (under the cs ioctl) to enable to user to reserve
signals and signal them from within its workloads, while the driver
performs the waiting. This allows finer granularity of pipelining
between the different engines and resource utilization.
- Add a new uAPI (under the wait_for_cs ioctl) to allow waiting
on multiple command submissions (workloads) at the same time. This
is an optimization for the user process so it won't need to call
multiple times to the wait_for_cs ioctl.
- Add new feature of "state dump", which can be triggered through new
debugfs node. This is a similar concept to the kernel panic dump.
This new mechanism retrieves information from the device in case
one of the workloads that was sent by the user got stuck. This is
very helpful for debugging the hang.
- Add a new debugfs node to perform lookup of user pointers that are
mapped to habana device's pmmu.
- Fix to the tracking of user process when running inside a container.
- Allow user to map more than 4GB of memory to the device MMU in single
IOCTL call.
- Minimize number of register reads done in GAUDI during user operation.
- Allow user to retrieve the device's server type that the device is
connected to.
- Several fixes to the code of waiting on interrupts on behalf of the
user.
- Fixes and improvements to the hint mechanism in our VA allocation.
- Update the firmware header files to the latest version while
maintaining backward compatibility with older firmware versions.
- Multiple fixes to various bugs.
* tag 'misc-habanalabs-next-2021-09-01' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (61 commits)
habanalabs/gaudi: hwmon default card name
habanalabs: add support for f/w reset
habanalabs/gaudi: block ICACHE_BASE_ADDERESS_HIGH in TPC
habanalabs: cannot sleep while holding spinlock
habanalabs: never copy_from_user inside spinlock
habanalabs: remove unnecessary device status check
habanalabs: disable IRQ in user interrupts spinlock
habanalabs: add "in device creation" status
habanalabs/gaudi: invalidate PMMU mem cache on init
habanalabs/gaudi: size should be printed in decimal
habanalabs/gaudi: define DC POWER for secured PMC
habanalabs/gaudi: unmask out of bounds SLM access interrupt
habanalabs: add userptr_lookup node in debugfs
habanalabs/gaudi: fetch TPC/MME ECC errors from F/W
habanalabs: modify multi-CS to wait on stream masters
habanalabs/gaudi: add monitored SOBs to state dump
habanalabs/gaudi: restore user registers when context opens
habanalabs/gaudi: increase boot fit timeout
habanalabs: update to latest firmware headers
habanalabs/gaudi: minimize number of register reads
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a
number of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: isp1760: otg control register access
usb: isp1760: use the right irq status bit
usb: isp1760: write to status and address register
usb: isp1760: fix qtd fill length
usb: isp1760: fix memory pool initialization
usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"
usb: dwc2: Fix spelling mistake "was't" -> "wasn't"
usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"
usb: host: xhci-rcar: Don't reload firmware after the completion
usb: xhci-mtk: allow bandwidth table rollover
usb: mtu3: fix random remote wakeup
usb: mtu3: return successful suspend status
usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
usb: xhci-mtk: modify the SOF/ITP interval for mt8195
usb: xhci-mtk: add a member of num_esit
usb: xhci-mtk: check boundary before check tt
usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
usb: xhci-mtk: fix issue of out-of-bounds array access
usb: xhci-mtk: support option to disable usb2 ports
usb: xhci-mtk: fix use-after-free of mtk->hcd
...
Pull IIO and staging driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had
been maintained out-of-tree by Larry with the end goal of actually
being able to get this driver out of staging eventually. Despite that
driver being "newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to
see, that is why there are additions to the mfc and misc driver
subsystems. All of these were acked by the various subsystem
maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
[ Note: the r8188eu merge clashed with commit 89939e8906 ("staging:
rtlwifi: use siocdevprivate") from the networking tree. When resolving
the issue, I noted that the whole r8188eu rtw_android code is dead
since commit ae7471cae0 ("staging: r8188eu: remove rtw_ioctl
function").
End result: the merge resolution was to throw all of that away,
rather than do the mindless fixup to code that isn't actually
reachable - Linus ]
* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
staging: vt6655: Remove filenames in files
staging: r8188eu: add extra TODO entries
staging: vt6656: Remove filenames in files
staging: wlan-ng: fix invalid assignment warning
staging: r8188eu: rename fields of struct rtl_ps
staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
staging: r8188eu: rename fields of struct dyn_primary_cca
staging: r8188eu: rename struct field Wifi_Error_Status
staging: r8188eu: Provide a TODO file for this driver
staging: r8188eu: remove unneeded variable
staging: r8188eu: remove unneeded conversions to bool
staging: r8188eu: remove {read,write}_macreg
staging: r8188eu: core: remove condition with no effect
staging: r8188eu: remove ethernet.h header file
staging: r8188eu: remove ip.h header file
staging: r8188eu: remove if_ether.h header file
staging: r8188eu: make rtw_deinit_intf_priv return void
staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
...
It is useful to have the ability to see which user address was pinned
to which physical address during the initial mapping. We already have
all that info stored, but no means to search this data (which may be
quite large).
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20210730,
clean up the ACPI companion binding code, optimize the I2C handling in
the XPower PMIC driver, add 16550-compatible Serial Port Subtype
support to the SPCR parsing code, add a few LoongArch support bits,
add a ne quirk to the button driver, add new PCH FIVR methods to the
DPTF code, replace deprecated CPU-hotplug functions in the processor
driver, improve the acpi_os_map_memory() handling on non-x86 and do
some assorted cleanups.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20210730
including the following changes:
- Add support for the AEST table (data compiler) to iASL (Bob
Moore)
- Fix an if statement (add parens) (Bob Moore)
- Drop trailing semicolon from some macros (Bob Moore)
- Fix compilation of WPBT table with no command-line arguments in
iASL (Bob Moore)
- Add method name "_DIS" for use with aslmethod.c (Bob Moore)
- Add new DBG2 Serial Port Subtypes (Marcin Wojtas)
- Add new PCH FIVR methods to the DPTF code (Srinivas Pandruvada)
- Add support for the new 16550-compatible Serial Port Subtype to the
SPCR table parsing code (Marcin Wojtas)
- Add DMI quirk for Lenovo Yoga 9 (14INTL5) to the ACPI button driver
(Ulrich Huber)
- Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA (Huacai Chen)
- Add memory semantics to acpi_os_map_memory() (Lorenzo Pieralisi)
- Replace deprecated CPU-hotplug functions in the ACPI processor
driver (Sebastian Andrzej Siewior)
- Optimize I2C-bus handling in the XPower PMIC driver (Hans de Goede)
- Make platform-profile catch profile changes initiated by user space
and notify user processes of them (Hans de Goede)
- Clean up the ACPI companion binding and unbinding code and update
debug messaging in the ACPI power resources code (Rafael Wysocki)
- Clean up a couple of code pieces related to configfs (Andy
Shevchenko)
- Rearrange the FPDT table parsing code to avoid printing warning
messages for reserved record types (Adrian Huang)"
* tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
ACPI: power: Drop name from struct acpi_power_resource
ACPI: power: Use acpi_handle_debug() to print debug messages
ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
ACPI: button: Add DMI quirk for Lenovo Yoga 9 (14INTL5)
ACPI: Add memory semantics to acpi_os_map_memory()
ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype
ACPI: platform-profile: call sysfs_notify() from platform_profile_store()
ACPICA: Update version to 20210730
ACPICA: Add method name "_DIS" For use with aslmethod.c
ACPICA: iASL: Fix for WPBT table with no command-line arguments
ACPICA: Headers: Add new DBG2 Serial Port Subtypes
ACPICA: Macros should not use a trailing semicolon
ACPICA: Fix an if statement (add parens)
ACPICA: iASL: Add support for the AEST table (data compiler)
ACPI: processor: Replace deprecated CPU-hotplug functions
ACPI: DPTF: Add new PCH FIVR methods
ACPI: configfs: Make get_header() to return error pointer
ACPI: configfs: Use sysfs_emit() in "show" functions
driver core: Split device_platform_notify()
software nodes: Split software_node_notify()
...
* tip/sched/arm64: (785 commits)
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system
arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0
arm64: Implement task_cpu_possible_mask()
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
Linux 5.14-rc6
lib: use PFN_PHYS() in devmem_is_allowed()
...
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
* acpi-dptf:
ACPI: DPTF: Add new PCH FIVR methods
* acpi-processor:
ACPI: processor: Replace deprecated CPU-hotplug functions
* acpi-tables:
ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype
* acpi-platform:
ACPI: platform-profile: call sysfs_notify() from platform_profile_store()
To improve the user's ability to debug the case where a workload that
is part of executing training/inference of a topology is getting stuck,
we need to add a 'core dump' each time a CS times-out. The 'core dump'
shall contain all relevant Sync Manager information and corresponding
fence values.
The most recent dumps shall be accessible via debugfs, under
'state_dump' node. Reading from the node will provide the oldest dump
available. Writing an integer value X will discard X dumps, starting
with the oldest one, i.e. subsequent read will now return newer
dumps.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Dynamic BIOS SAR driver exposing dynamic SAR information from BIOS
The Dynamic SAR (Specific Absorption Rate) driver uses ACPI DSM
(Device Specific Method) to communicate with BIOS and retrieve
dynamic SAR information and change notifications. The driver uses
sysfs to expose this data to userspace via read and notify.
Sysfs interface is documented in detail under:
Documentation/ABI/testing/sysfs-driver-intc_sar
Signed-off-by: Shravan S <s.shravan@intel.com>
Link: https://lore.kernel.org/r/20210723211452.27995-2-s.shravan@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The sysfs interface for default domain types exists primarily so users
can choose the performance/security tradeoff relevant to their own
workload. As such, the choice between the policies for DMA domains fits
perfectly as an additional point on that scale - downgrading a
particular device from a strict default to non-strict may be enough to
let it reach the desired level of performance, while still retaining
more peace of mind than with a wide-open identity domain. Now that we've
abstracted non-strict mode as a distinct type of DMA domain, allow it to
be chosen through the user interface as well.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0e08da5ed4069fd3473cfbadda758ca983becdbf.1628682049.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Don't leave a blank line, to keep the style consistent
with other node descriptions.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
While users can restrict the accepted hash algorithms for the
security.ima xattr file signature when appraising said file, users
cannot restrict the algorithms that can be set on that attribute:
any algorithm built in the kernel is accepted on a write.
Define a new value for the ima policy option 'func' that restricts
globally the hash algorithms accepted when writing the security.ima
xattr.
When a policy contains a rule of the form
appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
only values corresponding to one of these three digest algorithms
will be accepted for writing the security.ima xattr. Attempting to
write the attribute using another algorithm (or "free-form" data)
will be denied with an audit log message. In the absence of such a
policy rule, the default is still to only accept hash algorithms
built in the kernel (with all the limitations that entails).
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel has the ability to restrict the set of hash algorithms it
accepts for the security.ima xattr when it appraises files.
Define a new IMA policy rule option "appraise_algos=", using the
mentioned mechanism to expose a user-toggable policy knob to opt-in
to that restriction and select the desired set of algorithms that
must be accepted.
When a policy rule uses the 'appraise_algos' option, appraisal of a
file referenced by that rule will now fail if the digest algorithm
employed to hash the file was not one of those explicitly listed in
the option. In its absence, any hash algorithm compiled in the
kernel will be accepted.
For example, on a system where SELinux is properly deployed, the rule
appraise func=BPRM_CHECK obj_type=iptables_exec_t \
appraise_algos=sha256,sha384
will block the execution of iptables if the xattr security.ima of its
executables were not hashed with either sha256 or sha384.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Drivers like thinkpad_acpi and ideapad_laptop call the
platform_profile_notify() helper when the profile is changed by hardware
(the embedded-controller/EC) in response to an EC handled hotkey.
This allows userspace to monitor for such changes by polling for POLLPRI
on the platform_profile sysfs file. But the profile can also be changed
underneath a userspace program monitoring it by anonther userspace program
storing a new value.
Add a sysfs_notify() call to platform_profile_store(), so that userspace
programs monitoring for changes also get notified in this case.
Also update the documentation to document that POLLPRI polling can be
used to watch for changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jonathan writes:
First set of new IIO and counter device support, cleanups and features for 5.15
Usual mix of cleanups and new device support.
Counter
======
Cleanups and refactoring:
* treewide
- Ensure attempts to set invalid modes result in -EINVAL return.
- Rename counter_count_function to counter_function as the middle count
is redundant.
- Standardize error returns when limits are exceeded.
* 104-quad:
- Document the lock.
- Return an error if attempt to set the ceiling value in a mode that
doesn't support it.
* intel-qep
- Drop unused bitops.h include
IIO
===
New device support
* bma255
- Add support fo the bosch,bmc156_accel which oddly only exposes the INT2
interrupt pin and not INT1. Patch set includes enabling use of INT2.
* ingenic_adc
- Add support for JZ4760 and similar and update bindings
- Add support for JZ4760B and update bindings
* rockchip_saradc
- Add support for rk3568 ADC (separate channel array as more channels)
* sgp40 gas sensor used to measure air quality
- New driver including binding and ABI documentation.
Bindings
--------
* Add missing bindings for many DACs where the binding was effectively
implicit due to fallback probe methods in I2C and SPI.
adi,ad5064
adi,ad5360
adi,ad5380
adi,ad5421
adi,ad5449
adi,ad5504
adi,ad5624r
adi,ad5686 / adi,ad5696
adi,ad5761
adi,ad5764
adi,ad5791
adi,ad8801
capella,cm3323 (also add explicit of_device_id table)
microchip,mcp4922
* bosch,bma255
- Interrupt type in example was opposite of what the device expects.
It's possible that a particular board had an inverter, but we
definitely don't want the example to suggest this would be normal.
- Add interrupt-names to allow for cases where only INT2 is connected.
- Sort compatibles
- Merge in very similar bosch,bma180 binding.
New feature
-----------
* Devices only allowed to provide either extended_name or a label for given
channel. If extend_name is used (generally discouraged but can't be
removed as it would be a userspaece ABI change), then the label sysfs
attribute will provide the extended_name. This allows some userspace
parser simplications and hardening.
* hid-sensors-pres
- Add a timestamp channel (either from hardware, or locally filled).
* vcnl3020
- Add periodic sensor mode used to provide IIO events.
Cleanups / minor fixes
----------------------
* core/buffers
- Avoid unnecessary zeroing of bitmaps that are immediately overwritten.
- Move a sanity check earlier to simplify error path.
* Quite a few cases of refactors to use devm_* for all of probe and drop
remove
- adjd_s311
- adxl345
- bma220
- da280
- dmard10
- ds311
- max5481
- max5821
- rfd77402
- tcs3414
- tmp006
* ad5624r
- Fix incorrect handling of a regulator that was preventing use of
internal regulators.
* adjd_s311
- Allocate a buffer as part of iio_priv() structure as maximum size
is small enough, no significant advantage in making it flexible sized.
* bma220
- Make handling of suspend and resume closer to the probe() wrt to the
rather odd interface, that suspend mode is entered by reading a register.
* ep93xx
- Prepare clock before using (part of conversion to CCF)
* fsl-imx25-gcq
- Use local device pointer.
- Adjust handling of platform_get_irq() to not check for 0 as an error.
The function is documented as never returning it.
* hid-sensors
- Use devm_kmemdup() consistently across all drivers to simplify channel
structure allocation management.
* meson-saradc
- Drop BL30 integration on G12A and newer SoCs as not used.
- Whitespace fixes.
* mpu6050
- Add per device type startup times. This avoids an issue with having
to dsicard initial data from gyroscopes when they were still stabilizing.
* rfd77402
- Change from passing private data, to passing i2c_client where only
that is needed, reducing back and forth in pm functions.
* si1145
- Drop pointless continue
* st-sensors
- Cleanup of includes to remove unused and add missing headers that are used.
- Use some devm functions to simplify probe() and remove() - gets us part way
towards a fully device managed driver.
* sx9310
- Switch from of to generic properties to enable ACPI bindings.
* vcnl3020
- Add DMA safe buffer for bulk transfers.
- Drop use of iio_claim_direct() in a driver that has no mode changes.
A local lock is more appropriate.
* tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (77 commits)
counter: 104-quad-8: Describe member 'lock' in 'quad8'
iio: hid-sensor-press: Add timestamp channel
counter: Rename counter_count_function to counter_function
counter: Rename counter_signal_value to counter_signal_level
counter: Standardize to ERANGE for limit exceeded errors
counter: Return error code on invalid modes
counter: 104-quad-8: Return error when invalid mode during ceiling_write
iio: accel: bmc150: Add support for BMC156
iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
dt-bindings: iio: accel: bma255: Add interrupt-names
iio: light: cm3323: Add of_device_id table
dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor
iio: chemical: Add driver support for sgp40
dt-bindings: iio: chemical: Add trivial DT binding for sgp40
iio: ep93xx: Prepare clock before using it
iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify code
iio: dac: max5821: convert device register to device managed function
dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
iio/adc: ingenic: add JZ4760B support to the sadc driver
...
sgp40 is a gas sensor used for measuring the air quality.
This driver is reading the raw resistance value which can be passed to
an userspace algorithm for further calculation.
The raw value is also used to calculate an estimated absolute voc index
in the range from 0 to 500. For this purpose the raw_mean value of the
resistance for which the index value is 250 might be set up as a
calibration step. This can be done with in_resistance_calibbias.
Compensation of relative humidity and temperature is supported and can
be used by writing to output values of out_humidityrelative_raw and
out_temp_raw.
There is a predecesor sensor type (sgp30) already existing. This driver
module was not extended because the new sensor is quite different in its
i2c telegrams.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210804154641.GA3237@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
General Electric Healthcare's PPD has a secondary processor from
NXP's Kinetis K20 series. That device has two SPI chip selects:
The main interface's behaviour depends on the loaded firmware
and is currently unused.
The secondary interface can be used to update the firmware using
EzPort protocol. This is implemented by this driver using the
kernel's firmware API. The firmware is being flashed into
non-volatile flash memory, so it is enough to flash it once
and not on every boot. Flashing will wear the flash memory
(it has a life time of at least 10k programming cycles). At
the same time only occasional FW updates are expected (like e.g.
a BIOS update). Thus the firmware update is triggered via sysfs
instead of doing it in the driver's probe routine like many
other drivers.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-4-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some additional information is required for updating PCH FIVR values
upon WiFi channel changes.
New attributes added to the existing sysfs:
fivr_switching_freq_mhz : Get the FIVR switching control frequency.
Uses ACPI method GFCS.
fivr_switching_fault_status: Read the FIVR switching frequency control
fault status. Uses ACPI method GFFS.
ssc_clock_info : Presents SSC (spread spectrum clock) information for
EMI (Electro magnetic interference) control. Use ACPI
method GEMI (refer to the description of GEMI method
below).
GFFS
This ACPI method is used to read the FIVR switching frequency control
fault status.
Bits Description
[0:0] Fault status when set to 1
[31:1] Reserved
GFCS
This ACPI method is used to read the FIVR switching control frequency.
Bits Description
[11:0] Actual Frequency = value * XTAL_FREQ / 128
[31:12] Reserved
GEMI
This ACPI method is used to read the programmed register value for
EMI (Electro magnetic interference) control.
Bits Description
[7:0] Sets clock spectrum spread percentage:
0x00=0.2% , 0x3F=10%
1 LSB = 0.1% increase in spread (for
settings 0x01 thru 0x1C)
1 LSB = 0.2% increase in spread (for
settings 0x1E thru 0x3F)
[8] When set to 1, enables spread
spectrum clock
[9] 0: Triangle mode. FFC frequency
walks around the Fcenter in a linear
fashion
1: Random walk mode. FFC frequency
changes randomly within the SSC
(Spread spectrum clock) range
[10] 0: No white noise. 1: Add white noise
to spread waveform
[11] When 1, future writes are ignored.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
fadvise() allows the user to expand the readahead window to double with
POSIX_FADV_SEQUENTIAL, now. But, in some use cases, it is not that
sufficient and we need to meet the need in a restricted way. We can
control the multiplier value of bdi device readahead between 2 (default)
and 256 for POSIX_FADV_SEQUENTIAL advise option.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a new sysfs handle to export the new diskseq value.
Place it in <sysfs>/block/<disk>/diskseq and document it.
$ grep . /sys/class/block/*/diskseq
/sys/class/block/loop0/diskseq:13
/sys/class/block/loop1/diskseq:14
/sys/class/block/loop2/diskseq:5
/sys/class/block/loop3/diskseq:6
/sys/class/block/ram0/diskseq:1
/sys/class/block/ram1/diskseq:2
/sys/class/block/vda/diskseq:7
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-5-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement Host Performance Buffer (HPB) initialization and add function
calls to UFS core driver.
NAND flash-based storage devices, including UFS, have mechanisms to
translate logical addresses of I/O requests to the corresponding physical
addresses of the flash storage. In UFS, logical-to-physical-address (L2P)
map data, which is required to identify the physical address for the
requested I/Os, can only be partially stored in SRAM from NAND flash. Due
to this partial loading, accessing the flash address area, where the L2P
information for that address is not loaded in the SRAM, can result in
serious performance degradation.
The basic concept of HPB is to cache L2P mapping entries in host system
memory so that both physical block address (PBA) and logical block address
(LBA) can be delivered in HPB read command. The HPB read command allows to
read data faster than a regular read command in UFS since it provides the
physical address (HPB Entry) of the desired logical block in addition to
its logical address. The UFS device can access the physical block in NAND
directly without searching and uploading L2P mapping table. This improves
read performance because the NAND read operation for uploading L2P mapping
table is removed.
In HPB initialization, the host checks if the UFS device supports HPB
feature and retrieves related device capabilities. Then, HPB parameters are
configured in the device.
Total start-up time of popular applications was measured and the difference
observed between HPB being enabled and disabled. Popular applications are
12 game apps and 24 non-game apps. Each test cycle consists of running 36
applications in sequence. We repeated the cycle for observing performance
improvement by L2P mapping cache hit in HPB.
The following is the test environment:
- kernel version: 4.4.0
- RAM: 8GB
- UFS 2.1 (64GB)
Results:
+-------+----------+----------+-------+
| cycle | baseline | with HPB | diff |
+-------+----------+----------+-------+
| 1 | 272.4 | 264.9 | -7.5 |
| 2 | 250.4 | 248.2 | -2.2 |
| 3 | 226.2 | 215.6 | -10.6 |
| 4 | 230.6 | 214.8 | -15.8 |
| 5 | 232.0 | 218.1 | -13.9 |
| 6 | 231.9 | 212.6 | -19.3 |
+-------+----------+----------+-------+
We also measured HPB performance using iozone:
$ iozone -r 4k -+n -i2 -ecI -t 16 -l 16 -u 16 -s $IO_RANGE/16 -F \
mnt/tmp_1 mnt/tmp_2 mnt/tmp_3 mnt/tmp_4 mnt/tmp_5 mnt/tmp_6 mnt/tmp_7 \
mnt/tmp_8 mnt/tmp_9 mnt/tmp_10 mnt/tmp_11 mnt/tmp_12 mnt/tmp_13 \
mnt/tmp_14 mnt/tmp_15 mnt/tmp_16
Results:
+----------+--------+---------+
| IO range | HPB on | HPB off |
+----------+--------+---------+
| 1 GB | 294.8 | 300.87 |
| 4 GB | 293.51 | 179.35 |
| 8 GB | 294.85 | 162.52 |
| 16 GB | 293.45 | 156.26 |
| 32 GB | 277.4 | 153.25 |
+----------+--------+---------+
Link: https://lore.kernel.org/r/20210712085830epcms2p8c1288b7f7a81b044158a18232617b572@epcms2p8
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Can Guo <cang@codeaurora.org>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need the fixes in here, and this resolves a merge issue with
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm-misc-next for v5.15-rc1:
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
This adds bi-directional (host->device, device->host)
volume/mute support to the f_uac1 driver by adding
Feature Units and interrupt endpoint.
Currently only master channel is supported.
Volume and mute are configurable through configfs,
by default volume has -100..0 dB range with 1 dB step.
Similar to existing flexible endpoints configuration,
Feature Unit won't be added to the topology if both
mute and volume are not enabled, also interrupt endpoint
isn't added to the device if no feature unit is present
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20210712125529.76070-5-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds bi-directional (host->device, device->host)
volume/mute support to the f_uac2 driver by adding
Feature Units and interrupt endpoint.
Currently only master channel is supported.
Volume and mute are configurable through configfs,
by default volume has -100..0 dB range with 1 dB step.
Similar to existing flexible endpoints configuration,
Feature Unit won't be added to the topology if both
mute and volume are not enabled, also interrupt endpoint
isn't added to the device if no feature unit is present
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20210712125529.76070-4-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
The DMA-BUF attachment statistics form a subset of the DMA-BUF
sysfs statistics that recently merged to the drm-misc tree. They are not
UABI yet since they have not merged to the upstream Linux kernel.
Since there has been a reported a performance regression due to the
overhead of sysfs directory creation/teardown during
dma_buf_attach()/dma_buf_detach(), this patch deletes the DMA-BUF
attachment statistics from sysfs.
Fixes: bdb8d06dfe ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs")
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713040742.2680135-1-hridya@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
Added gc_reclaimed_segments and gc_segment_mode sysfs nodes.
1) "gc_reclaimed_segments" shows how many segments have been
reclaimed by GC during a specific GC mode.
2) "gc_segment_mode" is used to control for which gc mode
the "gc_reclaimed_segments" node shows.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've improved the compression support especially for
Android such as allowing compression for mmap files, replacing the
immutable bit with internal bit to prohibits data writes explicitly,
and adding a mount option, "compress_cache", to improve random reads.
And, we added "readonly" feature to compact the partition w/
compression enabled, which will be useful for Android RO partitions.
Enhancements:
- support compression for mmap file
- use an f2fs flag instead of IMMUTABLE bit for compression
- support RO feature w/ extent_cache
- fully support swapfile with file pinning
- improve atgc tunability
- add nocompress extensions to unselect files for compression
Bug fixes:
- fix false alaram on iget failure during GC
- fix race condition on global pointers when there are multiple f2fs
instances
- add MODULE_SOFTDEP for initramfs
As usual, we've also cleaned up some places for better code
readability (e.g., sysfs/feature, debugging messages, slab cache
name, and docs)"
* tag 'f2fs-for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
f2fs: drop dirty node pages when cp is in error status
f2fs: initialize page->private when using for our internal use
f2fs: compress: add nocompress extensions support
MAINTAINERS: f2fs: update my email address
f2fs: remove false alarm on iget failure during GC
f2fs: enable extent cache for compression files in read-only
f2fs: fix to avoid adding tab before doc section
f2fs: introduce f2fs_casefolded_name slab cache
f2fs: swap: support migrating swapfile in aligned write mode
f2fs: swap: remove dead codes
f2fs: compress: add compress_inode to cache compressed blocks
f2fs: clean up /sys/fs/f2fs/<disk>/features
f2fs: add pin_file in feature list
f2fs: Advertise encrypted casefolding in sysfs
f2fs: Show casefolding support only when supported
f2fs: support RO feature
f2fs: logging neatening
f2fs: introduce FI_COMPRESS_RELEASED instead of using IMMUTABLE bit
f2fs: compress: remove unneeded preallocation
f2fs: atgc: export entries for better tunability via sysfs
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.14-rc1.
Nothing major here just lots of little changes for new hardware and
features. Highlights are:
- more USB 4 support added to the thunderbolt core
- build warning fixes all over the place
- usb-serial driver updates and new device support
- mtu3 driver updates
- gadget driver updates
- dwc3 driver updates
- dwc2 driver updates
- isp1760 host driver updates
- musb driver updates
- lots of other tiny things.
Full details are in the shortlog.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
phy: qcom-qusb2: Add configuration for SM4250 and SM6115
dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
USB: cdc-acm: blacklist Heimann USB Appset device
usb: xhci-mtk: allow multiple Start-Split in a microframe
usb: ftdi-elan: remove redundant continue statement in a while-loop
usb: class: cdc-wdm: return the correct errno code
xhci: remove redundant continue statement
usb: dwc3: Fix debugfs creation flow
usb: gadget: hid: fix error return code in hid_bind()
usb: gadget: eem: fix echo command packet response issue
usb: gadget: f_hid: fix endianness issue with descriptors
Revert "USB: misc: Add onboard_usb_hub driver"
Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
xhci: solve a double free problem while doing s4
xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
...
Pull staging / IIO driver updates from Greg KH:
"Here is the big set of IIO and staging driver patches for 5.14-rc1.
Loads of IIO driver updates and additions in here, the shortlog has
the full details.
For the staging side, we moved a few drivers out of staging, and
deleted the kpc2000 drivers as the original developer asked us to
because no one was working on them anymore.
Also in here are loads of coding style cleanups due to different
intern projects focusing on the staging tree to try to get experience
doing kernel development.
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits)
staging: hi6421-spmi-pmic: cleanup some macros
staging: hi6421-spmi-pmic: change identation of a table
staging: hi6421-spmi-pmic: change a return code
staging: hi6421-spmi-pmic: better name IRQs
staging: hi6421-spmi-pmic: use devm_request_threaded_irq()
staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions
spmi: hisi-spmi-controller: move driver from staging
phy: phy-hi3670-usb3: move driver from staging into phy
staging: rtl8188eu: remove include/rtw_debug.h header
staging: rtl8188eu: remove GlobalDebugLevel variable
staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition
staging: rtl8188eu: remove RT_TRACE macro
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c
...
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
