Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
Add compatible string "amd,versal2-dma-1.0" to support AMD Versal Gen 2
platform.
AMD Versal Gen 2 has 8 LPD DMA IPs in PS that can be used as general
purpose DMAs which is designed to support memory to memory and memory to
IO buffer transfer. Versal Gen 2 DMA IP has different interrupt register
offset.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808100024.317497-2-abin.joseph@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible string "fsl,imx8qxp-dma-apbh". It requires power-domains
compared with "fsl,imx28-dma-apbh".
Allow 'power-domains' property because i.MX8DXL i.MX8QM and i.MX8QXP need
it.
Keep the same restriction about 'power-domains' for other compatible
strings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240801214601.2620843-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The IP of QDMA ls1028/ls1043/ls1046/ is same as ls1021. So allow compatible
string fallback to fsl,ls1021a-qdma.
The difference is that ls1021a-qdma have 3 irqs, and other have 5 irqs.
Fix below CHECK_DTB warning.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: dma-controller@8380000: compatible: ['fsl,ls1046a-qdma', 'fsl,ls1021a-qdma'] is too long
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240710145400.2257718-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
All compatible string include 'fsl,ls1021a-qdma'. Previous if check are
always true.
if:
properties:
compatible:
contains:
enum:
- fsl,ls1021a-qdma
Change to check other compatible strings to get correct logic and fix
below CHECK_DTB warnings.
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb:
dma-controller@8380000: interrupts: [[0, 43, 4], [0, 251, 4], [0, 252, 4], [0, 253, 4], [0, 254, 4]] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240701195717.1843041-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Spreadtrum SC9860 DMA bindings to DT schema.
Changes during conversion:
- rename file to match compatible
- make interrupts optional, the AGCP DMA controller doesn't need it
- describe the optional ashb_eb clock for the AGCP DMA controller
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/Zob1+kGW1xeBKehA@standask-GA-A55M-S2HP
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The STM32 DMA3 is a Direct Memory Access controller with different features
depending on its hardware configuration.
The channels have not the same capabilities, some have a larger FIFO, so
their performance is higher.
This patch describes STM32 DMA3 bindings, used to select a channel that
fits client requirements, and to pre-configure the channel depending on
the client needs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-5-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allow 'power-domains' property because i.MX8DXL i.MX8QM and i.MX8QXP need
it. EDMA supports each power-domain for each dma channel. So minItems and
maxItems align 'dma-channels'.
Change fsl,imx93-edma3 example to fsl,imx8qm-edma to reflect this variants.
Fixed below DTB_CHECK warning:
dma-controller@599f0000: Unevaluated properties are not allowed ('power-domains' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240417152457.361340-2-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce the compatible string 'fsl,imx8ulp-edma' to enable support for
the i.MX8ULP's eDMA, alongside adjusting the clock numbering. The i.MX8ULP
eDMA architecture features one clock for each DMA channel and an additional
clock for the core controller. Given a maximum of 32 DMA channels, the
maximum clock number consequently increases to 33.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-4-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
Convert the Marvell MMP DMA binding to YAML.
The TXT binding mentions that the controller may have one IRQ per DMA
channel. Examples of this were dropped in the YAML binding because of
dt_binding_check complaints (either too many interrupt cells or
interrupts) and the fact that this is not used in any of the in-tree
device trees.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240131-pxa-dma-yaml-v2-2-9611d0af0edc@skole.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA controllers found on the H616 and H618 are the same as the one
found on the A100. The only difference is the DMA endpoint (DRQ) layout.
Since the number of channels and endpoints are described with additional
generic properties, just add a new H616-specific compatible string and
fallback to the A100 one.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240127163247.384439-5-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The compatibles "ti,omap-sdma" and "ti,dra7-dma-crossbar" aren't documented
by a schema which causes warnings:
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
As no one has cared to fix them, just drop them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231122235050.2966280-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Unified DMA (UDMA) module on K3 SoCs have TX and RX channel cfg and RX
flow cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-5-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Packet DMA (PKTDMA) module on K3 SoCs have ring cfg, TX and RX channel
cfg and RX flow cfg register regions which are usually configured by a
Device Management firmware. But certain entities such as bootloader
(like U-Boot) may have to access them directly. Describe this region in
the binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-4-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Block copy DMA(BCDMA)module on K3 SoCs have ring, BCHAN, TX and RX
channel cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
five regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
