The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet
PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller
(MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible
with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver
integrated into the LAN8650/1. The communication between the Host and the
MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial
Interface (TC6).
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-15-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Merge updates related to system sleep, operating performance points
(OPP) updates, and PM tooling updates for 6.12-rc1:
- Remove unused stub for saveable_highmem_page() and remove deprecated
macros from power management documentation (Andy Shevchenko).
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo).
- Update the maintainers information for the operating-points-v2-ti-cpu DT
binding (Dhruva Gole).
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring).
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin).
- Make cpupower display residency value in idle-info (Aboorva
Devarajan).
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV).
- Add SWIG support to cpupower (John B. Wyatt IV).
* pm-sleep:
PM: hibernate: Remove unused stub for saveable_highmem_page()
Documentation: PM: Discourage use of deprecated macros
PM: sleep: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PM: hibernate: Use sysfs_emit() and sysfs_emit_at() in "show" functions
* pm-opp:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
* pm-tools:
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
pm-graph: Update directory handling and installation process in Makefile
pm-graph: Make git ignore sleepgraph.py artifacts
tools/cpupower: display residency value in idle-info
New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588
and some non-critical dts cleanups.
* tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE
arm64: dts: rockchip: Add GameForce Ace
dt-bindings: arm: rockchip: Add GameForce Ace
arm64: dts: rockchip: rk3588s fix sdio pins to pull up
arm64: dts: rockchip: Add RGA2 support to rk3588
arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b
arm64: dts: rockchip: Add Hardkernel ODROID-M2
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2
arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6
Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Describe the inputs from the PMU that the Bluetooth module on wcn6855
consumes and drop the ones from the host. This breaks the current
contract but the only two users of wcn6855 upstream - sc8280xp based
boards - will be updated in DTS patches sent separately while the
hci_qca driver will remain backwards compatible with older DT sources.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'multi-master' property is defined by core i2c-controller schema in
dtschema package, so binding which references it and has
unevaluatedProperties:false, does not need to mention it. It is
completely redundant here.
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Top level defines clocks as variable from 3 to 6 items, so each clause
in if:then: should narrow it further with explicit min and maxItems.
Without minItems, the constrain from top-level is being applied, thus
qcom,msm8996-cci allows between 3 and 4 clocks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Properties are expected to be defined in top-level "properties:" block
and further customized in "if:then:". Only one variant has power
domains, so add respective top-level property and disallow it for other
devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Both xxx and xxx-names properties with variable number of items should
be constrained in each "if:then:". Add missing constraints for clocks,
since we have such for clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
We need the USB fixes in here as well, and this also resolves the merge
conflict in:
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
Chanwoo writes:
Update extcon next for v6.12
Detailed description for this pull request:
- Add missing child node port on exttcon-ptn5150 binding document
- Convert extcon-usb-gpio.txt to yaml format for binding document
- Add new LC824206XA microUSB switch driver
: Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
accessory detector chip. It has been tested on a Lenovo Yoga Tablet 2 Pro
1380. And this driver is only used on x86/ACPI (non devicetree) devices,
Therefor there is no devicetree bindings documentation.
- Apply immutable branch between power_supply and extcon tree for extcon-lc824206xa.c
* tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: lc824206xa: Fix build error of POWER_SUPPLY_PROP_USB_TYPE
dt-bindings: extcon: convert extcon-usb-gpio.txt to yaml format
dt-bindings: extcon: ptn5150: add child node port
extcon: Add LC824206XA microUSB switch driver
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
Jonathan writes:
IIO: 2nd set of new device support features and cleanup for 6.12
Late pull request as I was planing to include another series that
is waiting for a fix to end up in char-misc-next. That can wait
for next cycle.
Includes one immutable branch merge from MFD to get a necessary header
change.
Usual mix of a few new drivers, additional device support for existing
drivers, new features and a bunch of cleanup across tree.
New device support
==================
asahi-kasei,ak8975
- A few minor fixes as precursors to support for the AK09118 magnetometer
that is very similar to the already supported AK09112
awinic,aw96103
- New driver for this capacitive proximity sensor.
x-powers,axp202
- Add support for the axp717 (including merge of MFD immutable branch).
sophgo,saradc
- New driver for this SOC ADC.
Features
========
adi,ad4695
- Add calibration support.
bosch,bmi323
- Ensure device is in lowest power state on suspend.
Cleanup and minor fixes
=======================
treewide
- Start to standardize formatting of id tables (ADC drivers done so far).
adi,ad5449
- Drop platform data support as long unused in upstream kernel.
bosch,bmc150
- Use fwnode_irq_get_by_name() in place of of_ variant.
- Use ACPI_HANDLE() to get the handle directly rather than via
ACPI_COMPANION()
google,cros_ec_mkbp_proximity
- Include mod_devicetable.h instead of broader of.h
mirochip,mcp320x
- Drop vendorless compatible entries as not needed for backwards
compatibility and should not be used in new boards.
st,lsm6dsx
- Use iio_read_acpi_mount_matrix() helper instead of open coding the
same.
- Drop some unnecessary dev_fwnode() calls to check if a fwnode is
available. All the calls made handle this anyway.
xilinx,ams
- Use device_for_each_child_node_scoped() to avoid manual release of
fwnode handle.
tools,generic-buffer
- Handle failure to allocate trigger name.
- Cleanup .*.cmd files if present.
* tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
tools/iio: Add memory allocation failure check for trigger_name
iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
iio: adc: mcp320x: Drop vendorless compatible strings
iio: dac: ad5449: drop support for platform data
iio: adc: xilinx-ams: use device_* to iterate over device child nodes
iio: ABI: document ad4695 new attributes
doc: iio: ad4695: update for calibration support
iio: adc: ad4695: implement calibration support
iio: adc: ad4695: add 2nd regmap for 16-bit registers
iio: bmi323: peripheral in lowest power state on suspend
...
Merge series from Andre Przywara <andre.przywara@arm.com>:
This is remainder of the AXP717 fix series, containing support for the
boost regulator. This is meant to increase the battery voltage to the 5
volts required to provide the USB VBUS power.
It's the usual trinity of DT bindings patch (1/3), the MFD part
describing the PMIC registers (2/3) and the final patch to model the
regulator (3/3).
Compared to v2, this drops the merged patches, and just retains the
boost related parts. It also changes the internal name of the register
to AXP717_MODULE_EN_CONTROL_2, since there is another control register
we will need later for battery support.
