The test packet which is sent to FW for the PQ heartbeat is used also as
the trigger in FW to send the EQ heartbeat event.
Add the time of the last sent packet to the debug info which is printed
upon a EQ heartbeat failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
In order to have better debuggability upon encountering FW issues,
We are adding additional info once CPU packet timeout expires.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Driver should check and report any fatal errors detected by preboot,
before it attempts to load the boot fit.
Some errors may cause the driver to stop the boot process and mark
the device as unusable.
This check will allow the driver to fail and print the error reported
by preboot and skip the time wasting attempt of trying to load the
boot fit, which will fail due to the error.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Struct comms_desc_header is deprecated and replaced by struct
comms_msg_header. As a preparation for removing comms_desc_header
from FW, all it's usage in code is replaced by comms_msg_header.
Signed-off-by: Igal Zeltser <izeltser@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Trace events might still be recorded after the accel device is released,
while the device name is no longer available.
Modify the trace functions to use the parent device instead, which is
available at that point and still informative as the device name.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
If we detected heartbet event while some daemon in the background send
(via driver interface) CPUCP messages the dmesg will be flooded.
Instead, a slight refactor in hl_fw_send_cpu_message() returns -EAGAIN
when CPU is disabled (i.e. heartbeat failure) and only then.
Later, all calling functions that may be invoked by user space can issue
prints only if the error code is not -EAGAIN.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Currently, the code contains 2 types of FW version comparison functions:
- hl_is_fw_sw_ver_[below/equal_or_greater]()
- gaudi2 specific function of the type
gaudi2_is_fw_ver_[below/above]x_y_z()
Moreover, some functions use the inner FW version which shuold be only
stage during development but not version dependencies.
Finally, some tests are done to deprecated FW version to which LKD
should hold no compatibility.
This commit aligns all APIs to a single function that just compares the
version and return an integers indicator (similar in some way to
strcmp()).
In addition, this generic function now considers also the sub-minor FW
version and also remove dead code resulting in deprecated FW versions
compatibility.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The reserved memory for FW is currently saved in an ASIC property in
units of MB, just like the value that comes from FW.
Except the fact that it is not clear from the property's name, it means
also that a calculation to actual size is required everywhere that it is
used.
Modify the property to hold the size in bytes.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the reserved memory request from FW is handled when running
with preboot only, but this request is relevant also when running with
full FW.
Modify to always handle this reservation request.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User will provide a nonce via the INFO ioctl, and will retrieve
the signed device info generated using given nonce.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use a predefined mask which set the device critical boot errors.
Driver will fail and stop its loading, only upon detecting at least
one of those errors defined in this mask.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are cases such when FW runs MBIST, that preboot is expected to take
longer than the usual. In such cases the firmware reports status
SECURITY_READY/IN_PREBOOT and we extend the timeout waiting for it.
This is currently implemented for Gaudi2 only.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The CPUCP interface is moved to a shared folder outside of accel as
a pre-requisite to upstream the NIC drivers that will also include
this file.
Signed-off-by: David Meriin <dmeriin@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is possible for FW to request reserved space in dram.
If the device supports this option, it will retrieve the size from the
f/w and will reserve it.
Currently we add the common code infrastructure to support it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add dump of an error reported from f/w during boot time.
This error indicates a failure with setting temperature threshold.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The preboot used to statically allocate memory for the comms descriptor
on the device memory when driver requested the descriptor information.
Now preboot moved to dynamic memory allocation where it wants to check
the size the driver expects vs. what the f/w expects.
Note there are no backward compatibility issues as older f/w versions
simply ignore this value.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Any FW component we load must be followed by a corresponding state
update. However, it seems that so far we skipped doing so for the
bootfit case, so fix that.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently, we rely on COMMS protocol's ack to verify that WFE command
has been acknowledged by the FW. However, this does not guarantee that
the device status has been updated.
Although unlikely, this could trigger a race since the driver expects
the device to be halted at that stage, but it might not be.
Therefore, we increase WFE's robustness by polling on the status
register that will be updated once the device is actually halted.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is done depending on the FW version. The cpucp method is
preferable and saves scratchpads resource.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is not always possible to know the FW's SW version from the inner FW
version. Therefore we should extract the general SW version in addition
to the FW version and use it in functions like
'hl_is_fw_ver_below_1_9' etc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We later want to add fields for Firmware SW version. The current
extracted FW version is the inner FW versioning so the new name
is better and also better differentiate from the FW's SW version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
the helper is extract_u32_until_given_char and can later be used to
also get the major/minor of the sw version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state).
Once sent, FW's CPU isn't expected to continue communicating with LKD.
Therefore, the stage of waiting for COMMS_STS_OK should be skipped or
else waiting for COMMS_STS_OK will simply timeout, which will trigger
unexpected behavior.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
1. Rename the func to hl_get_preboot_major_minor because we also set
the extracted values in hdev fields.
2. Free the allocated string in the calling function which makes more
sense
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
COMMS protocol is used for LKD <--> FW communication, and any
communication failure between the two might turn out to be
destructive, hence, it should be well emphasized.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Replace initialization of "struct cpucp_packet" from "{0} to "{}" to
avoid a "missing braces around initializer" compilation warning.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit enhances the following error messages to also provide the
type of error occurred, this in order to ease debugging of errors
detected during firmware-load.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This function shall be used whenever components enable/binning masks
should be updated.
Usage is in one of the below cases:
- update user (or default) component masks
- update when getting the masks from FW (either CPUCP or COMMS)
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Now that we have a subsystem for compute accelerators, move the
habanalabs driver to it.
This patch only moves the files and fixes the Makefiles. Future
patches will change the existing code to register to the accel
subsystem and expose the accel device char files instead of the
habanalabs device char files.
Update the MAINTAINERS file to reflect this change.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
