On VFs and SOCs with GC 9.4.4, VCN RRMT is disabled.
Only local register offsets should be used on JPEG v4.0.3 as they cannot
handle remote access to other AIDs. Since only local offsets are used,
the special write to MCM_ADDR register is no longer needed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling gfxoff quirk results in perfectly usable
graphical user interface on HP 705G4 DM with R5 2400G.
Without the quirk, X server is completely unusable as
every few seconds there is gpu reset due to ring gfx timeout.
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework how VM operations synchronize to submissions. Provide an
amdgpu_sync container to the backends instead of an reservation
object and fill in the amdgpu_sync object in the higher layers
of the code.
No intended functional change, just prepares for upcomming changes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Friedrich Vock <friedrich.vock@gmx.de>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the MES FW resets kernel compute queue always failed, this
may caused by the KIQ failed to process unmap KCQ. So, before MES
FW work properly that will fallback to driver executes dequeue and
resets SPI directly. Besides, rework the ring reset function and make
the busy ring type reset in each function respectively.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a racing condition that cp firmware modifies
MQD in reset sequence after driver updates it for
remapping. We have to wait till CP_HQD_ACTIVE becoming
false then remap the queue.
v2: fix KIQ locking (Alex)
v3: fix KIQ locking harder (Jessie)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring reset callbacks for gfx and compute.
v2: fix gfx handling
v3: wait for KIQ to complete
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a racing condition that cp firmware modifies
MQD in reset sequence after driver updates it for
remapping. We have to wait till CP_HQD_ACTIVE becoming
false then remap the queue.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename to gfx_v11_0_kgq_init_queue() to better align with
the other naming in the file.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the MES FW resets kernel compute queue always failed, this
may caused by the KIQ failed to process unmap KCQ. So, before MES
FW work properly that will fallback to driver executes dequeue and
resets SPI directly. Besides, rework the ring reset function and make
the busy ring type reset in each function respectively.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the compute pipe reset, and the driver will
fallback to pipe reset when queue reset fails.
The pipe reset only deactivates the queue which is
scheduled in the pipe, and meanwhile the MEC pipe
will be reset to the firmware _start pointer. So,
it seems pipe reset will cost more cycles than the
queue reset; therefore, the driver tries to recover
by doing queue reset first.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When MES is enabled KIQ is not available. Return an error
when someone uses the debugfs preempt test interface in
that case.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When MES is enabled KIQ is not available. Return an error
when someone uses the debugfs preempt test interface in
that case.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
log message "Dumping IP State Completed" needs to
be logged only once when state dumping is complete.
Hence moving it out of the for loop.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[background] when unloading amdgpu driver right after running a
workload, drain_workqueue is causing "Fence fallback timer
expired on ring sdma0.0". Under sriov, this issue will cause sriov
full access timeout and a reset happening.
move drain_workqueue before shutdown is set to allow ih process and
before enter full access under sriov to avoid full access time cost.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the coredump immediately after a job timeout to get a closer
representation of GPU's error status.
V2: This will skip printing vram_lost as the GPU reset is not
happened yet (Alex)
V3: Unconditionally call the core dump as we care about all the reset
functions(soft-recovery and queue reset and full adapter reset, Alex)
V4: Do the dump after adev->job_hang = true (Sunil)
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vm lost status can only be obtained after a GPU reset occurs, but
sometimes a dev core dump can be happened before GPU reset. So a new
argument is added to tell the dev core dump implementation whether to
skip printing the vram_lost status in the dump.
And this patch is also trying to decouple the core dump function from
the GPU reset function, by replacing the argument amdgpu_reset_context
with amdgpu_job to specify the context for core dump.
V2: Inform user if VRAM lost check is skipped so users don't assume
VRAM wasn't lost (Alex)
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add this flag to enable experimental resets for testing before they
are fully validated.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When app unmap vm ranges(munmap) kfd/svm starts drain pending page fault and
not handle any incoming pages fault of this process until a deferred work item
got executed by default system wq. The time period of "not handle page fault"
can be long and is unpredicable. That is advese to kfd performance on page
faults recovery.
This patch uses time stamp of incoming page fault to decide to drop or recover
page fault. When app unmap vm ranges kfd records each gpu device's ih ring
current time stamp. These time stamps are used at kfd page fault recovery
routine.
Any page fault happened on unmapped ranges after unmap events is application
bug that accesses vm range after unmap. It is not driver work to cover that.
By using time stamp of page fault do not need drain page faults at deferred
work. So, the time period that kfd does not handle page faults is reduced
and can be controlled.
Signed-off-by: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
