[Why]
Previous disable ODM policy due to underflow issue with sharpener.
Issue is resolved after updating sharpening policy to apply to
both windowed and fullscreen video
[How]
Remove sharpness check disabling Dynamic ODM policy
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Addressed previous issues with quality changes and new issues due to
rolling back quality changes.
[How]
This reverts commit f9e6759888, fixes merge conflicts, and fixed some
formatting errors.
Store current sharpness level for each pregen table to minimize
calculating sharpness table every time.
Disable dynamic ODM when sharpness is enabled.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Prefetch calculations did not guarantee that bandwidth required in
mode support was less than mode programming which can cause failures.
[HOW]
Fix bandwidth calculations to assume fixed times for OTO schedule,
and choose which schedule to use based on time to fetch pixel data.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4.c:12:28: warning:
symbol 'core_dcn4_ip_caps_base' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
And do not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:6853:56: warning:
symbol 'core_dcn4_g6_temp_read_blackout_table' was not declared. Should it be static?
This symbol is not used outside of dml2_core_dcn4_calcs.c, so marks it static.
And not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Based on power measurement result, in most cases when display clock
is higher than Vmin display clock, lowering display clock using
dynamic ODM will improve overall power consumption by 0 to 4 watts
even if we can't reach Vmin.
[how]
Allow vmin optimization applied even if dispclk can't reach Vmin.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a several statements with two following semicolons, replace
these with just one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently TR0 (trip 0) is not properly budgeting for urgent latency in
DML2.1. This results in overly aggressive prefetch schedules that are
vulnerable to request return jitter, resulting in severe underflow at
the start of the frame.
[HOW]
Forcing 3DLUT DMA check to enable causes urgent latency to be budgeted
properly into the prefetch schedule, avoiding the vulnerability.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is
a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus
p->UnboundedRequestEnabled checks its address, not bool value.
To check value, *p->UnboundedRequestEnabled is used instead.
This fixes 1 REVERSE_INULL issue reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Functions get_per_method_common_meta and get_expanded_strategy_list can
return null and thus it is necessary to check their returned values
before dereferencing.
This fixes 3 NULL_RETURNS issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The disable fams2 operation was reworked, but some of the old code
remained. This commit removes the disable_fams2_drr from the
dml2_stream_parameters.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use more accurate names to refer to the asic architecture.
dcn3 in DML actually refers to DCN32 and DCN321, so rename it to dcn32x
dcn4 refers to any DCN4x soc., and hence rename dcn4 to dcn4x
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if the mode is not supported dml2_check_mode_supported() would still return true.
This causes an unsupported mode to be programmed.
[How]
Check if the mode is supported or not and return the proper result.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.
[HOW]
Increase dummy_boolean's array size to 3.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
OTG has new functionality to allow P-State relative to VStartup. Keepout region
for this should be configured based on DML outputs same as other global sync
params.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Current logic in mcache admissibility check has flaw if
calculated number of maches are 3 or more per surface,
so sometimes the check may pass when it should fail,
and sometimes may fail when it should pass, fix the
issue and also adding additional check to make sure that
required number of mcaches per surface cannot be
higher than number of pipes + 1, used on that surface.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DML2.1 currently has no concept of a "blanked" stream. For cases like DPMS off,
things like UCLK p-state is always allowed, so PMO is not required to optimize
for it.
[HOW]
Add flag to DML2.1 display configuration to indicate all streams are blanked,
so certain operations and optimizations can be skipped for optimal programming
when displays are blanked.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Variables used as denominators and maybe not assigned to other values,
should not be 0. Change their default to 1 so they are never 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Based on power measurement result, in most cases when display clock is higher
than Vmin display clock, lowering display clock using dynamic ODM will improve
overall power consumption by 0 to 4 watts even if we can't reach Vmin.
[how]
Allow vmin optimization applied even if dispclk can't reach Vmin.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Update coefficients and LUT tables for scaler and sharpener
to improve quality and support different use cases (SDR/HDR)
[How]
Move scaler coefficients to new file dc_spl_scl_easf_filters.c
Remove older coefficients file dc_sp_scl_filters_old.c
Update default taps for EASF support
Update LLS policy for DON'T CARE case
Update cositing offset from 0.5 to 0.25
Add support to adjust sharpness based on level, use case,
and scaling ratio ( using discrete levels )
Apply sharpness to all RGB surfaces and both NV12 and P010
video ( in fullscreen only ). Upscale and 1:1 ratios only
Enable scaler when sharpening 1:1 ratios
Add support for coefficients that are in S1.10 format
(convert to S1.12 format)
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The return value from the call to dml21_find_dc_pipes_for_plane() is int.
However, the return value is being assigned to an unsigned int variable
'num_pipes', the condition if(num_pipes <= 0) is not rigorous enough,
so making 'num_pipes' an int.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:318:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:360:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9454
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
