Commit Graph

8 Commits

Author SHA1 Message Date
Dillon Varone
9932ca4c03 drm/amd/display: Add P-State Keepout to dcn401 Global Sync
[WHY&HOW]
OTG has new functionality to allow P-State relative to VStartup. Keepout region
for this should be configured based on DML outputs same as other global sync
params.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23 17:07:12 -04:00
Alvin Lee
4228900a64 drm/amd/display: Wait for double buffer update on ODM changes
[WHAT & HOW]
We must wait for ODM double buffer updates to complete
before exiting the pipe update sequence or we may reduce
DISPCLK and hit some transient underflow (pixel rate is
reduced before the pipes have ODM enabled).

Reviewed-by: Samson Tam <samson.tam@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27 17:10:37 -04:00
Relja Vojvodic
239612c376 drm/amd/display: Updated optc401_set_drr to use dcn401 functions
why:
optc_401_set_drr was using an old optc3 function to update vtotal min and max,
causing crashes when disabling FAMS2

how:
Updated dcn401 to point to opt401 function for vtotal updates. This version of
the function has FAMS2 logic that allows for FAMS2 to be disabled.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05 11:25:13 -04:00
Wenjing Liu
f9d48a88eb drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe split
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.

Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.

[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.

Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13 15:46:55 -04:00
Wenjing Liu
176278d8bf drm/amd/display: reset DSC clock in post unlock update
[why]
Switching between DSC clock or disable DSC block are not double buffered update.
Corruption is observed if these updates happen before DSC double buffered
disconnection.

[how]
Move DSC disable and refclk reset to post unlock update. Wait for DSC double buffered
disconnection and all mpccs are disconnected before reset DSC clock.

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08 15:17:03 -04:00
Wenjing Liu
e6a901a008 drm/amd/display: use even ODM slice width for two pixels per container
[why]
When optc uses two pixel per container, each ODM slice width must be an
even number.

[how]
If ODM slice width is odd number increase it by 1.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30 09:57:04 -04:00
Srinivasan Shanmugam
0c28ba60f4 drm/amd/display: Address kdoc for 'Enable CRTC' in optc401_enable_crtc
This commit fixes the kdoc for 'Enable CRTC' in `optc401_enable_crtc`
function.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn401/dcn401_optc.c:177: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Enable CRTC

Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26 17:23:43 -04:00
Aurabindo Pillai
70839da636 drm/amd/display: Add new DCN401 sources
Add initial support for DCN 4.0.1.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26 17:23:13 -04:00