[why]
Currently, driver is not aware if IPS is supported. After PMFW helps
implement new message query functionality, driver will set IPS
capability flag.
[how]
Create new SMU hook function to query IPS capability. Based on the cap,
set appropriate flags to false for power-gating purposes. This will
avoid keeping SMU busy and offloading tasks to DMUB/driver.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Two issues fixed:
1. Currently, driver does not allow idle prior to PSR entry. Once
PSR1+IPS is enabled, there is intermittent hang due to DCN access
from IrqMgr during IPS2.
2. Driver is sending multiple commands to PMFW and dmcub to exit IPS
even during IPS0.
[How]
1. Set driver allow optimization prior to entering PSR mode with the
condition for eDP display only. Unregister all interrupts before
allowing driver idle and re-register interrupts when exiting from
idle. This will prevent IrqMgr to access DCN during IPS2.
2. Block sending PMFW and dmcub exit low power state commands when
driver is not in idle state.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The STREAM_MAPPER_CONTROL register offset was left uninitialized,
causing warning in the driver log at runtime
[How]
A temporary solution to add it into dcn35_create_resource_pool.
[TODO]
Remove duplication between SE_DCN35_REG_LIST_RI in dcn35_resource.h and
SE_DCN35_REG_LIST in dcn35_dio_stream_encoder.h
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <artem.grishin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some of the stream encoder registers have register offset address 0. It
is causing no display in some scenarios due to DIG_FE was not setup
correctly and was not enabled.
[How]
Fix stream encoder register define list.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was never filled in and thus never truly used.
Checking the EDID for content_type support is not required for sending
the avi infoframe packet.
v2:
- rebase to amd-staging-drm-next
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implements the 'content type' property for HDMI connectors.
Verified by checking the avi infoframe on a connected TV.
This also simplifies a lot of the code in that area as well, there were
a lot of temp variables doing very little and unnecessary logic
that was quite confusing.
It is not necessary to check for support in the EDID before sending a
'content type' value in the avi infoframe also.
v2:
- rebase to amd-staging-drm-next
- mark CRTC state for reset if content_type differs
Reviewed-by: Harry Wentland <harry.wentland@amd.com> (v1)
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently the driver looks DCN registers to access if BL is on or not.
This check is not valid if we are using AUX based brightness control.
This causes driver to not send out "backlight off" command during power off
sequence as it already thinks it is off.
[How]
Only check DCN registers if we aren't using AUX based brightness control.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
During 8k video plane resizing we could transition from MPC combine mode
back to ODM combine 2:1 + 8k video plane. In this transition minimal
transition state is based on new state with ODM combine enabled.
We are skipping this and it causes corruption because we have to reassign
a current DPP pipe to a different MPC blending tree which is not supported
seamlessly.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ODM power optimization excludes subvp power optimization but subvp
optimization can override ODM power optimization even if subvp optimization
configuration is not found. This happens with 4k144hz + 1 5k desktop plane.
We could have applied ODM power optimization however this is overridden by
subvp but subvp ends up deciding not apply its optimization.
[how]
Move ODM power optimization decision after subvp so it will try ODM power
optimization after subvp optimization is not possible.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We have a few cases where we need to perform update topology update
in dc update interface. However some of the updates are not seamless
This could cause user noticible glitches. To enforce seamless transition
we are adding a checking condition and error logging so the corruption
as result of non seamless transition can be easily spotted.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
vrr_active_fixed should also be checked when
determining if DRR is in use
How:
Add check for vrr_active_fixed when allow_freesync
and vrr_active_variable are also checked
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current dc update design has limitation to support transition from
ODM combine to minimum transition to MPC combine state seamlessly
at the capability boundary when MPO plane is resizing. This will
require dc update high level refactor in order to remove the design
limitation. The decision is to block such use case for existing products
by limiting ODM power optimization support for only those surfaces
within guaranteed viewport size. This will prevent us from transitioning
to MPC combine state when ODM power optimization is enabled.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In some cases such as 8k desktop surface with 144Hz timing, we decide to
enable ODM power optimization but this surface doesn't have a minimum
transition state. Therefore we cannot switch off ODM power optimization seamlessly
This creates path depedency on ODM power optimization decision. i.e
whether or not we should switch off ODM power optimization is dependent
on if the transition to switch off ODM power optimization from current state
is seamless. We don't desire a path dependent power optimization policy
as it is too dynamic and difficult to maintain.
[how]
Attempt ODM power optimization only after we can validate new state without
using pipe combine.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The result of predict_pipe_split calculation is no longer used but the
function is not removed. This will cause unnecessary calculation
of pipe split prediction in every frame update.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
For enabling automated testing, add a hook to DCHUBBUB interface so that
mall status can be queried by userspace through debugfs. This removes
dependence on requiring a userspace tool like UMR for querying status
for MALL static screen IGT test.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some panels request main link off before specific vertical line.
If source turn off main link after specific vertical line then
panel defect will be exposed.
[How]
Add interface to support turn off main link before specific
vertical line
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
build scaling param is overriding validation policy regarding small viewport
support. Even if ODM + windowed MPO is not supported. The decision has
to be made at the time of validation. When building scaling params, we might
be building an initial dc state as an input to DML validation. The initial state
is not supposed to be always valid and we rely on DML to modify the initial
dc state and determine the final validation result. This check is pre judging
validation result when building the initial dc state.
This causes an issue where we are transitioning from desktop only ODM
combine 2:1 to ODM bypass with 2 planes. In this case we are building
an initial state with with ODM 2:1 combine + 2 planes. This is indeed not
supported but DML is about to modify the state so it no longer uses ODM
combine. Before it reaches DML, dc resource already fails validation because
it checks that the initial state is not supported by our policy. This overrides
the ODM decision to validate this state with ODM combine disabled. Therefore
causes an unexpected validation failure when the secondary plane is added
on one side of the screen.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
