To be compatible with legacy IFWI, driver needs to carry legacy tOS and
query pmfw version to load them accordingly.
Add psp_firmware_header_v2_1 to handle the combined sos binary.
Double the sos count limit for the case of aux sos fw packed.
v2: pass the correct fw_bin_desc to parse_sos_bin_descriptor
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Query pmfw version to determine if aux sos fw needs to be loaded
in psp v13.0.
v2: refine callback to check if aux_fw loading is needed instead of
getting pmfw version barely
v3: return the comparison directly
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was only used as workaround for recovering the page tables after
VRAM was lost and is no longer necessary after the function
amdgpu_vm_bo_reset_state_machine() started to do the same.
Compute never used shadows either, so the only proplematic case left is
SVM and that is most likely not recoverable in any way when VRAM is
lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to make sure it's halted as we don't know what state
the GPU may have been left in previously.
Tested-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to set the pipe reset and cache invalidation bits
on halt otherwise we can get stale state if the CP firmware
changes (e.g., on module unload and reload).
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move enable_doorbell_selfring_aperture from common_hw_init
to common_late_init in soc24, otherwise selfring aperture is
initialized with an incorrect doorbell aperture base.
Port changes from this commit from soc21 to soc24:
commit 1c312e816c ("drm/amdgpu: Enable doorbell selfring after resize FB BAR")
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
During init, there can be some collisions on the i2c bus that result in
the EEPROM read failing. This has been mitigated in the PMFW to a
degree, but there is still a small chance that the bus will be busy.
When the read fails during RAS init, that disables page retirement
altogether, which is obviously not ideal. To try to avoid that
situation, set the eeprom_read function to retry once if the first read
fails, specifically for smu_v13_0_6.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'maxium' with 'maximum' in the comment &
replace 'diffculty' with 'difficulty' in the comment &
replace 'suppluy' with 'supply' in the comment &
replace 'Congiuration' with 'Configuration' in the comment &
replace 'eanbled' with 'enabled' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'udpate' with 'update' in the comment &
replace 'recieved' with 'received' in the comment &
replace 'dsiable' with 'disable' in the comment &
replace 'Initiailize' with 'Initialize' in the comment &
replace 'disble' with 'disable' in the comment &
replace 'Disbale' with 'Disable' in the comment &
replace 'enogh' with 'enough' in the comment &
replace 'availabe' with 'available' in the comment.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop wrapper used in one place. gfx_v9_4_3_xcc_cp_enable()
is used in one place. gfx_v9_4_3_xcc_cp_compute_enable()
is used everywhere else.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The module param pcie_p2p should be checked for kfd p2p feature, so add it.
Fixes: 75f0efbc4b ("drm/amdgpu: Take IOMMU remapping into account for p2p checks")
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The feature is not applicable to specific app platform.
v2: update the disablement condition and commit description
v3: move the setting to amdgpu_ras_check_supported
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were removing the kernfs entry for queue info before checking if the
queue could be destroyed. If it failed to get destroyed (e.g. during
some GPU resets), then we would try to delete it later during pqm
teardown, but the file was already removed. This led to a kernel WARN
trying to remove size, gpuid and type. Move the remove to after the
destroy check.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c8c5bdd7e)
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).
Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 88dcad2d07)
Cc: stable@vger.kernel.org
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fedf6db3ea)
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 578aab4ecc)
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0607a50c00)
Cc: stable@vger.kernel.org
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3cc326a43)
Cc: stable@vger.kernel.org
Instead of trying to use close_fd() on failure exits, just have
criu_get_prime_handle() store the file reference without inserting
it into descriptor table.
Then, once the callers are past the last failure exit, they can go
and either insert all those file references into the corresponding
slots of descriptor table, or drop all those file references and
free the unused descriptors.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using drm_gem_prime_handle_to_fd() to set dmabuf up and insert it into
descriptor table, only to have it looked up by file descriptor and
remove it from descriptor table is not just too convoluted - it's
racy; another thread might have modified the descriptor table while
we'd been going through that song and dance.
Switch kfd_mem_export_dmabuf() to using drm_gem_prime_handle_to_dmabuf()
and leave the descriptor table alone...
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates described non-existent parameters 'resv' and
'sync_mode', and failed to describe the existing 'sync' parameter.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or struct member 'sync' not described in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'resv' description in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'sync_mode' description in 'amdgpu_vm_cpu_prepare'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to jpeg_v2_dec_ring_parse_cs() but it has different
register ranges and a few other registers access.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).
Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid memory leaks, release q_extra_data when exiting the restore queue.
v2: Correct the proto (Alex)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since commit a61ddb4393 ("drm: enable (most) W=1 warnings by default
across the subsystem"), most of the extra warnings in the driver
Makefile are redundant. Remove them.
Note that -Wmissing-declarations and -Wmissing-prototypes are always
enabled by default in scripts/Makefile.extrawarn.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That is clearly not something we should do upstream. The SDMA is
mandatory for the driver to work correctly.
We could do this for emulation and bringup, but in those cases the
engineer should probably enabled CPU based updates manually.
This reverts commit 62eefd10ac.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Document how to use SMI system management interface to enable and
receive SVM events. Document SVM event triggers.
Define SVM events message string format macro that could be used by user
mode for sscanf to parse the event. Add it to uAPI header file to make
it obvious that is changing uAPI in future.
No functional changes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
