Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-5-hdegoede@redhat.com
Change the type for the registered backlight class device from platform
to raw/native.
The poulsbo/cedarview/oaktrail backlight support is using native GPU
backlight control and as such the type should be raw (aka native) as
is done by all the other native GPU backlight driver code.
Note this will not change much from userspace's point of view.
poulsbo/cedarview laptops typically offer both an ACPI-video
backlight interface as well as the native GPU backlight interface.
The /sys/class/backlight/acpi_video0 has a type of firmware and
userspace typically looks for firmware devices before looking
for platform devices. The typical standard lookup order is:
firmware -> platform -> raw
This means that both before and after this change typical userspace
backlight consumers (sich as e.g. GNOME) will prefer the firmware
acpi_video0 backlight device.
This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview)
and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-3-hdegoede@redhat.com
Refactor backlight support so that the gma_backlight_enable() /
gma_backlight_disable() / gma_backlight_set() functions used by
the Opregion handle will also work if no backlight_device gets
registered.
This is a preparation patch for not registering the gma500's own backlight
device when acpi_video should be used, since registering 2 backlight
devices for a single display really is undesirable.
Since the acpi-video interface often uses the OpRegion we need to keep
the OpRegion functional even when dev_priv->backlight_device is NULL.
As a result of this refactor the actual backlight_device_register()
call is moved to the shared backlight.c code and all #ifdefs related to
CONFIG_BACKLIGHT_CLASS_DEVICE are now also limited to backlight.c .
No functional changes intended.
This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview)
and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop.
Changes in v2:
- Fix unused variable warnings when CONFIG_BACKLIGHT is not selected by
marking the 2 variables as __maybe_unused.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-2-hdegoede@redhat.com
Rewrite the power.c code. For some reason this was doing locking +
refcounting + state (suspended or not) bookkeeping all by itself.
But there is no reason for this, this is all taken care of by
the runtime-pm core, through pm_runtime_get()/_put().
Besides this not being necessary the DIY code is also quite weird/
buggy in some places. E.g. power_begin() would manually do a resume
when not resumed already and force_on=true, followed by a
pm_runtime_get(), which will cause a call to gma_power_resume() to
get scheduled which would redo the entire resume again. Which can
all be replaced by a single pm_runtime_get_sync() call.
Note that this is just a cleanup, this does not actually fix
the (disabled through #if 0) runtime-pm support. It does now call
pm_runtime_enable(), but only after doing a pm_runtime_get() at
probe-time, so the device is never runtime suspended.
Doing this permanent get() + enable() instead of not calling
enable() at all is necessary for the pm_runtime_get_if_in_use() call
in gma_power_begin() to work properly.
Note this also removes the gma_power_is_on() call a check like this
without actually holding a reference is always racy, so it is a bad
idea (and therefor has no pm_runtime_foo() equivalent).
The 2 code paths which were using gma_power_is_on() are actually both
guaranteed to only run when the device is powered-on so the 2 checks
can simply be dropped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-6-hdegoede@redhat.com
Fix gnome-shell (and other page-flip users) hanging after suspend/resume
because of the gma500's IRQs not working.
This fixes 2 problems with the IRQ handling:
1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but
gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which
do not call request_irq. Replace the pre- + post-install calls with
gma_irq_install() which does prep + request + post.
2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel
Atom N2600, cedarview) netbook.
Cederview uses MSI interrupts and it seems that the BIOS re-configures
things back to normal APIC based interrupts during S3 suspend. There is
some MSI PCI-config registers save/restore code which tries to deal with
this, but on the Packard Bell Dot SC this is not sufficient to restore
MSI IRQ functionality after a suspend/resume.
Replace the PCI-config registers save/restore with pci_disable_msi() on
suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com
(cherry picked from commit 235fdbc32d)
Fix gnome-shell (and other page-flip users) hanging after suspend/resume
because of the gma500's IRQs not working.
This fixes 2 problems with the IRQ handling:
1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but
gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which
do not call request_irq. Replace the pre- + post-install calls with
gma_irq_install() which does prep + request + post.
2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel
Atom N2600, cedarview) netbook.
Cederview uses MSI interrupts and it seems that the BIOS re-configures
things back to normal APIC based interrupts during S3 suspend. There is
some MSI PCI-config registers save/restore code which tries to deal with
this, but on the Packard Bell Dot SC this is not sufficient to restore
MSI IRQ functionality after a suspend/resume.
Replace the PCI-config registers save/restore with pci_disable_msi() on
suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com
On some new laptop designs a new Nvidia specific WMI interface is present
which gives info about panel brightness control and may allow controlling
the brightness through this interface when the embedded controller is used
for brightness control.
When this WMI interface is present and indicates that the EC is used,
then this interface should be used for brightness control.
Changes in v2:
- Use the new shared nvidia-wmi-ec-backlight.h header for the
WMI firmware API definitions
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Changes in v3:
- Use WMI_BRIGHTNESS_GUID define
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-8-ville.syrjala@linux.intel.com
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
