Before we add the second step of the MTL HuC auth (via GSC), we need to
have the ability to differentiate between them. To do so, the huc
authentication check is duplicated for GuC and GSC auth, with
GSC-enabled binaries being considered fully authenticated only after
the GSC auth step.
To report the difference between the 2 auth steps, a new case is added
to the HuC getparam. This way, the clear media driver can start
submitting before full auth, as partial auth is enough for those
workloads.
v2: fix authentication status check for DG2
v3: add a better comment at the top of the HuC file to explain the
different approaches to load and auth (John)
v4: update call to intel_huc_is_authenticated in the pxp code to check
for GSC authentication
v5: drop references to meu and esclamation mark in huc_auth print (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-5-daniele.ceraolospurio@intel.com
In the previous patch we extracted the offset of the legacy-style HuC
binary located within the GSC-enabled blob, so now we can use that to
load the HuC via DMA if the fuse is set that way.
Note that we now need to differentiate between "GSC-enabled binary" and
"loaded by GSC", so the former case has been renamed to "has GSC headers"
for clarity, while the latter is now based on the fuse instead of the
binary format. This way, all the legacy load paths are automatically
taken (including the auth by GuC) without having to implement further
code changes.
v2: s/is_meu_binary/has_gsc_headers/, clearer logs (John)
v3: split check for GSC access, better comments (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-4-daniele.ceraolospurio@intel.com
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
Given that HuC load is delayed on DG2, this patch adds support for a fence
that can be used to wait for load completion. No waiters are added in this
patch (they're coming up in the next one), to keep the focus of the
patch on the tracking logic.
The full HuC loading flow on boot DG2 is as follows:
1) i915 exports the GSC as an aux device;
2) the mei-gsc driver is loaded on the aux device;
3) the mei-pxp component is loaded;
4) mei-pxp calls back into i915 and we load the HuC.
Between steps 1 and 2 there can be several seconds of gap, mainly due to
the kernel doing other work during the boot.
The resume flow is slightly different, because we don't need to
re-expose or re-probe the aux device, so we go directly to step 3 once
i915 and mei-gsc have completed their resume flow.
Here's an example of the boot timing, captured with some logs added to
i915:
[ 17.908307] [drm] adding GSC device
[ 17.915717] [drm] i915 probe done
[ 22.282917] [drm] mei-gsc bound
[ 22.938153] [drm] HuC authenticated
Also to note is that if something goes wrong during GSC HW init the
mei-gsc driver will still bind, but steps 3 and 4 will not happen.
The status tracking is done by registering a bus_notifier to receive a
callback when the mei-gsc driver binds, with a large enough timeout to
account for delays. Once mei-gsc is bound, we switch to a smaller
timeout to wait for the mei-pxp component to load.
The fence is signalled on HuC load complete or if anything goes wrong in
any of the tracking steps. Timeout are enforced via hrtimer callbacks.
v2: fix includes (Jani)
v5: gsc_notifier() remove unneeded ()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-12-daniele.ceraolospurio@intel.com
The GSC will perform both the load and the authentication, so we just
need to check the auth bit after the GSC has replied.
Since we require the PXP module to load the HuC, the earliest we can
trigger the load is during the pxp_bind operation.
Note that GSC-loaded HuC survives GT reset, so we need to just mark it
as ready when we re-init the GT HW.
V2: move setting of HuC fw error state to the failure path of the HuC
auth function, so it covers both the legacy and new auth flows
V4:
1. Fix typo in the commit message
2. style fix in intel_huc_wait_for_auth_complete()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
To be able to setup GuC submission functions during engine init we need
to commit to using GuC as soon as possible.
Currently, the only thing that can stop us from using the
microcontrollers once we've fetched the blobs is a fundamental
error (e.g. OOM); given that if we hit such an error we can't really
fall-back to anything, we can "officialize" the FW fetching completion
as the moment at which we're committing to using GuC.
To better differentiate this case, the uses_guc check, which indicates
that GuC is supported and was selected in modparam, is renamed to
wants_guc and a new uses_guc is introduced to represent the case were
we're committed to using the GuC. Note that uses_guc does still not imply
that the blob is actually loaded on the HW (is_running is the check for
that). Also, since we need to have attempted the fetch for the result
of uses_guc to be meaningful, we need to make sure we've moved away
from INTEL_UC_FIRMWARE_SELECTED.
All the GuC changes have been mirrored on the HuC for coherency.
v2: split fetch return changes and new macros to their own patches,
support HuC only if GuC is wanted, improve "used" state
description (Michal)
v3: s/wants_huc/uses_huc in uc_init_wopcm
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
