This reverts commit 1f33dc0c11.
There was a patch supposed to fix an issue of illegal attempts to free a
still active i915 VMA object when parking a GT believed to be idle,
reported by CI on 2-GT Meteor Lake. As a solution, an extra wakeref for
a Primary GT was acquired from i915_gem_do_execbuffer() -- see commit
f56fe3e917 ("drm/i915: Fix a VMA UAF for multi-gt platform").
However, that fix occurred insufficient -- the issue was still reported by
CI. That wakeref was released on exit from i915_gem_do_execbuffer(), then
potentially before completion of the request and deactivation of its
associated VMAs. Moreover, CI reports indicated that single-GT platforms
also suffered sporadically from the same race.
Since that issue was fixed by another commit f3c71b2ded ("drm/i915/vma:
Fix UAF on destroy against retire race"), the changes introduced by that
insufficient fix were dropped as no longer useful. However, that series
resulted in another VMA UAF scenario now being triggered in CI.
<4> [260.290809] ------------[ cut here ]------------
<4> [260.290988] list_del corruption. prev->next should be ffff888118c5d990, but was ffff888118c5a510. (prev=ffff888118c5a510)
<4> [260.291004] WARNING: CPU: 2 PID: 1143 at lib/list_debug.c:62 __list_del_entry_valid_or_report+0xb7/0xe0
..
<4> [260.291055] CPU: 2 PID: 1143 Comm: kms_plane Not tainted 6.9.0-rc2-CI_DRM_14524-ga25d180c6853+ #1
<4> [260.291058] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<4> [260.291060] RIP: 0010:__list_del_entry_valid_or_report+0xb7/0xe0
...
<4> [260.291087] Call Trace:
<4> [260.291089] <TASK>
<4> [260.291124] i915_vma_reopen+0x43/0x80 [i915]
<4> [260.291298] eb_lookup_vmas+0x9cb/0xcc0 [i915]
<4> [260.291579] i915_gem_do_execbuffer+0xc9a/0x26d0 [i915]
<4> [260.291883] i915_gem_execbuffer2_ioctl+0x123/0x2a0 [i915]
...
<4> [260.292301] </TASK>
...
<4> [260.292506] ---[ end trace 0000000000000000 ]---
<4> [260.292782] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6ca3: 0000 [#1] PREEMPT SMP NOPTI
<4> [260.303575] CPU: 2 PID: 1143 Comm: kms_plane Tainted: G W 6.9.0-rc2-CI_DRM_14524-ga25d180c6853+ #1
<4> [260.313851] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<4> [260.326359] RIP: 0010:eb_validate_vmas+0x114/0xd80 [i915]
...
<4> [260.428756] Call Trace:
<4> [260.431192] <TASK>
<4> [639.283393] i915_gem_do_execbuffer+0xd05/0x26d0 [i915]
<4> [639.305245] i915_gem_execbuffer2_ioctl+0x123/0x2a0 [i915]
...
<4> [639.411134] </TASK>
...
<4> [639.449979] ---[ end trace 0000000000000000 ]---
We defer actually closing, unbinding and destroying a VMA until next idle
point, or until the object is freed in the meantime. By postponing the
unbind, we allow for the VMA to be reopened by the client, avoiding the
work required to rebind the VMA.
Starting from commit b0647a5e79 ("drm/i915: Avoid live-lock with
i915_vma_parked()"), we assume that as long as a GT is held idle, no VMA
would be reopened while we destroy them. That assumption is no longer
true in multi-GT configurations, where a VMA we reopen may be handled by a
GT different from the one that we already keep active via its engine while
we set up an execbuf request.
Restoring the extra GT0 PM wakeref removed from i915_gem_do_execbuffer()
processing path seems to fix this issue.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10608
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Fixes: 1f33dc0c11 ("drm/i915: Remove extra multi-gt pm-references")
Link: https://patchwork.freedesktop.org/patch/msgid/20240506180253.96858-2-janusz.krzysztofik@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to
backlight BDB data. Commit 700034566d ("drm/i915/bios: Define more BDB
contents") updated the backlight BDB data accordingly. This broke the
parsing of backlight BDB data in VBT for versions 236 - 238 (both
inclusive) and hence the backlight controls are not responding on units
with the concerned BDB version.
backlight_control information has been present in backlight BDB data
from at least BDB version 191 onwards, if not before. Hence this patch
extracts the backlight_control information for BDB version 191 or newer.
Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236).
Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251).
v2: removed checking the block size of the backlight BDB data
[vsyrjala: this is completely safe thanks to commit e163cfb4c9
("drm/i915/bios: Make copies of VBT data blocks")]
Fixes: 700034566d ("drm/i915/bios: Define more BDB contents")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit c286f6a973)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to
backlight BDB data. Commit 700034566d ("drm/i915/bios: Define more BDB
contents") updated the backlight BDB data accordingly. This broke the
parsing of backlight BDB data in VBT for versions 236 - 238 (both
inclusive) and hence the backlight controls are not responding on units
with the concerned BDB version.
backlight_control information has been present in backlight BDB data
from at least BDB version 191 onwards, if not before. Hence this patch
extracts the backlight_control information for BDB version 191 or newer.
Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236).
Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251).
v2: removed checking the block size of the backlight BDB data
[vsyrjala: this is completely safe thanks to commit e163cfb4c9
("drm/i915/bios: Make copies of VBT data blocks")]
Fixes: 700034566d ("drm/i915/bios: Define more BDB contents")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Display code uses IS_BATTLEMAGE macro but the platform support doesn't
exist in i915. So fake IS_BATTLEMAGE macro defined to enable building
i915 code. We should make sure the macro parameter is used in the
always-false expression so that we don't run into "unused variable"
warnings from i915 builds if the IS_BATTLEMAGE() check is the only place
the i915 pointer gets used in a function.
While we're at it, also update the IS_LUNARLAKE macro to include the
parameter in the false expression for consistency.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-3-radhakrishna.sripada@intel.com
With HDMI monitors we bumped up a case where the crtc clock rate
caused a mismatch on state verification. This was due to
assumption that the SW clock rate from PLL structure would match
the calculated counterpart from HW. This is not necessarily always
the case and therefore we would actually need to recalculate the
clock rate from SW PLL parameters. Then these SW and HW crtc clock
rates can be compared with each other.
The patch recalculates the crtc clock rate for SW state based on
SW PLL parameters and compares the crtc clock rate calculated
from the parameters found from the HW.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502131716.504616-1-mika.kahola@intel.com
On bdw-glk the sync->async flip change takes an extra frame due to
the double buffering behaviour of the async flip plane control bit.
Since on skl+ we are now explicitly converting the first async flip
to a sync flip (in order to allow changing the modifier and/or
ddb/watermarks) we are now taking two extra frames until async flips
are actually active. We can drop that back down to one frame by
setting the async flip bit already during the sync flip.
Note that on bdw we don't currently do the extra sync flip (see
intel_plane_do_async_flip()) so technically we wouldn't have
to deal with this in i9xx_plane_update_arm(). But I added the
relevant snippet of code there as well, just in case we ever
decide to go for the extra sync flip on pre-skl platforms as
well (we might, for example, want to change the fb stride).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430095639.26390-5-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
With Xorg+modesetting on skl+ we see the following behaviour:
1. root pixmap is X-tiled
2. client submitted buffers can be Y-tiled (w/ 'Option "dmabuf_capable"')
3. we try to switch from the X-tiled buffer to the Y-tiled buffer
using an async flip (when vsync is disabled).
4. the async flip will be rejected by i915 due to the modifier change
Relax the rules a bit by turning the first async flip into a sync
flip so that we can change the modifier if necessary. Note that
we already convert the first async flip into a sync flip on adl+
in order to reprogram the watermarks.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430095639.26390-4-ville.syrjala@linux.intel.com
