During initalization of the DisplayPort controller an EV_HPD_INIT_SETUP
event is generated, but with a delay of 100 units. This delay existed to
circumvent bug in the QMP combo PHY driver, where if the DP part was
powered up before USB, the common properties would not be properly
initialized - and USB wouldn't work.
This issue was resolved in the recent refactoring of the QMP driver,
so it's now possible to remove this delay.
While there is still a timing dependency in the current implementation,
test indicates that it's now possible to boot with an external display
on USB Type-C and have the display power up, without disconnecting and
reconnecting the cable.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518729/
Link: https://lore.kernel.org/r/20230117172951.2748456-1-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In the event that the topology requests resources that have not been
created by the system (because they are typically not represented in
dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC
blocks, until their allocation/assignment is being sanity-checked in
"drm/msm/dpu: Reject topologies for which no DSC blocks are available")
remain NULL but will still be returned out of
dpu_rm_get_assigned_resources, where the caller expects to get an array
containing num_blks valid pointers (but instead gets these NULLs).
To prevent this from happening, where null-pointer dereferences
typically result in a hard-to-debug platform lockup, num_blks shouldn't
increase past NULL blocks and will print an error and break instead.
After all, max_blks represents the static size of the maximum number of
blocks whereas the actual amount varies per platform.
^1: which can happen after a git rebase ended up moving additions to
_dpu_cfg to a different struct which has the same patch context.
Fixes: bb00a452d6 ("drm/msm/dpu: Refactor resource manager")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517636/
Link: https://lore.kernel.org/r/20230109231556.344977-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Change idle freq clamping back to the direct method, bypassing PM QoS
requests. The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle. The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.
This partially reverts commit 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device. This also mostly undoes commit 78f815c1cf ("drm/msm: return the
average load over the polling period")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
msm-fixes for v6.3-rc4
Display Fixes:
- Fix the documentation for dpu_encoder_phys_wb_init() and
dpu_encoder_phys_wb_setup_fb() APIs to address doc warnings
- Remove vcca-supply and vdds-supply as mandatory for 14nm PHY and
10nm PHY DT schemas respectively as they are not present on some
SOCs using these PHYs
- Add the dsi-phy-regulator-ldo-mode to dsi-phy-28nm.yaml as it was
missed out during txt to yaml migration
- Remove operating-points-v2 and power-domain as a required property
for the DSI controller as thats not the case for every SOC
- Fix the description from display escape clock to display core
clock in the dsi controller yaml
- Fix the memory leak for mdp1-mem path for the cases when we return
early after failing to get mdp0-mem ICC paths for msm
- Fix error handling path in msm_hdmi_dev_probe() to release the phy
ref count when devm_pm_runtime_enable() fails
- Fix the dp_aux_isr() routine to make sure it doesnt incorrectly
signal the aux transaction as complete if the ISR was not an AUX
isr. This fixes a big hitter stability bug on chromebooks.
- Add protection against null pointer dereference when there is no
kms object as in the case of headless adreno GPU in the shutdown
path.
GPU Fixes:
- a5xx: fix quirks to actually be a bitmask and not overwrite each
other
- a6xx: fix gx halt sequence to avoid 1000ms hang on some devices
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv7=in_MHW3kdkhqh7ZFoVCmnikmr29YYHCXR=7aOEneg@mail.gmail.com
Resource allocation of DSC blocks should behave more like LMs and CTLs
where NULL resources (based on initial hw_blk creation via definitions
in the catalog) are skipped ^1. The current hardcoded mapping of DSC
blocks however means that resource allocation shouldn't succeed at all
when the DSC block on the corresponding index doesn't exist, rather than
searching for the next free block.
This hardcoded mapping should be loosened separately as DPU 5.0.0
introduced a crossbar where DSC blocks can be "somewhat" freely bound to
any PP and CTL (in proper pairs).
^1: which, on hardware that supports DSC, can happen after a git rebase
ended up moving additions to _dpu_cfg to a different struct which has
the same patch context.
Fixes: f2803ee91a ("drm/msm/disp/dpu1: Add DSC support in RM")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515684/
Link: https://lore.kernel.org/r/20221221231943.1961117-6-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
According to downstream the value to use for WORD_COUNT is
bytes_per_pkt, which denotes the number of bytes in a packet based on
how many slices have been configured by the panel driver times the
width of a slice times the number of bytes per pixel.
The DSC panels seen thus far use one byte per pixel, only one slice
per packet, and a slice width of half the panel width leading to the
desired bytes_per_pkt+1 value to be equal to hdisplay/2+1. This however
isn't the case anymore for panels that configure two slices per packet,
where the value should now be hdisplay+1.
Note that the aforementioned panel (on a Sony Xperia XZ3, sdm845) with
slice_count=1 has also been tested to successfully accept slice_count=2,
which would have shown corrupted output previously.
Fixes: 08802f515c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515694/
Link: https://lore.kernel.org/r/20221221231943.1961117-3-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
During kexec on ARM device, we notice that device_shutdown() only calls
pm_runtime_force_suspend() while shutting down the GPU. This means the GPU
kthread is still running and further, there maybe active submits.
This causes all kinds of issues during a kexec reboot:
Warning from shutdown path:
[ 292.509662] WARNING: CPU: 0 PID: 6304 at [...] adreno_runtime_suspend+0x3c/0x44
[ 292.509863] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
[ 292.509872] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 292.509881] pc : adreno_runtime_suspend+0x3c/0x44
[ 292.509891] lr : pm_generic_runtime_suspend+0x30/0x44
[ 292.509905] sp : ffffffc014473bf0
[...]
[ 292.510043] Call trace:
[ 292.510051] adreno_runtime_suspend+0x3c/0x44
[ 292.510061] pm_generic_runtime_suspend+0x30/0x44
[ 292.510071] pm_runtime_force_suspend+0x54/0xc8
[ 292.510081] adreno_shutdown+0x1c/0x28
[ 292.510090] platform_shutdown+0x2c/0x38
[ 292.510104] device_shutdown+0x158/0x210
[ 292.510119] kernel_restart_prepare+0x40/0x4c
And here from GPU kthread, an SError OOPs:
[ 192.648789] el1h_64_error+0x7c/0x80
[ 192.648812] el1_interrupt+0x20/0x58
[ 192.648833] el1h_64_irq_handler+0x18/0x24
[ 192.648854] el1h_64_irq+0x7c/0x80
[ 192.648873] local_daif_inherit+0x10/0x18
[ 192.648900] el1h_64_sync_handler+0x48/0xb4
[ 192.648921] el1h_64_sync+0x7c/0x80
[ 192.648941] a6xx_gmu_set_oob+0xbc/0x1fc
[ 192.648968] a6xx_hw_init+0x44/0xe38
[ 192.648991] msm_gpu_hw_init+0x48/0x80
[ 192.649013] msm_gpu_submit+0x5c/0x1a8
[ 192.649034] msm_job_run+0xb0/0x11c
[ 192.649058] drm_sched_main+0x170/0x434
[ 192.649086] kthread+0x134/0x300
[ 192.649114] ret_from_fork+0x10/0x20
Fix by calling adreno_system_suspend() in the device_shutdown() path.
[ Applied Rob Clark feedback on fixing adreno_unbind() similarly, also
tested as above. ]
Cc: Rob Clark <robdclark@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/517633/
Link: https://lore.kernel.org/r/20230109222547.1368644-1-joel@joelfernandes.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
