From testing on sc7180-trogdor devices, reading the GMU registers
needs the GMU clocks to be enabled. Those clocks get turned on in
a6xx_gmu_resume(). Confusingly enough, that function is called as a
result of the runtime_pm of the GPU "struct device", not the GMU
"struct device". Unfortunately the current a6xx_gpu_busy() grabs a
reference to the GMU's "struct device".
The fact that we were grabbing the wrong reference was easily seen to
cause crashes that happen if we change the GPU's pm_runtime usage to
not use autosuspend. It's also believed to cause some long tail GPU
crashes even with autosuspend.
We could look at changing it so that we do pm_runtime_get_if_in_use()
on the GPU's "struct device", but then we run into a different
problem. pm_runtime_get_if_in_use() will return 0 for the GPU's
"struct device" the whole time when we're in the "autosuspend
delay". That is, when we drop the last reference to the GPU but we're
waiting a period before actually suspending then we'll think the GPU
is off. One reason that's bad is that if the GPU didn't actually turn
off then the cycle counter doesn't lose state and that throws off all
of our calculations.
Let's change the code to keep track of the suspend state of
devfreq. msm_devfreq_suspend() is always called before we actually
suspend the GPU and msm_devfreq_resume() after we resume it. This
means we can use the suspended state to know if we're powered or not.
NOTE: one might wonder when exactly our status function is called when
devfreq is supposed to be disabled. The stack crawl I captured was:
msm_devfreq_get_dev_status
devfreq_simple_ondemand_func
devfreq_update_target
qos_notifier_call
qos_max_notifier_call
blocking_notifier_call_chain
pm_qos_update_target
freq_qos_apply
apply_constraint
__dev_pm_qos_update_request
dev_pm_qos_update_request
msm_devfreq_idle_work
Fixes: eadf79286a ("drm/msm: Check for powered down HW in the devfreq callbacks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/489124/
Link: https://lore.kernel.org/r/20220610124639.v4.1.Ie846c5352bc307ee4248d7cab998ab3016b85d06@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Changes in this merge:
Core:
- client utilization via fdinfo support
- fix fence rollover issue
DPU:
- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes
- enable DSPP support for sc7280
DP:
- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change
MDP5:
- MSM8953 perf data
HDMI:
- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488860/
Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is currently two function for performing reset: dsi_sw_reset and
dsi_sw_reset_restore. Only difference between those is that latter one
assumes that DSI controller is enabled. In contrary former one assumes
that controller is disabled and executed during power-on. However this
assumtion is not true mobile devices which have boot splash set up by
boot-loader.
This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable
DSI controller during reset sequence if it's enabled.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489152/
Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz
[DB: fixed the typo in the commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for writing CRC values for the interface block to
the debugfs by calling the necessary MISR setup/collect methods.
Changes since V1:
- Set values_cnt to only include phys with backing hw_intf
- Loop over all drm_encs connected to crtc
Changes since V2:
- Remove vblank.h inclusion
- Change `pos + i` to `pos + entries`
- Initialize values_cnt to 0 for encoder
- Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and
"intf" to "enc")
- Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs
- Add checks for setup_misr and collect_misr in
dpu_encoder_get_num_hw_intfs
Changes since V3:
- Remove extra whitespace
- Change "enc" to "encoder"
- Move crcs array to dpu_crtc_get_encoder_crc
- Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490736/
Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move layer mixer-specific section of dpu_crtc_get_crc() into a separate
helper method. This way, we can make it easier to get CRCs from other HW
blocks by adding other get_crc helper methods.
Changes since V1:
- Move common bitmasks to dpu_hw_util.h
- Move common CRC methods to dpu_hw_util.c
- Update copyrights
- Change crcs array to a dynamically allocated array and added it as a
member of crtc_state
Changes since V2:
- Put changes for hw_util into a separate commit
- Revert crcs array to a static array
- Add else case for set_crc_source to return EINVAL if no valid source
is selected
- Add DPU_CRTC_MAX_CRC_ENTRIES macro
Changes since V3:
- Move crcs array into dpu_crtc_get_lm_crc
- Remove comment about crcs array in dpu_crtc_state struct
- Revert `lm` rename
- Remove DPU_CRTC_MAX_CRC_ENTRIES macro
- Return EINVAL in dpu_crtc_get_crc if no valid CRC source is set
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490735/
Link: https://lore.kernel.org/r/20220622171835.7558-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
intf and wb resources are not dependent on the rm global
state so need not be allocated during dpu_encoder_virt_atomic_mode_set().
Move the allocation of intf and wb resources to dpu_encoder_setup_display()
so that we can utilize the hw caps even during atomic_check() phase.
Since dpu_encoder_setup_display() already has protection against
setting invalid intf_idx and wb_idx, these checks can now
be dropped as well.
changes in v2:
- add phys->hw_intf and phys->hw_wb checks back
changes in v3:
- correct the Fixes tag
Fixes: e02a559a72 ("drm/msm/dpu: make changes to dpu_encoder to support virtual encoder")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489885/
Link: https://lore.kernel.org/r/1655406084-17407-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add writeback support for sc7180 devices. This has been
validated on sc7180 chromebook using IGT writeback test
suite.
localhost /usr/local/libexec/igt-gpu-tools # ./kms_writeback
Starting subtest: writeback-pixel-formats
Subtest writeback-pixel-formats: SUCCESS (0.001s)
Starting subtest: writeback-invalid-parameters
Subtest writeback-invalid-parameters: SUCCESS (0.004s)
Starting subtest: writeback-fb-id
Subtest writeback-fb-id: SUCCESS (0.009s)
Starting subtest: writeback-check-output
Subtest writeback-check-output: SUCCESS (0.203s)
Adding this will increase IGT coverage on chromebooks and also
allow using writeback functionality for other use-cases as
necessary.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485787/
Link: https://lore.kernel.org/r/20220510235439.31916-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
