Continue the isolation of DRM/KMS code by moving all DRM init and
cleanup from zynqmp_dpsub.c to zynqmp_kms.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The zynqmp_disp and zynqmp_dp structures are allocated with
drmm_kzalloc(). While this simplifies management of memory, it requires
a DRM device, which will not be available at probe time when the DP
bridge will be used standalone, with a DRM device in the PL. To prepare
for this, switch to manual allocation for zynqmp_disp and zynqmp_dp. The
cleanup still uses the DRM managed infrastructure, but one level up, at
the top level. This will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
There's no need to delay bridge initialization, move it to
zynqmp_dp_probe() and drop the zynqmp_dp_drm_init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To prepare for operating as a standalone DP bridge with the DRM device
implemented in the PL, move registration of the AUX bus to bridge attach
time, as that's the earliest point when a DRM device is available.
The DRM device pointer stored in zynqmp_dp isn't used anymore, drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Decouple the planes handling from the display controller programming by
moving the corresponding code from zynqmp_disp.c to zynqmp_kms.c. This
prepares for using the DPSUB with a live video input, without creating
DRM planes in the DPSUB driver.
While at it, fix a typo in a comment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Decouple the CRTC handling from the display controller programming by
moving the corresponding code from zynqmp_disp.c to zynqmp_kms.c. This
prepares for using the DPSUB with a live video input, without creating a
DRM CRTC in the DPSUB driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Start preparation for using the DPSUB as a standalone DisplayPort
encoder without a display controller by moving the DRM/KMS
initialization to a new zynqmp_kms.c file. No functional change
intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Decouple the zynqmp_disp, which handles the hardware configuration, from
the DRM planes by moving the planes to the zynqmp_dpsub structure. The
planes handling code will be moved to a separate file in a subsequent
step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Decouple the zynqmp_disp, which handles the hardware configuration, from
the DRM CRTC by moving the CRTC to the zynqmp_dpsub structure. The CRTC
handling code will be moved to a separate file in a subsequent step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The audio clock is an external resource from the DPSUB point of view,
not a resource internal to the display controller. Move it to the
zynqmp_dpsub structure, to allow accessing it from outside the disp
code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The video clock is an external resource from the DPSUB point of view,
not a resource internal to the display controller. Move it to the
zynqmp_dpsub structure, to allow accessing it from outside the disp
code.
While at it, rename the fields from pclk and pclk_from_ps to vid_clk and
vid_clk_from_ps, to better reflect their purpose and match the
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The array of formats passed to drm_universal_plane_init() doesn't need
to outlive the function call, as it's copied internally. Use kcalloc()
instead of drmm_kcalloc() to allocate it, and free it right after usage.
While at it, move the allocation and initialization of the formats array
to a separate function, to prepare for splitting the DRM plane handling
to a separate file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Use the ARRAY_SIZE() macro to iterate over arrays, instead of hardcoding
their size. This makes the code less error-prone should the array size
change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The zynqmp_disp_layer_set_format() function only needs format
information, not a full plane state. Get the necessary info from the
plane state in the caller and pass it to zynqmp_disp_layer_set_format().
This prepares for calling the function from non-DRM code. This doesn't
introduce any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reuse the local info variable instead of going through the layer pointer
in zynqmp_disp_layer_update(). This doesn't introduce any functional
change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To prepare for control of the blender outside of the CRTC code, move the
setup of the blender to the zynqmp_disp_enable() function. This doesn't
introduce any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To prepare for usage of the clock setup function outside of the CRTC
code, replace the DRM-specific structures passed as parameters with a
pointer to the zynqmp_disp and the requested clock rate. This doesn't
introduce any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Now that the driver uses the connector bridge helper, HPD can be
reported directly for the connector through the drm_bridge_hpd_notify()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Replace the manual connector implementation and registration in the DP
encoder with the DRM connector bridge helper. This removes boilerplate
code and simplifies the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The next component in the display chain, after the DP encoder, is most
likely a DP connector. The display connector driver registers a bridge
for it. That bridge doesn't need to be controlled, but is needed in
order to use the DRM connector bridge helper. Retrieve it at init time,
and attach to it in the DP bridge attach handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
As part of the transitition of the DP encoder to a DRM bridge, turn the
DRM encoder into a dummy encoder and move it out of the DP code, to the
DPSUB core. DP encoder operations are handled by the DP bridge, which is
now attached to the encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Connector creation requires the DRM encoder, and it thus typically
performed in the bridge attach operation. Move it there, to prepare for
registration of the DRM bridge. For now the zynqmp_dp_bridge_attach() is
called manually at initialization time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To prepare for the removal of the connector from the DP encoder, pass
the display info pointer to the zynqmp_dp_set_format() function instead
of accessing the connector internally. The display info is NULL when the
function is called at initialization time, as we have no display info at
that point. This doesn't change the existing behaviour, given that the
zynqmp_dp_set_format() was already handling this as a special case (the
display info isn't initialized at init time and is all zeroes).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The DP encoder is currently modelled as a DRM encoder and DRM connector.
This doesn't support system configurations where the DP encoder is
driven by the FPGA programmable logic, using the live video input to the
DP subsystem. To enable such use cases, we need to model the encoder as
a DRM bridge.
As a first step, create a DRM bridge in the DP encoder driver. Move and
delegate the implementation of the DRM encoder and connector operations
to the bridge to prepare for the transition. The bridge will be
registered with the DRM core as a separate change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The zynqmp_dp_encoder_mode_set_transfer_unit() function takes a mode
pointer argument that it doesn't need to modify. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To prepare for the transition to the DRM bridge API, switch the encoder
operations to the atomic versions of .enable() and .disable(). This
doesn't cause any functional change by itself.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.
Hence, rename the field to dma_addr, which is more applicable.
In order to do this renaming the following coccinelle script was used:
```
@@
struct drm_gem_dma_object *gem;
@@
- gem->paddr
+ gem->dma_addr
@@
struct drm_gem_dma_object gem;
@@
- gem.paddr
+ gem.dma_addr
@exists@
typedef dma_addr_t;
symbol paddr;
@@
dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>
@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;
```
This patch is compile-time tested with:
```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.
Besides that, commit e57924d4ae ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Update all related Kconfig and Makefile rules.
Besides the existing code for DisplayPort, the new module will
contain helpers for other video-output standards, such as HDMI.
Drivers will have to select their required video-output helpers.
Linking all display-related code into a single module avoids the
proliferation of small kernel modules.
The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz,
and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace
to drm_display_helper.
v2:
* mention module parameters in commit message (Javier)
* distiguish between display module and DP support in Kconfig
* update Makefile rules for DP helpers
* move Kconfig rules into separate file under display/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[airlied: add two missing Kconfig]
drm-misc-next for v5.18:
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
Move DisplayPort functions into a separate module to reduce the size
of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To
avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c
This change can help to reduce the size of the kernel binary. Some
numbers from a x86-64 test build:
Before:
drm_kms_helper.ko: 447480 bytes
After:
drm_dp_helper.ko: 216632 bytes
drm_kms_helper.ko: 239424 bytes
For early-boot graphics, generic DRM drivers, such as simpledrm,
require DRM KMS helpers to be built into the kernel. Generic helper
functions for DisplayPort take up a significant portion of DRM KMS
helper library. These functions are not used by generic drivers and
can be loaded as a module.
v3:
* fix include statement in DRM selftests
v2:
* move DP helper code into dp/ (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-4-tzimmermann@suse.de
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
The display driver wants to pass a custom flag to the DMA engine driver,
which it started doing by using the slave_id field that was traditionally
used for a different purpose.
As there is no longer a correct use for the slave_id field, it should
really be removed, and the remaining users changed over to something
different.
The new mechanism for passing nonstandard settings is using the
.peripheral_config field, so use that to pass a newly defined structure
here, making it clear that this will not work in portable drivers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-10-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS helpers and CMA will now automatically enable CMA KMS helpers.
Some drivers' Kconfig files did not correctly select KMS or CMA helpers.
Fix this as part of the change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/xlnx/zynqmp_disp.c:101: warning: expecting prototype for enum zynqmp_disp_id. Prototype was for enum zynqmp_disp_layer_id instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
While the DPSUB has a fixed plane order, it still makes sense to expose
it to userspace to avoid hardcoding assumptions. Do so by adding an
immutable zpos property to planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The graphics plane has a global alpha setting. Expose it through the
plane's alpha property.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To display the graphics layer, the global alpha needs to be enabled.
Enable it when the graphics plane is enabled (with full opacity), and
disable it otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The internal functions dealing with the audio/video buffer manager, the
blender, and the audio mixer, all receive pointers to the respective
objects. Those objects are embedded in the zynqmp_disp structure, and a
very small. Treating them as separate objects would require expanding
them with back-pointers to the zynqmp_disp in order to access fields
such as the device pointer for debug messages, and this isn't worth it.
Instead, merge those structures with the zynqmp_disp structure, and pass
the zynqmp_disp pointer to all internal functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
