Prior to commit dc6fcaaba5 ("drm/omap: Allow build with
COMPILE_TEST=y"), it was only possible to build the omapdrm driver with
a 4KB page size. After that change, when the PAGE_SIZE is 64KB or
larger, clang points out that the driver has some assumptions around the
page size implicitly by passing PAGE_SIZE to a parameter with a type of
u16:
drivers/gpu/drm/omapdrm/omap_gem.c:758:7: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
757 | block = tiler_reserve_2d(fmt, omap_obj->width, omap_obj->height,
| ~~~~~~~~~~~~~~~~
758 | PAGE_SIZE);
| ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
drivers/gpu/drm/omapdrm/omap_gem.c:1504:44: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
1504 | block = tiler_reserve_2d(fmts[i], w, h, PAGE_SIZE);
| ~~~~~~~~~~~~~~~~ ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
2 errors generated.
As there is a lot of use of a u16 type throughout this driver and it
will only ever be run on hardware that has a 4KB page size, just
restrict compile testing to when the page size is less than 64KB (as no
other issues have been discussed and it keeps compile testing relatively
more available).
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620-omapdrm-restrict-compile-test-to-sub-64kb-page-size-v1-1-5e56de71ffca@kernel.org
When the PCI devres API was introduced to this driver, it was wrongly
assumed that initializing the device with pcim_enable_device() instead of
pci_enable_device() will make all PCI functions managed.
This is wrong and was caused by the quite confusing PCI devres API in which
some, but not all, functions become managed that way.
The function pci_iomap_range() is never managed.
Replace pci_iomap_range() with the managed function pcim_iomap_range().
Fixes: 8558de401b ("drm/vboxvideo: use managed pci functions")
Link: https://lore.kernel.org/r/20240613115032.29098-14-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
(cherry picked from commit 8169b2097d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sometimes the system [1] hangs on x86 I/O machine checks. However, the
expected behavior is to reboot the system, as the machine check handler
ultimately triggers a panic(), initiating a reboot in the last step.
The root cause is that sometimes the panic() is blocked when
drm_fb_helper_damage() invoking schedule_work() to flush the frame buffer.
This occurs during the process of flushing all messages to the frame
buffer driver as shown in the following call trace:
Machine check occurs [2]:
panic()
console_flush_on_panic()
console_flush_all()
console_emit_next_record()
con->write()
vt_console_print()
hide_cursor()
vc->vc_sw->con_cursor()
fbcon_cursor()
ops->cursor()
bit_cursor()
soft_cursor()
info->fbops->fb_imageblit()
drm_fbdev_generic_defio_imageblit()
drm_fb_helper_damage_area()
drm_fb_helper_damage()
schedule_work() // <--- blocked here
...
emergency_restart() // wasn't invoked, so no reboot.
During panic(), except the panic CPU, all the other CPUs are stopped.
In schedule_work(), the panic CPU requires the lock of worker_pool to
queue the work on that pool, while the lock may have been token by some
other stopped CPU. So schedule_work() is blocked.
Additionally, during a panic(), since there is no opportunity to execute
any scheduled work, it's safe to fix this issue by skipping schedule_work()
on 'oops_in_progress' in drm_fb_helper_damage().
[1] Enable the kernel option CONFIG_FRAMEBUFFER_CONSOLE,
CONFIG_DRM_FBDEV_EMULATION, and boot with the 'console=tty0'
kernel command line parameter.
[2] Set 'panic_timeout' to a non-zero value before calling panic().
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Yudong Wang <yudong.wang@intel.com>
Tested-by: Yudong Wang <yudong.wang@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703141737.75378-1-qiuxu.zhuo@intel.com
Signed-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
When the `power_saving_policy` property is set to bit mask
"Require color accuracy" ABM should be disabled immediately and
any requests by sysfs to update will return an -EBUSY error.
When the `power_saving_policy` property is set to bit mask
"Require low latency" PSR should be disabled.
When the property is restored to an empty bit mask ABM and PSR
can be enabled again.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703051722.328-3-mario.limonciello@amd.com
The problem case is as follows:
1. GPU A triggers a gpu ras reset, and GPU A drives
GPU B to also perform a gpu ras reset.
2. After gpu B ras reset started, gpu B queried a DE
data. Since the DE data was queried in the ras reset
thread instead of the page retirement thread, bad
page retirement work would not be triggered. Then
even if all gpu resets are completed, the bad pages
will be cached in RAM until GPU B's bad page retirement
work is triggered again and then saved to eeprom.
This patch can save the bad pages to eeprom in time after gpu
ras reset is completed.
v2:
1. Add the above description to code comments.
2. Reuse existing function.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before uninstalling gpu driver, flush all cached ras
bad pages to eeprom.
v2:
Put the same code into a function and reuse the function.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX12.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable mesa to use display dcc, DM should expose them in the
supported modifiers. Add the best (most efficient) modifiers first.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX11.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX10.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
If the reg mmMP1_SMN_C2PMSG_90 is being written to during amdgpu driver
load or driver unload, subsequent amdgpu driver load will fail at
smu_hw_init. The default of mmMP1_SMN_C2PMSG_90 register at a clean
environment is 0x1 and if value differs from expected, amdgpu driver
load will fail.
How to fix:
Ignore the initial value in smu response register before the first smu
message is sent,if smc in SMU_FW_INIT state, just proceed further to
send the message. If register holds an unexpected value after smu message
was sent set, smc_state to SMU_FW_HANG state and no further smu messages
will be sent.
v2:
Set SMU_FW_INIT state at the start of smu hw_init/resume.
Check smc_fw_state before sending smu message if in hang state skip
sending message.
Set SMU_FW_HANG only in case unexpected value is detected
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SOCs with GFX v9.4.3, a VF may have multiple compute partitions.
Fetch the partition information during init and initialize partition
nodes. There is no support to switch partition mode in VF mode, hence
disable the same.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma has 2 instances in SRIOV cpx mode. Odd numbered VFs have
sdma0/sdma1 instances. Even numbered vfs have sdma2/sdma3. For
Even numbered vfs, the sdma2 & sdma3 (irq srouce id
CLIENTID_SDMA2 and CLIENTID_SDMA3) should map to irq seq 0 & 1.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add qxl_bo_pin_and_vmap() that pins and vmaps a buffer object in one
step. Update callers of the regular qxl_bo_vmap(). Fixes a bug where
qxl accesses an unpinned buffer object while it is being moved; such
as with the monitor-description BO. An typical error is shown below.
[ 4.303586] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.586883] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.904036] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65335296x16777216+0+0
[ 5.374347] [drm:qxl_release_from_id_locked] *ERROR* failed to find id in release_idr
Commit b33651a5c9 ("drm/qxl: Do not pin buffer objects for vmap")
removed the implicit pin operation from qxl's vmap code. This is the
correct behavior for GEM and PRIME interfaces, but the pin is still
needed for qxl internal operation.
Also add a corresponding function qxl_bo_vunmap_and_unpin() and remove
the old qxl_bo_vmap() helpers.
Future directions: BOs should not be pinned or vmapped unnecessarily.
The pin-and-vmap operation should be removed from the driver and a
temporary mapping should be established with a vmap_local-like helper.
See the client helper drm_client_buffer_vmap_local() for semantics.
v2:
- unreserve BO on errors in qxl_bo_pin_and_vmap() (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b33651a5c9 ("drm/qxl: Do not pin buffer objects for vmap")
Reported-by: David Kaplan <david.kaplan@amd.com>
Closes: https://lore.kernel.org/dri-devel/ab0fb17d-0f96-4ee6-8b21-65d02bb02655@suse.de/
Tested-by: David Kaplan <david.kaplan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708142208.194361-1-tzimmermann@suse.de
