The device property APIs designed that way that they will return an error when
there is no valid fwnode provided. Moreover, the check for NULL of dev_fwnode()
is not fully correct as in some (currently rare) cases it may contain an error
pointer. This is not a problem anyway (see keyword 'valid' above) that's why
the code works properly even without this change.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240826212344.866928-3-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ODRs accessible only in low-power mode. Switch automatically to
low-power or low-noise depending on the ODR set.
Add channel attributes "power_mode" and "power_mode_available" for
setting the power mode to use (low-noise or low-power) for ODRs
supporting both mode. Reading "power_mode" when the sensor is on
will return the actual mode and not the requested one. It will be
different when using ODRs not supported by the requested mode.
Use low-power mode by default.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240605195949.766677-3-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADIS16545 and ADIS16547 are a complete inertial system that
includes a triaxis gyroscope and a triaxis accelerometer.
The serial peripheral interface (SPI) and register structure provide a
simple interface for data collection and configuration control.
These devices are similar to the ones already supported in the driver,
with changes in the scales, timings and the max spi speed in burst
mode.
Also, they support delta angle and delta velocity readings in burst
mode, for which support was added in the trigger handler.
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-5-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for delta angle and delta velocity raw readings to
adis16480 driver.
The following devices do not support delta readings in burst mode:
ADIS16375, ADIS16480, ADIS16485, ADIS16488, ADIS16490, ADIS16495-1,
ADIS16495-2, ADIS16495-3, ADIS16497-1, ADIS16497-2, ADIS16497-3, thus
they cannot be retrieved via the buffer interface.
For these devices, the delta measurements are retrieved by performing
normal register readings and are made available through the raw
attributes of the specific channels.
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-3-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Re-define ADIS16475_DATA such that it takes _burst_max_len,
_burst_max_speed_hz and _has_fifo as parameters.
Also, do a preparatory rename operation for ADIS16475_BURST32_MAX_DATA
to ADIS16475_BURST32_MAX_DATA_NO_TS32 to be able to differentiate in
the future between devices which are using 16-bit or 32-bit timestamp
size in burst mode.
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-8-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently, adis library allows configuration only for edge interrupts,
needed for data ready sampling.
This patch removes the restriction for level interrupts for devices
which have FIFO support.
Furthermore, in case of devices which have FIFO support,
devm_request_threaded_irq is used for interrupt allocation, to avoid
flooding the processor with the FIFO watermark level interrupt, which
is active until enough data has been read from the FIFO.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-7-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IRQ ONESHOT flag to ensure the timestamp is not updated in the
hard handler during the thread handler. And use a fixed value of 1
sample that correspond to this first timestamp.
This way we can ensure the timestamp is always corresponding to the
value used by the timestamping mechanism. Otherwise, it is possible
that between FIFO count read and FIFO processing the timestamp is
overwritten in the hard handler.
Fixes: 111e1abd00 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240527150117.608792-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IRQF_ONESHOT flag to ensure the timestamp is not updated in the
hard handler during the thread handler. And compute and use the
effective watermark value that correspond to this first timestamp.
This way we can ensure the timestamp is always corresponding to the
value used by the timestamping mechanism. Otherwise, it is possible
that between FIFO count read and FIFO processing the timestamp is
overwritten in the hard handler.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240529154717.651863-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
99a741aa7a2d ("i2c: mux: gpio: remove support for class-based device
instantiation") removed the last call to i2c_mux_add_adapter() with a
non-null class argument. Therefore the class argument can be removed.
Note: Class-based device instantiation is a legacy mechanism which
shouldn't be used in new code, so we can rule out that this argument
may be needed again in the future.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When a sensor is running and there is a FIFO frequency change due to
another sensor turned on/off, there are glitches on timestamp. Fix that
by using only interrupt timestamp when there is the corresponding sensor
data in the FIFO.
Delete FIFO period handling and simplify internal functions.
Update integration inside inv_mpu6050 and inv_icm42600 drivers.
Fixes: 0ecc363cce ("iio: make invensense timestamp module generic")
Cc: Stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
