Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The destination buffer flags are assigned twice but source is not set in
what looks like a copy+paste mistake. Assign the source queue flags so
the 32-bit DMA limitation is handled consistently.
Fixes: ec9ef8dda2 ("media: rockchip: rga: set dma mask to 32 bits")
Cc: <stable@vger.kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
tda18271_lookup_map() may return negative error code, but
tda18271c2_rf_tracking_filters_correction() doesn't check it
as the other callers.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the wait_prepare or wait_finish callback is set, then call it.
If it is NULL and the queue lock pointer is not NULL, then just
unlock/lock that mutex.
This allows simplifying drivers by dropping the wait_prepare and
wait_finish ops (and eventually the vb2_ops_wait_prepare/finish helpers).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add two new checks:
1) wait_prepare and wait_finish callbacks are either both present or
both unset, you can't mix.
2) if lock == NULL, then wait_prepare (and due to check 1 also
wait_finish) must be present.
These checks should prevent the case where lock == NULL, but there
is no way to release/reacquire whatever lock is used when waiting
for a buffer to arrive in VIDIOC_DQBUF.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The vb2_queue_init() will expect the vb2_queue lock pointer to be set in
the future. So for those drivers that set the lock later, move it up to
before the vb2_queue_init() call.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The vb2_queue_init() will expect the vb2_queue lock pointer to be set in
the future. So for those drivers that set the lock later, move it up to
before the vb2_queue_init() call.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The vb2_queue_init() will expect the vb2_queue lock pointer to be set in
the future. So for those drivers that set the lock later, move it up to
before the vb2_queue_init() call.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The vb2_queue_init() will expect the vb2_queue lock pointer to be set in
the future. So for those drivers that set the lock later, move it up to
before the vb2_queue_init() call.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without these ops the v4l2-compliance blocking wait test will fail.
These ops are required to ensure that when VIDIOC_DQBUF has to
wait for buffers to arrive, the queue lock is correctly released
and retaken. Otherwise the wait for a buffer would block all other
queue ioctls.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without these ops the v4l2-compliance blocking wait test will fail.
These ops are required to ensure that when VIDIOC_DQBUF has to
wait for buffers to arrive, the queue lock is correctly released
and retaken. Otherwise the wait for a buffer would block all other
queue ioctls.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without these ops the v4l2-compliance blocking wait test will fail.
These ops are required to ensure that when VIDIOC_DQBUF has to
wait for buffers to arrive, the queue lock is correctly released
and retaken. Otherwise the wait for a buffer would block all other
queue ioctls.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add new helpers to export received or transmitted HDMI InfoFrames to
debugfs.
This complements similar code in drm where the transmitted HDMI infoframes
are exported to debugfs.
The same names have been used as in drm, so this is consistent.
The exported infoframes can be parsed with the edid-decode utility.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This new function returns the dentry of the top-level debugfs "v4l2"
directory. If it does not exist yet, then it is created first.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero
unique ID.
```
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
```
So, deny allocating an entity with ID 0 or an ID that belongs to a unit
that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due
to a chain of entities referring to themselves. In one particular case, an
Output Unit is connected to an Input Unit, both with the same ID of 1. But
when looking up for the source ID of the Output Unit, that same entity is
found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID
was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[ 20.830206] usb 1-1: Using ep0 maxpacket: 8
[ 20.833501] usb 1-1: config 0 descriptor??
[ 21.038518] usb 1-1: string descriptor 0 read error: -71
[ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201)
[ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized!
[ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized!
[ 21.042218] ------------[ cut here ]------------
[ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0
[ 21.043195] Modules linked in:
[ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444
[ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 21.044639] Workqueue: usb_hub_wq hub_event
[ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0
[ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00
[ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246
[ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1
[ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290
[ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000
[ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003
[ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000
[ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0
[ 21.051136] PKRU: 55555554
[ 21.051331] Call Trace:
[ 21.051480] <TASK>
[ 21.051611] ? __warn+0xc4/0x210
[ 21.051861] ? media_create_pad_link+0x2c4/0x2e0
[ 21.052252] ? report_bug+0x11b/0x1a0
[ 21.052540] ? trace_hardirqs_on+0x31/0x40
[ 21.052901] ? handle_bug+0x3d/0x70
[ 21.053197] ? exc_invalid_op+0x1a/0x50
[ 21.053511] ? asm_exc_invalid_op+0x1a/0x20
[ 21.053924] ? media_create_pad_link+0x91/0x2e0
[ 21.054364] ? media_create_pad_link+0x2c4/0x2e0
[ 21.054834] ? media_create_pad_link+0x91/0x2e0
[ 21.055131] ? _raw_spin_unlock+0x1e/0x40
[ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210
[ 21.055837] uvc_mc_register_entities+0x358/0x400
[ 21.056144] uvc_register_chains+0x1fd/0x290
[ 21.056413] uvc_probe+0x380e/0x3dc0
[ 21.056676] ? __lock_acquire+0x5aa/0x26e0
[ 21.056946] ? find_held_lock+0x33/0xa0
[ 21.057196] ? kernfs_activate+0x70/0x80
[ 21.057533] ? usb_match_dynamic_id+0x1b/0x70
[ 21.057811] ? find_held_lock+0x33/0xa0
[ 21.058047] ? usb_match_dynamic_id+0x55/0x70
[ 21.058330] ? lock_release+0x124/0x260
[ 21.058657] ? usb_match_one_id_intf+0xa2/0x100
[ 21.058997] usb_probe_interface+0x1ba/0x330
[ 21.059399] really_probe+0x1ba/0x4c0
[ 21.059662] __driver_probe_device+0xb2/0x180
[ 21.059944] driver_probe_device+0x5a/0x100
[ 21.060170] __device_attach_driver+0xe9/0x160
[ 21.060427] ? __pfx___device_attach_driver+0x10/0x10
[ 21.060872] bus_for_each_drv+0xa9/0x100
[ 21.061312] __device_attach+0xed/0x190
[ 21.061812] device_initial_probe+0xe/0x20
[ 21.062229] bus_probe_device+0x4d/0xd0
[ 21.062590] device_add+0x308/0x590
[ 21.062912] usb_set_configuration+0x7b6/0xaf0
[ 21.063403] usb_generic_driver_probe+0x36/0x80
[ 21.063714] usb_probe_device+0x7b/0x130
[ 21.063936] really_probe+0x1ba/0x4c0
[ 21.064111] __driver_probe_device+0xb2/0x180
[ 21.064577] driver_probe_device+0x5a/0x100
[ 21.065019] __device_attach_driver+0xe9/0x160
[ 21.065403] ? __pfx___device_attach_driver+0x10/0x10
[ 21.065820] bus_for_each_drv+0xa9/0x100
[ 21.066094] __device_attach+0xed/0x190
[ 21.066535] device_initial_probe+0xe/0x20
[ 21.066992] bus_probe_device+0x4d/0xd0
[ 21.067250] device_add+0x308/0x590
[ 21.067501] usb_new_device+0x347/0x610
[ 21.067817] hub_event+0x156b/0x1e30
[ 21.068060] ? process_scheduled_works+0x48b/0xaf0
[ 21.068337] process_scheduled_works+0x5a3/0xaf0
[ 21.068668] worker_thread+0x3cf/0x560
[ 21.068932] ? kthread+0x109/0x1b0
[ 21.069133] kthread+0x197/0x1b0
[ 21.069343] ? __pfx_worker_thread+0x10/0x10
[ 21.069598] ? __pfx_kthread+0x10/0x10
[ 21.069908] ret_from_fork+0x32/0x40
[ 21.070169] ? __pfx_kthread+0x10/0x10
[ 21.070424] ret_from_fork_asm+0x1a/0x30
[ 21.070737] </TASK>
Cc: stable@vger.kernel.org
Reported-by: syzbot+0584f746fde3d52b4675@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0584f746fde3d52b4675
Reported-by: syzbot+dd320d114deb3f5bb79b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dd320d114deb3f5bb79b
Fixes: a3fbc2e6bb ("media: mc-entity.c: use WARN_ON, validate link pads")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240913180601.1400596-2-cascardo@igalia.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use v4l2-common helper functions to calculate bytesperline and sizeimage,
instead of calculating in a wave5 driver directly.
In case of raw(YUV) v4l2_pix_format, the wave5 driver updates
v4l2_pix_format_mplane struct through v4l2_fill_pixfmt_mp() function.
Encoder and Decoder need the same bytesperline and sizeimage values for
the same v4l2_pix_format. So, wave5_update_pix_fmt function is refactored
to support both together.
Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver bit-bangs a signal with interrupts disabled. The signal can
last for up to half a second (IR_MAX_DURATION).
A much better way of transmitting IR is using the pwm-ir-tx driver,
which does not disable interrupts.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull media updates from Mauro Carvalho Chehab:
- New CEC driver: Extron DA HD 4K Plus
- Lots of driver fixes, cleanups and improvements
* tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits)
media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode()
media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable
media: atomisp: set lock before calling vb2_queue_init()
media: atomisp: Improve binary finding debug logging
media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
media: atomisp: add missing wait_prepare/finish ops
media: atomisp: Remove unused declaration
media: atomisp: use clamp() in compute_coring()
media: atomisp: use clamp() in ia_css_eed1_8_encode()
media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output()
media: atomisp: Replace rarely used macro from math_support.h
media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h
media: atomisp: bnr: fix trailing statement
media: atomisp: move trailing */ to separate lines
media: atomisp: move trailing statement to next line.
media: atomisp: Fix trailing statement in ia_css_de.host.c
media: atomisp: Fix spelling mistakes in atomisp.h
media: atomisp: Fix spelling mistakes in atomisp_platform.h
media: atomisp: Fix spelling mistake in csi_rx_public.h
...
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on
PREEMPT_RT
- Some OF parsing simplifications"
* tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (39 commits)
pmdomain: core: Reduce debug summary table width
pmdomain: core: Move mode_status_str()
pmdomain: core: Fix "managed by" alignment in debug summary
pmdomain: core: Harden inter-column space in debug summary
pmdomain: rockchip: Add gating masks for rk3576
pmdomain: rockchip: Add gating support
pmdomain: rockchip: Simplify dropping OF node reference
pmdomain: mediatek: make use of dev_err_cast_probe()
pmdomain: imx93-pd: drop the context variable "init_off"
pmdomain: imx93-pd: don't unprepare clocks on driver remove
pmdomain: imx93-pd: replace dev_err() with dev_err_probe()
pmdomain: qcom: rpmpd: Simplify locking with guard()
pmdomain: qcom: rpmhpd: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify with dev_err_probe()
pmdomain: imx: gpcv2: Simplify with scoped for each OF child loop
pmdomain: imx: gpc: Simplify with scoped for each OF child loop
pmdomain: rockchip: SimplUlf Hanssonify locking with guard()
pmdomain: rockchip: Simplify with scoped for each OF child loop
pmdomain: qcom-cpr: Use scope based of_node_put() to simplify code.
...
Pull ARM updates from Russell King:
- clean up TTBCR magic numbers and use u32 for this register
- fix clang issue in VFP code leading to kernel oops, caused by
compiler instruction scheduling.
- switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the
arch_cpu_is_hotpluggable() hook.
- pass struct device to arm_iommu_create_mapping() and move over to use
iommu_paging_domain_alloc() rather than iommu_domain_alloc()
- make amba_bustype constant
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9418/1: dma-mapping: Use iommu_paging_domain_alloc()
ARM: 9417/1: dma-mapping: Pass device to arm_iommu_create_mapping()
ARM: 9416/1: amba: make amba_bustype constant
ARM: 9412/1: Convert to arch_cpu_is_hotpluggable()
ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu()
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
ARM: 9409/1: mmu: Do not use magic number for TTBCR settings
Add support for the Extron DA HD 4K Plus series of 4K HDMI
Distrubution Amplifiers (aka HDMI Splitters).
These devices support CEC and this driver adds support for the
CEC protocol for both the input and all outputs (2, 4 or 6 outputs,
depending on the model).
It also exports the EDID from the outputs and allows reading and
setting the EDID of the input.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move cec_get/put_device to the media/cec.h header. This
allows CEC drivers to use this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All users of ARM IOMMU mappings create them for a particular device, so
change the interface to accept the device rather than forcing a vague
indirection through a bus type. This prepares for making a similar
change to iommu_domain_alloc() itself.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
