axienet_free_tx_chain returns the number of DMA descriptors it's
handled. However, axienet_tx_poll treats the return as the number of
packets. When scatter-gather SKBs are enabled, a single packet may use
multiple DMA descriptors, which causes incorrect packet counts. Fix this
by explicitly keepting track of the number of packets processed as
separate from the DMA descriptors.
Budget does not affect the number of Tx completions we can process for
NAPI, so we use the ring size as the limit instead of budget. As we no
longer return the number of descriptors processed to axienet_tx_poll, we
now update tx_bd_ci in axienet_free_tx_chain.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240913145156.2283067-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Partial tx chechsumming is completely generic and does not depend on the
L3/L4 protocol. Signal this to the net subsystem by enabling the
more-generic offload feature (instead of restricting ourselves to
TCP/UDP over IPv4 checksumming only like is necessary with full
checksumming).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909161016.1149119-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
axienet_dma_err_handler can race with axienet_stop in the following
manner:
CPU 1 CPU 2
====================== ==================
axienet_stop()
napi_disable()
axienet_dma_stop()
axienet_dma_err_handler()
napi_disable()
axienet_dma_stop()
axienet_dma_start()
napi_enable()
cancel_work_sync()
free_irq()
Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for IFF_ALLMULTI by configuring a single filter to match the
multicast address bit. This allows us to keep promiscuous mode disabled,
even when we have more than four multicast addresses. An even better
solution would be to "pack" addresses into the available CAM registers,
but that can wait for a future series.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-6-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reading the statistics counters, if they are enabled.
The counters may be 64-bit, but we can't detect this statically as
there's no ability bit for it and the counters are read-only. Therefore,
we assume the counters are 32-bits by default. To ensure we don't miss
an overflow, we read all counters at 13-second intervals. This should be
often enough to ensure the bytes counters don't wrap at 2.5 Gbit/s.
Another complication is that the counters may be reset when the device
is reset (depending on configuration). To ensure the counters persist
across link up/down (including suspend/resume), we maintain our own
versions along with the last counter value we saw. Because we might wait
up to 100 ms for the reset to complete, we use a mutex to protect
writing hw_stats. We can't sleep in ndo_get_stats64, so we use a seqlock
to protect readers.
We don't bother disabling the refresh work when we detect 64-bit
counters. This is because the reset issue requires us to read
hw_stat_base and reset_in_progress anyway, which would still require the
seqcount. And I don't think skipping the task is worth the extra
bookkeeping.
We can't use the byte counters for either get_stats64 or
get_eth_mac_stats. This is because the byte counters include everything
in the frame (destination address to FCS, inclusive). But
rtnl_link_stats64 wants bytes excluding the FCS, and
ethtool_eth_mac_stats wants to exclude the L2 overhead (addresses and
length/type). It might be possible to calculate the byte values Linux
expects based on the frame counters, but I think it is simpler to use
the existing software counters.
get_ethtool_stats is implemented for nonstandard statistics. This
includes the aforementioned byte counters, VLAN and PFC frame
counters, and user-defined (e.g. with custom RTL) counters.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240820175343.760389-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Receive Frame Rejected interrupt is asserted whenever there was a
receive error (bad FCS, bad length, etc.) or whenever the frame was
dropped due to a mismatched address. So this is really a combination of
rx_otherhost_dropped, rx_length_errors, rx_frame_errors, and
rx_crc_errors. Mismatched addresses are common and aren't really errors
at all (much like how fragments are normal on half-duplex links). To
avoid confusion, report these events as rx_dropped. This better
reflects what's going on: the packet was received by the MAC but dropped
before being processed.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20240820175343.760389-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In axiethernet header fix register defines comment description to be
inline with IP documentation. It updates MAC configuration register,
MDIO configuration register and frame filter control description.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing blank line after declaration. Fixes below
checkpatch warnings.
WARNING: Missing a blank line after declarations
+ struct sockaddr *addr = p;
+ axienet_set_mac_address(ndev, addr->sa_data);
WARNING: Missing a blank line after declarations
+ struct axienet_local *lp = netdev_priv(ndev);
+ disable_irq(lp->tx_irq);
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace all occurences of (1<<x) by BIT(x) to get rid of checkpatch.pl
"CHECK" output "Prefer using the BIT macro".
Signed-off-by: Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240731191601.1714639-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add description of mdio enable, mdio disable and mdio wait functions.
Add description of skb pointer in axidma_bd data structure.
Remove 'phy_node' description in axienet local data structure since
it is not a valid struct member.
Correct description of struct axienet_option.
Fix below kernel-doc warnings in drivers/net/ethernet/xilinx/:
1) xilinx_axienet_mdio.c:1: warning: no structured comments found
2) xilinx_axienet.h:379: warning: Function parameter or struct member
'skb' not described in 'axidma_bd'
3) xilinx_axienet.h:538: warning: Excess struct member 'phy_node'
description in 'axienet_local'
4) xilinx_axienet.h:1002: warning: expecting prototype for struct
axiethernet_option. Prototype was for struct axienet_option instead
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240328110713.12885-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function platform_get_resource was replaced with
devm_platform_ioremap_resource_byname and is called using 0 as name.
This eventually ends up in platform_get_resource_byname in the call
stack, where it causes a null pointer in strcmp.
if (type == resource_type(r) && !strcmp(r->name, name))
It should have been replaced with devm_platform_ioremap_resource.
Fixes: bd69058f50 ("net: ll_temac: Use devm_platform_ioremap_resource_byname()")
Signed-off-by: Claus Hansen Ries <chr@terma.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/cca18f9c630a41c18487729770b492bb@terma.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add dmaengine framework to communicate with the xilinx DMAengine
driver(AXIDMA).
Axi ethernet driver uses separate channels for transmit and receive.
Add support for these channels to handle TX and RX with skb and
appropriate callbacks. Also add axi ethernet core interrupt for
dmaengine framework support.
The dmaengine framework was extended for metadata API support.
However it still needs further enhancements to make it well suited for
ethernet usecases. The ethernet features i.e ethtool set/get of DMA IP
properties, ndo_poll_controller,(mentioned in TODO) are not supported
and it requires follow-up discussions.
dmaengine support has a dependency on xilinx_dma as it uses
xilinx_vdma_channel_set_config() API to reset the DMA IP
which internally reset MAC prior to accessing MDIO.
Benchmark with netperf:
xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t TCP_STREAM
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET
to 192.168.10.20 () port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 10.02 886.69
xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t UDP_STREAM
MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET
to 192.168.10.20 () port 0 AF_INET
Socket Message Elapsed Messages
Size Size Time Okay Errors Throughput
bytes bytes secs # # 10^6bits/sec
212992 65507 10.00 15851 0 830.66
212992 10.00 15851 830.66
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1700074613-1977070-4-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The axiethernet driver has inbuilt dma programming. In order to add
dmaengine support and make it's integration seamless the current axidma
inbuilt programming code is put under use_dmaengine check.
It also performs minor code reordering to minimize conditional
use_dmaengine checks and there is no functional change. It uses
"dmas" property to identify whether it should use a dmaengine
framework or inbuilt axidma programming.
Signed-off-by: Sarath Babu Naidu Gaddam <sarath.babu.naidu.gaddam@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1700074613-1977070-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During review of the patch that became 2e0ec0afa9 ("net: ethernet:
xilinx: Convert to platform remove callback returning void") in
net-next, Radhey Shyam Pandey pointed out that the change makes the
documentation about the return value obsolete. The patch was applied
without addressing this feedback, so here comes a fix in a separate
patch.
Fixes: 2e0ec0afa9 ("net: ethernet: xilinx: Convert to platform remove callback returning void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert these drivers from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230727014944.3972546-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
64-bit DMA detection will fail if axienet was started before (by boot
loader, boot ROM, etc). In this state axienet will not start properly.
XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect
64-bit DMA capability here. But datasheet says: When DMACR.RS is 1
(axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and
is used to fetch the first descriptor. So iowrite32()/ioread32() trick
to this register to detect 64-bit DMA will not work.
So move axienet reset before 64-bit DMA detection.
Fixes: f735c40ed9 ("net: axienet: Autodetect 64-bit DMA capability")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20230622192245.116864-1-fido_max@inbox.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert fman_dtsec, xilinx_axienet and pcs-lynx to pass the neg_mode
into phylink_mii_c22_pcs_config(). Where appropriate, drivers are
updated to have neg_mode passed into their pcs_config() and
pcs_link_up() functions. For other drivers, we just hoist the call
to phylink_pcs_neg_mode() to their pcs_config() method out of
phylink_mii_c22_pcs_config().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Do-00EaFM-Ra@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge in the left-over fixes before the net-next pull-request.
net/mptcp/subflow.c
d3295fee3c ("mptcp: use proper req destructor for IPv6")
36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to
drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: bb81b2ddfa ("net: add Xilinx emac lite device driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some FPGA platforms have 80KHz MDIO bus frequency constraint when
connecting Ethernet to its on-board external Marvell PHY. Thus, we may
have to set MDIO clock according to the DT. Otherwise, use the default
2.5 MHz, as specified by 802.3, if the entry is not present.
Also, change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ because we may actually
set MDIO bus frequency higher than 2.5MHz if undelying devices support
it. And properly disable the mdio bus clock in error path.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both axienet_mdio_{enable/disable} functions are no longer used in
xilinx_axienet_main.c due to 253761a0e6. And axienet_mdio_disable is
not even used in the mdio.c. So unexport and remove them.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Virtually all conventional network drivers are now converted to use
phylink_generic_validate() - only DSA drivers and fman_memac remain,
so lets remove the necessity for network drivers to explicitly set
this member, and default to phylink_generic_validate() when unset.
This is possible as .validate must currently be set.
Any remaining instances that have not been addressed by this patch can
be fixed up later.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/E1or0FZ-001tRa-DI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
