Pull x86 platform drivers updates from Hans de Goede:
- asus-wmi: Add support for vivobook fan profiles
- dell-laptop: Add knobs to change battery charge settings
- lg-laptop: Add operation region support
- intel-uncore-freq: Add support for efficiency latency control
- intel/ifs: Add SBAF test support
- intel/pmc: Ignore all LTRs during suspend
- platform/surface: Support for arm64 based Surface devices
- wmi: Pass event data directly to legacy notify handlers
- x86/platform/geode: switch GPIO buttons and LEDs to software
properties
- bunch of small cleanups, fixes, hw-id additions, etc.
* tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
MAINTAINERS: adjust file entry in INTEL MID PLATFORM
platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
platform/mellanox: mlxbf-pmc: fix lockdep warning
platform/x86/amd: pmf: Add quirk for TUF Gaming A14
platform/x86: touchscreen_dmi: add nanote-next quirk
platform/x86: asus-wmi: don't fail if platform_profile already registered
platform/x86: asus-wmi: add debug print in more key places
platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder
platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm
MAINTAINERS: Add Intel MID section
platform/x86: panasonic-laptop: Add support for programmable buttons
platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs()
platform/x86: intel/pmc: Ignore all LTRs during suspend
platform/x86: wmi: Call both legacy and WMI driver notify handlers
platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data()
platform/x86: wmi: Remove wmi_get_event_data()
platform/x86: wmi: Pass event data directly to legacy notify handlers
platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning
platform/x86: x86-android-tablets: Fix spelling in the comments
platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
...
Add support to ignore all LTRs before suspend and restore the previous
LTR values after suspend. This feature could be turned off with module
parameter ltr_ignore_all_suspend.
LTR value is a mechanism for a device to indicate tolerance to access
the corresponding resource. When system suspends, the resource is not
available and therefore the LTR value could be ignored. Ignoring all
LTR values prevents problematic device from blocking the system to get
to the deepest package state during suspend.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240906184016.268153-1-xi.pardee@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow to disable ACPI PM Timer on suspend and enable on resume. A
disabled timer helps optimise power consumption when the system is
suspended. On resume the timer is only reactivated if it was activated
prior to suspend, so unless the ACPI PM timer is enabled in the BIOS,
this won't change anything.
The ACPI PM timer is used by Intel's iTCO/wdat_wdt watchdog to drive the
watchdog, so it doesn't need to run during suspend.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184208.1080710-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75 ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
Add efficiency latency control support to the TPMI uncore driver. This
defines two new threshold values for controlling uncore frequency, low
threshold and high threshold. When CPU utilization is below low threshold,
the user configurable floor latency control frequency can be used by the
system. When CPU utilization is above high threshold, the uncore frequency
is increased in 100MHz steps until power limit is reached.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240828153657.1296410-3-tero.kristo@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The scope of uncore control is per power domain with TPMI.
There are two types of processor topologies can be presented by CPUID
extended topology leaf irrespective of the hardware architecture:
1. A die is not enumerated in CPUID. In this case there is only one die
in a package is visible. In this case there can be multiple power domains
in a single die.
2. A power domain in a package is enumerated as a die in CPUID. So
there is one power domain per die.
To allow die level controls, the current implementation creates a root
domain and aggregates all information from power domains in it. This
is well suited for configuration 1 above.
But for configuration 2 above, the root domain will present the same
information as present by power domain. So, no use of aggregating. To
check the configuration, call topology_max_dies_per_package(). If it is
more than one, avoid creating root domain.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240820204558.1296319-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When only the last resource is invalid, tpmi_sst_dev_add() is returing
error even if there are other valid resources before. This function
should return error when there are no valid resources.
Here tpmi_sst_dev_add() is returning "ret" variable. But this "ret"
variable contains the failure status of last call to sst_main(), which
failed for the invalid resource. But there may be other valid resources
before the last entry.
To address this, do not update "ret" variable for sst_main() return
status.
If there are no valid resources, it is already checked for by !inst
below the loop and -ENODEV is returned.
Fixes: 9d1d36268f ("platform/x86: ISST: Support partitioned systems")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org # 6.10+
Link: https://lore.kernel.org/r/20240816163626.415762-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge 'platform-drivers-x86-v6.11-3' into review-hans to avoid conflicts
when merging further ideapad-laptop patches.
platform-drivers-x86 for v6.11-3
Fixes:
- ideapad-laptop / lenovo-ymc: Protect VPC calls with a mutex
- amd/pmf: Query HPD data also when ALS is disabled
The following is an automated shortlog grouped by driver:
amd/pmf:
- Fix to Update HPD Data When ALS is Disabled
ideapad-laptop:
- add a mutex to synchronize VPC commands
- introduce a generic notification chain
- move ymc_trigger_ec from lenovo-ymc
In a core, the SBAF test engine is shared between sibling CPUs.
An SBAF test image contains multiple bundles. Each bundle is further
composed of subunits called programs. When a SBAF test (for a particular
core) is triggered by the user, each SBAF bundle from the loaded test
image is executed sequentially on all the threads on the core using
the stop_core_cpuslocked mechanism. Each bundle execution is initiated by
writing to MSR_ACTIVATE_SBAF.
SBAF test bundle execution may be aborted when an interrupt occurs or
if the CPU does not have enough power budget for the test. In these
cases the kernel restarts the test from the aborted bundle. SBAF
execution is not retried if the test fails or if the test makes no
forward progress after 5 retries.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-4-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Structural Based Functional Test at Field (SBAF) is a new type of
testing that provides comprehensive core test coverage complementing
existing IFS tests like Scan at Field (SAF) or ArrayBist.
SBAF device will appear as a new device instance (intel_ifs_2) under
/sys/devices/virtual/misc. The user interaction necessary to load the
test image and test a particular core is the same as the existing scan
test (intel_ifs_0).
During the loading stage, the driver will look for a file named
ff-mm-ss-<batch02x>.sbft in the /lib/firmware/intel/ifs_2 directory.
The hardware interaction needed for loading the image is similar to
SAF, with the only difference being the MSR addresses used. Reuse the
SAF image loading code, passing the SBAF-specific MSR addresses via
struct ifs_test_msrs in the driver device data.
Unlike SAF, the SBAF test image chunks are further divided into smaller
logical entities called bundles. Since the SBAF test is initiated per
bundle, cache the maximum number of bundles in the current image, which
is used for iterating through bundles during SBAF test execution.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-3-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
IFS tests such as Scan at Field (SAF) or Structural Based Functional
Test at Field (SBAF), require the user to load a test image. The image
loading process is similar across these tests, with the only difference
being MSR addresses used. To reuse the code between these tests, remove
the hard coding of MSR addresses and allow the driver to pass the MSR
addresses per IFS test (via driver device data).
Add a new structure named "struct ifs_test_msrs" to specify the
test-specific MSR addresses. Each IFS test will provide this structure,
enabling them to reuse the common code.
This is a preliminary patch in preparation for the addition of SBAF
support.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linking an object file into multiple modules is not supported
and causes a W=1 warning:
scripts/Makefile.build:236: drivers/platform/x86/intel/int3472/Makefile: common.o is added to multiple modules: intel_skl_int3472_discrete intel_skl_int3472_tps68470
Split out the common part here into a separate module to make it
more reliable.
Fixes: a2f9fbc247 ("platform/x86: int3472: Split into 2 drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240529095009.1895618-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may
run on multiple CPU cores racing with themselves.
This race gets hit on Dell Venue 7140 tablets when undocking from
the keyboard, causing the handler to try and register priv->switches_dev
twice, as can be seen from the dev_info() message getting logged twice:
[ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
[ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17
[ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
After which things go seriously wrong:
[ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17'
...
[ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory.
[ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018
...
Protect intel-vbtn notify_handler() from racing with itself with a mutex
to fix this.
Fixes: e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs")
Reported-by: En-Wei Wu <en-wei.wu@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2073001
Tested-by: Kostadin Stoilov <kmstoilov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240729120443.14779-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf: Report system state changes using existing input events
- asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop
keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy interfaces
are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU
numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition of
C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: asus-wmi: fix TUF laptop RGB variant
platform/x86/intel/tpmi/plr: Fix output in plr_print_bits()
Docs/admin-guide: Remove pmf leftover reference from the index
platform/x86: ideapad-laptop: use cleanup.h
platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function
platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM
platform/x86/amd/pmf: Remove update system state document
platform/x86/amd/pmf: Use existing input event codes to update system states
platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops
platform/x86:intel/pmc: Add support to undo ltr_ignore
platform/x86:intel/pmc: Use the Elvis operator
platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro
platform/x86:intel/pmc: Remove unneeded min_t check
platform/x86:intel/pmc: Add support to show ltr_ignore value
platform/x86:intel/pmc: Move pmc assignment closer to first usage
platform/x86:intel/pmc: Convert index variables to be unsigned
platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers
platform/x86:intel/pmc: Use the return value of pmc_core_send_msg
tools/power/x86/intel-speed-select: v1.20 release
...
Smatch complains that 'str' can be used without being initialized:
drivers/platform/x86/intel/intel_plr_tpmi.c:178 plr_print_bits()
error: uninitialized symbol 'str'.
In this loop, we iterate over all the set bits and print the name of the
bit. The intention is that if there is a bit which is between 0-31 we
look for the name in the first array plr_coarse_reasons[] which has 10
elements. If the bit is in the 32-63 range we look for it in the
plr_fine_reasons[] array which has 30 elements. If the bit is in the
invalid ranges, 10-31 or 62-63, then we should print "UNKNOWN(%d)".
The problem is that 'str' needs to be initialized at the start of each
iteration, otherwise if we can't find the string then instead of printing
"UNKNOWN(%d)", we will re-print whatever the previous bit was.
Fixes: 9e9397a41b ("platform/x86/intel/tpmi/plr: Add support for the plr mailbox")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b0084e70-4144-445a-9b89-fb19f6b8336a@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/pmc/intel_pmc_core_pltdrv.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-hid.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-vbtn.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-rst.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-smartconnect.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-platform-x86-intel-v1-1-5ed967425b04@quicinc.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
