Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that
driver in turn depends on other things, which the k4-m4 driver didn't.
This causes a Kconfig time warning:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
because you can't select something that is unavailable.
Make the dependencies for TI_K3_M4_REMOTEPROC match those of the
OMAP2PLUS_MBOX driver that it needs.
Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
AMD-Xilinx zynqmp platform contains on-chip sram memory (OCM).
R5 cores can access OCM and access is faster than DDR memory but slower
than TCM memories available. Sram region can have optional multiple
power-domains. Platform management firmware is responsible
to operate these power-domains.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240830173735.279432-1-tanmay.shah@amd.com
[Fixed dma_addr_t type cast when calling rproc_mem_entry_init()]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
On some NXP platforms (e.g i.MX7ULP) the poweroff and reboot operations
are done via a separate remote core.
Typically Linux needs to send a message to the remote core and requests
for poweroff or reboot.
By default the communication between Linux core and the remote core is
is done via a blocking mailbox mechanism but Linux doesn't allow blocking
operations in the system off (reboot, power off) handlers.
So, we need to make sure the mailbox message send operations do not block
for this specific operations. Fortunately, Linux allows us to register
handlers that are called in preparation of the system off operations.
Thus, before carrying the power off or reboot preparations, just destroy
the existing mailboxes and create them as non-blocking.
Note that power off and restart are totally different operations and are
not complementary.
We introduce a new flag in the imx remoteproc per device data which tells
us when a device needs this special setup. For now, only imx7ulp needs it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240822-imx_rproc-v3-2-6d943723945d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Few times, core1 was scheduled to boot first before core0, which leads
to error:
'k3_r5_rproc_start: can not start core 1 before core 0'.
This was happening due to some scheduling between prepare and start
callback. The probe function waits for event, which is getting
triggered by prepare callback. To avoid above condition move event
trigger to start instead of prepare callback.
Fixes: 61f6f68447 ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
[ Applied wakeup event trigger only for Split-Mode booted rprocs ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820105004.2788327-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The AM62x and AM64x SoCs of the TI K3 family has a Cortex M4F core in
the MCU domain. This core is typically used for safety applications in a
stand alone mode. However, some application (non safety related) may
want to use the M4F core as a generic remote processor with IPC to the
host processor. The M4F core has internal IRAM and DRAM memories and are
exposed to the system bus for code and data loading.
A remote processor driver is added to support this subsystem, including
being able to load and boot the M4F core. Loading includes to M4F
internal memories and predefined external code/data memories. The
carve outs for external contiguous memory is defined in the M4F device
node and should match with the external memory declarations in the M4F
image binary. The M4F subsystem has two resets. One reset is for the
entire subsystem i.e including the internal memories and the other, a
local reset is only for the M4F processing core. When loading the image,
the driver first releases the subsystem reset, loads the firmware image
and then releases the local reset to let the M4F processing core run.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240802152109.137243-4-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-4-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use of_property_present() to test for property presence rather than
of_(find|get)_property(). This is part of a larger effort to remove
callers of of_find_property() and similar functions. of_find_property()
leaks the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-7-robh@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
If there is a resource table device tree node, use the address as
the resource table address, otherwise use the address(where
.resource_table section loaded) inside the Cortex-M elf file.
And there is an update in NXP SDK that Resource Domain Control(RDC)
enabled to protect TCM, linux not able to write the TCM space when
updating resource table status and cause kernel dump. So use the address
from device tree could avoid kernel dump.
Note: NXP M4 SDK not check resource table update, so it does not matter
use whether resource table address specified in elf file or in device
tree. But to reflect the fact that if people specific resource table
address in device tree, it means people are aware and going to use it,
not the address specified in elf file.
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240719-imx_rproc-v2-2-10d0268c7eb1@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Pull rpmsg updates from Bjorn Andersson:
- fix interrupt handling in the stm32 remoteproc driver when being
attached to an already running remote processor
- fix invalid kernel-doc and add missing MODULE_DESCRIPTION() in the
rpmsg char driver
* tag 'rpmsg-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: char: add missing MODULE_DESCRIPTION() macro
remoteproc: stm32_rproc: Fix mailbox interrupts queuing
rpmsg: char: Fix rpmsg_eptdev structure documentation
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
ret variable was used to test reset status, get from
reset_control_status() call. But this variable was overwritten by
ti_sci_proc_get_status() a few lines bellow.
And as ti_sci_proc_get_status() returns 0 or a negative value (in this
latter case, followed by a return), the expression !ret was always true,
Clearly, this was not what was intended:
In the comment above it's said that "requires both local and module
resets to be deasserted"; if reset_control_status() returns 0 it means
that the reset line is deasserted.
So, it's pretty clear that the return value of reset_control_status()
was intended to be used instead of ti_sci_proc_get_status() return
value.
This could lead in an incorrect IPC-only mode detection if reset line is
asserted (so reset_control_status() return > 0) and c_state != 0 and
halted == 0.
In this case, the old code would have detected an IPC-only mode instead
of a mismatched mode.
Fixes: 1168af40b1 ("remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20240621150058.319524-2-richard.genoud@bootlin.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The current code doesn't check whether platform_get_resource_byname()
succeeded to get the l1tcm memory, which is optional, before attempting
to map it. This results in the following error message when it is
missing:
mtk-scp 10500000.scp: error -EINVAL: invalid resource (null)
Add a check so that the remapping is only attempted if the memory region
exists. This also allows to simplify the logic handling failure to
remap, since a failure then is always a failure.
Fixes: ca23ecfdbd ("remoteproc/mediatek: support L1TCM")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240627-scp-invalid-resource-l1tcm-v1-1-7d221e6c495a@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts
number of phandles. But phandles may be empty. So of_parse_phandle() in
the parsing loop (0 < a < nph) may return NULL which is later dereferenced.
Adjust this issue by adding NULL-return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a0ff4aa6f0 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240606075204.12354-1-amishin@t-argos.ru
[Fixed title to fit within the prescribed 70-75 charcters]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When remoteproc goes down unexpectedly this results in a state where any
acquired hwspinlocks will remain locked possibly resulting in deadlock.
In order to ensure all locks are freed we include a call to
qcom_smem_bust_hwspin_lock_by_host() during remoteproc shutdown.
For qcom_q6v5_pas remoteprocs, each remoteproc has an assigned smem
host_id. Remoteproc can pass this id to smem to try and bust the lock on
remoteproc stop.
This edge case only occurs with q6v5_pas watchdog crashes. The error
fatal case has handling to clear the hwspinlock before the error fatal
interrupt is triggered.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-4-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In case of errors during core start operation from sysfs, the driver
directly returns with the -EPERM error code. Fix this to ensure that
mailbox channels are freed on error before returning by jumping to the
'put_mbox' error handling label. Similarly, jump to the 'out' error
handling label to return with required -EPERM error code during the
core stop operation from sysfs.
Fixes: 3c8a9066d5 ("remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240506141849.1735679-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second
core when the first core is in ON state. Power-state for core0 should be
equal to or higher than core1.
Therefore, prevent core1 from powering up before core0 during the start
process from sysfs. Similarly, prevent core0 from shutting down before
core1 has been shut down from sysfs.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second core
when the first core is in ON state. Power-state for core0 should be equal
to or higher than core1, else the kernel is seen hanging during rproc
loading.
Make the powering up of cores sequential, by waiting for the current core
to power-up before proceeding to the next core, with a timeout of 2sec.
Add a wait queue event in k3_r5_cluster_rproc_init call, that will wait
for the current core to be released from reset before proceeding with the
next core.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
