UAPI Changes:
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
drm-misc-next for v6.15:
Cross-subsystem Changes:
base:
- component: Provide helper to query bound status
fbdev:
- fbtft: Remove access to page->index
Core Changes:
- Fix usage of logging macros in several places
gem:
- Add test function for imported dma-bufs and use it in core and helpers
- Avoid struct drm_gem_object.import_attach
tests:
- Fix lockdep warnings
ttm:
- Add helpers for TTM shrinker
Driver Changes:
adp:
- Add support for Apple Touch Bar displays on M1/M2
amdxdna:
- Fix interrupt handling
appletbdrm:
- Add support for Apple Touch Bar displays on x86
bridge:
- synopsys: Add HDMI audio support
- ti-sn65dsi83: Support negative DE polarity
ipu-v3:
- Remove unused code
nouveau:
- Avoid multiple -Wflex-array-member-not-at-end warnings
panthor:
- Fix CS_STATUS_ defines
- Improve locking
rockchip:
- analogix_dp: Add eDP support
- lvds: Improve logging
- vop2: Improve HDMI mode handling; Add support for RK3576
- Fix shutdown
- Support rk3562-mali
xe:
- Use TTM shrinker
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306130700.GA485504@linux.fritz.box
Add SVM init / close / fini to faulting VMs. Minimual implementation
acting as a placeholder for follow on patches.
v2:
- Add close function
v3:
- Better commit message (Thomas)
- Kernel doc (Thomas)
- Update chunk array to be unsigned long (Thomas)
- Use new drm_gpusvm.h header location (Thomas)
- Newlines between functions in xe_svm.h (Thomas)
- Call drm_gpusvm_driver_set_lock in init (Thomas)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
v7:
- Only select CONFIG_DRM_GPUSVM if DEVICE_PRIVATE (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-10-matthew.brost@intel.com
Rather than relying on the TTM watermark accounting add a shrinker
for xe_bos in TT or system memory.
Leverage the newly added TTM per-page shrinking and shmem backup
support.
Although xe doesn't fully support WONTNEED (purgeable) bos yet,
introduce and add shrinker support for purgeable ttm_tts.
v2:
- Cleanups bugfixes and a KUNIT shrinker test.
- Add writeback support, and activate if kswapd.
v3:
- Move the try_shrink() helper to core TTM.
- Minor cleanups.
v4:
- Add runtime pm for the shrinker. Shrinking may require an active
device for CCS metadata copying.
v5:
- Separately purge ghost- and zombie objects in the shrinker.
- Fix a format specifier - type inconsistency. (Kernel test robot).
v7:
- s/long/s64/ (Christian König)
- s/sofar/progress/ (Matt Brost)
v8:
- Rebase on Xe KUNIT update.
- Add content verifying to the shrinker kunit test.
- Split out TTM changes to a separate patch.
- Get rid of multiple bool arguments for clarity (Matt Brost)
- Avoid an error pointer dereference (Matt Brost)
- Avoid an integer overflow (Matt Auld)
- Address misc review comments by Matt Brost.
v9:
- Fix a compliation error.
- Rebase.
v10:
- Update to new LRU walk interface.
- Rework ghost-, zombie and purged object shrinking.
- Rebase.
v11:
- Use additional TTM helpers.
- Honor __GFP_FS and __GFP_IO
- Rebase.
v13:
- Use ttm_tt_setup_backup().
v14:
- Don't set up backup on imported bos.
v15:
- Rebase on backup interface changes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-7-thomas.hellstrom@linux.intel.com
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
A new hardware feature first introduced in PVC gives capability to
periodically sample EU stall state and record counts for different stall
reasons, on a per IP basis, aggregate across all EUs in a subslice and
record the samples in a buffer in each subslice. Eventually, the aggregated
data is written out to a buffer in the memory. This feature is also
supported in XE2 and later architecture GPUs.
Use an existing IOCTL - DRM_IOCTL_XE_OBSERVATION as the interface into the
driver from the user space to do initial setup and obtain a file descriptor
for the EU stall data stream. Input parameter to the IOCTL is a struct
drm_xe_observation_param in which observation_type should be set to
DRM_XE_OBSERVATION_TYPE_EU_STALL, observation_op should be
DRM_XE_OBSERVATION_OP_STREAM_OPEN and param should point to a chain of
drm_xe_ext_set_property structures in which each structure has a pair of
property and value. The EU stall sampling input properties are defined in
drm_xe_eu_stall_property_id enum.
With the file descriptor obtained from DRM_IOCTL_XE_OBSERVATION, user space
can enable and disable EU stall sampling with the IOCTLs:
DRM_XE_OBSERVATION_IOCTL_ENABLE and DRM_XE_OBSERVATION_IOCTL_DISABLE.
User space can also call poll() to check for availability of data in the
buffer. The data can be read with read(). Finally, the file descriptor
can be closed with close().
v11: Changed a couple of variables in struct eu_stall_open_properties
from unsigned int to int.
v10: Use extension number while parsing chain of extensions.
Remove function description for static functions.
Move code around as per review feedback.
v9: Changed some u32 to unsigned int.
Moved some code around as per review feedback from v8.
v8: Used div_u64 instead of / to fix 32-bit build issue.
Changed copyright year in xe_eu_stall.c/h to 2025.
v7: Renamed input property DRM_XE_EU_STALL_PROP_EVENT_REPORT_COUNT
to DRM_XE_EU_STALL_PROP_WAIT_NUM_REPORTS to be consistent with
OA. Renamed the corresponding internal variables.
Fixed some commit messages based on review feedback.
v6: Change the input sampling rate to GPU cycles instead of
GPU cycles multiplier.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb707a27975c33e4a912b9839b023acb7a1f9c90.1740533885.git.harish.chegondi@intel.com
GuC provides support to read engine counters to calculate the
engine activity. KMD exposes two counters via the PMU interface to
calculate engine activity
Engine Active Ticks(engine-active-ticks) - active ticks of engine
Engine Total Ticks (engine-total-ticks) - total ticks of engine
Engine activity percentage can be calculated as below
Engine activity % = (engine active ticks/engine total ticks) * 100.
v2: fix cosmetic review comments
add forcewake for gpm_ts (Umesh)
v3: fix CI hooks error
change function parameters and unpin bo on error
of allocate_activity_buffers
fix kernel-doc (Umesh)
use engine activity (Umesh, Lucas)
rename xe_engine_activity to xe_guc_engine_*
fix commit message to use engine activity (Lucas, Umesh)
v4: add forcewake in PMU layer
v5: fix makefile
use drmm_kcalloc instead of kmalloc_array
remove managed bo
skip init for VF
fix cosmetic review comments (Michal)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PXP requires submissions to the HW for the following operations
1) Key invalidation, done via the VCS engine
2) Communication with the GSC FW for session management, done via the
GSCCS.
Key invalidation submissions are serialized (only 1 termination can be
serviced at a given time) and done via GGTT, so we can allocate a simple
BO and a kernel queue for it.
Submissions for session management are tied to a PXP client (identified
by a unique host_session_id); from the GSC POV this is a user-accessible
construct, so all related submission must be done via PPGTT. The driver
does not currently support PPGTT submission from within the kernel, so
to add this support, the following changes have been included:
- a new type of kernel-owned VM (marked as GSC), required to ensure we
don't use fault mode on the engine and to mark the different lock
usage with lockdep.
- a new function to map a BO into a VM from within the kernel.
v2: improve comments and function name, remove unneeded include (John)
v3: fix variable/function names in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-3-daniele.ceraolospurio@intel.com
Backmerge drm-next to get the common APIs and refactors as well as
getting the display changes from i915 in xe so the probe order can be
improved.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Boot Survivability is a software based workflow for recovering a system
in a failed boot state. Here system recoverability is concerned with
recovering the firmware responsible for boot.
This is implemented by loading the driver with bare minimum (no drm card)
to allow the firmware to be flashed through mei-gsc and collect telemetry.
The driver's probe flow is modified such that it enters survivability mode
when pcode initialization is incomplete and boot status denotes a failure.
In this mode, drm card is not exposed and presence of survivability_mode
entry in PCI sysfs is used to indicate survivability mode and
provide additional information required for debug
This patch adds initialization functions and exposes admin
readable sysfs entries
The new sysfs will have the below layout
/sys/bus/.../bdf
├── survivability_mode
v2: reorder headers
fix doc
remove survivability info and use mode to display information
use separate function for logging survivability information
for critical error (Rodrigo)
v3: use for loop
use dev logs instead of drm
use helper function for aux history(Rodrigo)
remove unnecessary error check of greater than max_scratch
as we are reading only 3 bit
v4: fix checkpatch warnings
fix space (Rodrigo)
rename register
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Ashwin Kumar Kulkarni <ashwin.kumar.kulkarni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128095632.1294722-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The CMTG is a timing generator that runs in parallel with transcoders
timing generators and can be used as a reference for synchronization.
We have observed that we are inheriting from GOP a display configuration
with the CMTG enabled. Because our driver doesn't currently implement
any CMTG sequences, the CMTG ends up still enabled after our driver
takes over.
We need to make sure that the CMTG is not enabled if we are not going to
use it. For that, let's add a partial implementation in our driver that
only cares about disabling the CMTG if it was found enabled during
initial hardware readout. In the future, we can also implement sequences
for using the CMTG if that becomes a needed feature.
For now, we only deal with cases when it is possible to disable the CMTG
without requiring a modeset. For earlier display versions, we simply
skip if we find the CMTG enabled and we can't disable it without a
proper modeset. In the future, we need to properly handle that case.
v2:
- DG2 does not have the CMTG. Update HAS_CMTG() accordingly.
- Update logic to force disabling of CMTG only for initial commit.
v3:
- Add missing changes for v2 that were staged but not committed.
v4:
- Avoid if/else duplication in intel_cmtg_dump_state() by using "n/a"
for CMTG B enabled/disabled string for platforms without it. (Jani)
- Prefer intel_cmtg_readout_hw_state() over intel_cmtg_readout_state().
(Jani)
- Use display struct instead of i915 as first parameter for
TRANS_DDI_FUNC_CTL2(). (Jani)
- Fewer continuation lines in variable declaration/initialization for
better readability. (Jani)
- Coding style improvements. (Jani)
- Use drm_dbg_kms() instead of drm_info() for logging the disabling
of the CMTG.
- Make struct intel_cmtg_state entirely private to intel_cmtg.c.
v5:
- Do the disable sequence as part of the sanitization step after
hardware readout instead of initial modeset commit. (Jani)
- Adapt to commit 1513358246 ("drm/i915/display: convert global state
to struct intel_display") by using a display struct instead of i915
as argument for intel_atomic_global_obj_init().
v6:
- Do not track CMTG state as a global state. (Ville)
- Simplify the driver logic by only disabling the CMTG only on cases
when a modeset is not required. (Ville)
v7:
- Remove the call to drm_WARN_ON() when checking
intel_cmtg_disable_requires_modeset() and use a FIXME in the comment
instead.
- Remove the !HAS_CMTG() guard from intel_cmtg_get_config(), which is
static and its caller is already protected by that same condition.
- Also take the opportunity to put some Bspec references in the commit
trailers section.
v8:
- Use HAS_TRANSCODER() instead of intel_crtc_for_pipe(). (Ville)
- Ensure transcoder power well is enabled before reading
TRANS_DDI_FUNC_CTL2. (Ville)
Bspec: 68915, 49262
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124173956.46534-1-gustavo.sousa@intel.com
Add helpers to calculate the necessary parameters for configuring the
HDMI PLL for SNPS MPLLB and C10 PHY.
The pll parameters are computed for desired pixel clock, curve data
and other inputs used for interpolation and finally stored in the
pll_state.
Currently the helper is used to compute PLLs for DG2 SNPS PHY.
Support for computing Plls for C10 PHY is added in subsequent patches.
v2:
-Used kernel types instead of C99 types. (Jani)
-Fixed styling issues and renamed few variables to more meaningful
names. (Jani)
-Added Xe make file changes. (Jani)
-Fixed build errors reported by kernel test robot
v3:
-Renamed helper to align with file name. (Jani)
v4:
-Removed erroraneous comment, and added Bspec# as part of trailer. (Suraj)
-Fixed warning flagged by kernel test robot.
Bspec: 54032
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-2-ankit.k.nautiyal@intel.com
The __to_intel_display() generics require the definition of struct
drm_i915_private i.e. inclusion of i915_drv.h. Add
intel_display_conversion.c with a __i915_to_display() function to do the
conversion without the intel_display_conversion.h having an implicit
dependency on i915_drv.h.
The long term goal is to remove __to_intel_display() and the
intel_display_conversion.[ch] files altoghether, and this is merely a
transitional step to make the dependencies on i915_drv.h explicit.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39e99b765b8c1a05d001659c39686a661ac268e2.1732104170.git.jani.nikula@intel.com
To properly support VF Save/Restore procedure, fixups need to be
applied after PF driver finishes its part of VF Restore. The fixups
are required to adjust the ongoing execution for a hardware switch
that happened, because some GFX resources are not fully virtualized,
and assigned to a VF as range from a global pool. The VF on which
a VM is restored will often have different ranges provisioned than
the VF on which save process happened. Those resource fixups are
applied by the VF driver within a restored VM.
A VF driver gets informed that it was migrated by receiving an
interrupt from each GuC. The interrupt assigned for that purpose
is "GUC SW interrupt 0". Seeing that fields set from within the
irq handler should be the trigger for fixups.
The VF can safely do post-migration fixups on resources associated
to each GuC only after that GuC issued the MIGRATED interrupt.
This change introduces a worker to be used for post-migration fixups,
and a mechanism to schedule said worker when all GuCs sent the irq.
v2: renamed and moved functions, updated logged messages, removed
unused includes, used anon struct (Michal)
v3: ordering, kerneldoc, asserts, debug messages,
on_all_tiles -> on_all_gts (Michal)
v4: fixed missing header include
v5: Explained what fixups are, explained which IRQ is used, style
fixes (Michal)
Bspec: 50868
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-2-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Add referenced registers defines and list of registers.
Update GuC ADS size allocation to include space for
the lists of error state capture register descriptors.
Then, populate GuC ADS with the lists of registers we want
GuC to report back to host on engine reset events. This list
should include global, engine-class and engine-instance
registers for every engine-class type on the current hardware.
Ensure we allocate a persistent storage for the register lists
that are populated into ADS so that we don't need to allocate
memory during GT resets when GuC is reloaded and ADS population
happens again.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-2-zhanjun.dong@intel.com
A xe_hw_engine_group is a group of hw engines. Two hw engines belong to
the same xe_hw_engine_group if one hw engine cannot make progress while
the other is stuck on a page fault.
Typically, hw engines of the same group share some resources such as EUs,
but this really depends on the hardware configuration of the platforms.
The simple engines partitioning proposed here might be too conservative
but is intended to work for existing platforms. It can be optimized later
if more sets of independent engines are identified.
The hw engine groups are intended to be used in the context of faulting
long-running jobs submissions.
v2: Move to own files, improve error handling (Matt Brost)
v3: Fix build issue reported by CI, improve commit message (Matt Roper)
v4: Fix kernel doc
v5: Add switch case for XE_ENGINE_CLASS_OTHER
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-2-francois.dugast@intel.com
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dc ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf8 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Guy Zadicario <gzadicario@habana.ai>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-2-ashutosh.dixit@intel.com
Recheck the link state after a passing link training, with a 2 sec delay
to account for cases where the link goes bad following the link training
and the sink doesn't report this via an HPD IRQ.
The delayed work added here will be also used by a later patch after a
failed link training to try to retrain the link with unchanged link
params before reducing the link params.
v2: Don't flush an uninitialized delayed work (on HDMI-only DDI ports).
v3:
- Move the helpers to a new intel_encoder.c file, rename them
accordingly. (Ville)
- Add the work to intel_encoder instead of intel_digital_port.
- Call the encoder specific link check function via an encoder hook.
- Flush the link check work during encoder destroy from
intel_dp_encoder_flush_work().
- Flush the link check work during encoder suspend as well.
v4: Call intel_encoder_link_check_init() with a valid encoder pointer.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610181428.2955658-1-imre.deak@intel.com
