The frontend exposes an API to the driver to send invalidations, handles
sequence number assignment, synchronization (fences), and provides a
timeout mechanism. The backend issues the actual invalidation to the
hardware (or firmware).
The new layering easily allows issuing TLB invalidations to different
hardware or firmware interfaces.
Normalize some naming while here too.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-10-stuart.summers@intel.com
Gfx device reports two classes of errors: uncorrectable and
correctable. Depending on the severity uncorrectable errors are further
classified Non-Fatal and Fatal.
Correctable and Non-Fatal errors: These errors are reported as MSI. Bits in
the Master Interrupt Register indicate the class of the error.
The source of the error is then read from the Device Error Source
Register.
Fatal errors: These are reported as PCIe errors
When a PCIe error is asserted, the OS will perform a SBR (Secondary
Bus reset) which causes the driver to reload. The error registers are
sticky and the values are maintained through SBR.
Add basic support to handle these errors.
Bspec: 50875, 53073, 53074, 53075, 53076
v2: Format commit message (Umesh)
v3: fix documentation (Stuart)
Cc: Stuart Summers <stuart.summers@intel.com>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250826063419.3022216-9-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This driver-specific ioctl enables UMDs to control the memory attributes
for GPU VMAs within a specified input range. If the start or end
addresses fall within an existing VMA, the VMA is split accordingly. The
attributes of the VMA are modified as provided by the users. The old
mappings of the VMAs are invalidated, and TLB invalidation is performed
if necessary.
v2(Matthew brost)
- xe_vm_in_fault_mode can't be enabled by Mesa, hence allow ioctl in non
fault mode too
- fix tlb invalidation skip for same ranges in multiple op
- use helper for tlb invalidation
- use xe_svm_notifier_lock/unlock helper
- s/lockdep_assert_held/lockdep_assert_held_write
- Add kernel-doc
v3(Matthew Brost)
- make vfunc fail safe
- Add sanitizing input args before vfunc
v4(Matthew Brost/Shuicheng)
- Make locks interruptable
- Error handling fixes
- vm_put fixes
v5(Matthew Brost)
- Flush garbage collector before any locking.
- Add check for null vma
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-9-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Requirement for PSMI capture is to have a physically contiguous buffer.
All the needed configuration is done by the userspace tool directly to
the GPU via mmio access.
This interface only support allocating from VRAM regions. For integrated
devices, the PSMI buffer is in SYSTEM memory and should be allocated by
userspace using hugetlbfs.
Here we add the ability to allocate a region of physically contiguous
memory by writing to debugfs file (listed below). For multi-tile devices,
the capture tool requires ability to allocate a capture buffer per tile
(VRAM region) and so user can specify a region_mask. The tool then
can mmap the buffers via direct mmap of the PCIBAR via sysfs.
To support the capture tool, 3 new debugfs entries are added:
psmi_capture_addr - physical address per VRAM region's capture buffer
psmi_capture_region_mask - select which region(s) to allocate a buffer
psmi_capture_size - size of current capture buffer
Writing psmi_capture_size will allocate new buffer of requested size per
region after freeing any current buffers.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Brian Welty <brian.welty@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> # v2
Link: https://lore.kernel.org/r/20250821-psmi-v5-2-34ab7550d3d8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Allow the driver to expose hardware register spaces to userspace
through GEM objects with fake mmap offsets. This can be useful
for userspace-firmware communication, debugging, etc.
v2: Minor doc fix (CI)
v3: Enforce MAP_SHARED (Tejas)
Add fault handler with dummy page (Tejas, Matt Auld)
Store physical address instead of xe_mmio in the GEM object (MattB)
v4: Separate xe_mmio_gem from xe_mmio and make it private (MattB)
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250714122658.1803-1-ilia.levi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add generic dependecy jobs / scheduler which serves as wrapper for DRM
scheduler. Useful when we want delay a generic operation until a
dma-fence signals.
Existing use cases could be destroying of resources based fences /
dma-resv, the preempt rebind worker, and pipelined GT TLB invalidations.
Written in such a way it could be moved to DRM subsystem if needed.
v3:
- Remove unnecessary cast (Staurt)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-3-matthew.brost@intel.com
While some VF/PF relay actions must be handled on the GT level,
like query for runtime registers, it was clarified by the arch
team that initial version negotiation can be done by the VF just
once, by using any available GuC/GT.
Move handling of the VF/PF ABI version negotiation on the PF side
from the GT level functions to the device level functions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250713103625.1964-7-michal.wajdeczko@intel.com
There are some workarounds that must be appplied before gt init,
wa_15015404425 for example. Instead of sprinking them conditionally
throughout the driver as we did for i915 generate an oob.rules file
reusing the RTP infrastructure to make these easier to track.
v2: rename xe_soc_wa to xe_device_wa
v5: derive prefix from argument rather than hard coding the values.
v6: split out xe_gen-wa_oob changes
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250709221605.172516-3-matthew.s.atwood@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Provide the lower level code for PIPEDMC based flip queue.
We'll use the so called semi-full flip queue mode where the
PIPEDMC will start the provided DSB on a scanline a little
ahead of the vblank. We need to program the triggering scanline
early enough so that the DSB has enough time to complete writing
all the double buffered registers before they get latched (at
start of vblank).
The firmware implements several queues:
- 3 "plane queues" which execute a single DSB per entry
- 1 "general queue" which can apparently execute 2 DSBs per entry
- 1 vestigial "fast queue" that replaced the "simple flip queue"
on ADL+, but this isn't supposed to be used due to issues.
But we only need a single plane queue really, and we won't actually
use it as a real queue because we don't allow queueing multiple commits
ahead of time. So the whole thing is perhaps useless. I suppose
there migth be some power saving benefits if we would get the flip
scheduled by userspace early and then could keep some hardware powered
off a bit longer until the DMC kicks off the flipq programming. But that
is pure speculation at this time and needs to be proven.
The code to hook up the flip queue into the actual atomic commit
path will follow later.
TODO: need to think how to do the "wait for DMC firmware load" nicely
need to think about VRR and PSR
etc.
v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl
Don't oops at flipq init if there is no dmc
v3: Adapt to PTL+ flipq changes (different queue entry
layout, different trigger event, need VRR TG)
Use the actual CDCLK frequency
Ask the DSB code how long things are expected to take
v3: Adjust the cdclk rounding (docs are 100% vague, Windows
rounds like this)
Initialize some undocumented magic DMC variables on PTL
v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in
PIPEDMC_FQ_CTRL is apparently gone on LNL+)
Based the preempt timeout on the max exec time
Preempt before disabling the flip queue
Order the PIPEDMC_SCANLINECMP* writes a bit more carefully
Fix some typos
v5: Try to deal with some clang-20 div-by-zero false positive (Nathan)
Add some docs (Jani)
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
epr
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
Core Changes:
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aADWaEFKVmxSnDLo@fedora
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
Registers a configfs subsystem called 'xe' that creates a
directory in the mounted configfs directory (/sys/kernel/config)
Userspace can then create the device that has to be configured
under the xe directory
mkdir /sys/kernel/config/xe/0000:03:00.0
The device created will have the following attributes to be
configured
/sys/kernel/config/xe/
.. 0000:03:00.0/
... survivability_mode
v2: fix kernel-doc
fix return value (Lucas)
v3: fix kernel-doc (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
UAPI Changes:
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
drm-misc-next for v6.15:
Cross-subsystem Changes:
base:
- component: Provide helper to query bound status
fbdev:
- fbtft: Remove access to page->index
Core Changes:
- Fix usage of logging macros in several places
gem:
- Add test function for imported dma-bufs and use it in core and helpers
- Avoid struct drm_gem_object.import_attach
tests:
- Fix lockdep warnings
ttm:
- Add helpers for TTM shrinker
Driver Changes:
adp:
- Add support for Apple Touch Bar displays on M1/M2
amdxdna:
- Fix interrupt handling
appletbdrm:
- Add support for Apple Touch Bar displays on x86
bridge:
- synopsys: Add HDMI audio support
- ti-sn65dsi83: Support negative DE polarity
ipu-v3:
- Remove unused code
nouveau:
- Avoid multiple -Wflex-array-member-not-at-end warnings
panthor:
- Fix CS_STATUS_ defines
- Improve locking
rockchip:
- analogix_dp: Add eDP support
- lvds: Improve logging
- vop2: Improve HDMI mode handling; Add support for RK3576
- Fix shutdown
- Support rk3562-mali
xe:
- Use TTM shrinker
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306130700.GA485504@linux.fritz.box
Add SVM init / close / fini to faulting VMs. Minimual implementation
acting as a placeholder for follow on patches.
v2:
- Add close function
v3:
- Better commit message (Thomas)
- Kernel doc (Thomas)
- Update chunk array to be unsigned long (Thomas)
- Use new drm_gpusvm.h header location (Thomas)
- Newlines between functions in xe_svm.h (Thomas)
- Call drm_gpusvm_driver_set_lock in init (Thomas)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
v7:
- Only select CONFIG_DRM_GPUSVM if DEVICE_PRIVATE (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-10-matthew.brost@intel.com
Rather than relying on the TTM watermark accounting add a shrinker
for xe_bos in TT or system memory.
Leverage the newly added TTM per-page shrinking and shmem backup
support.
Although xe doesn't fully support WONTNEED (purgeable) bos yet,
introduce and add shrinker support for purgeable ttm_tts.
v2:
- Cleanups bugfixes and a KUNIT shrinker test.
- Add writeback support, and activate if kswapd.
v3:
- Move the try_shrink() helper to core TTM.
- Minor cleanups.
v4:
- Add runtime pm for the shrinker. Shrinking may require an active
device for CCS metadata copying.
v5:
- Separately purge ghost- and zombie objects in the shrinker.
- Fix a format specifier - type inconsistency. (Kernel test robot).
v7:
- s/long/s64/ (Christian König)
- s/sofar/progress/ (Matt Brost)
v8:
- Rebase on Xe KUNIT update.
- Add content verifying to the shrinker kunit test.
- Split out TTM changes to a separate patch.
- Get rid of multiple bool arguments for clarity (Matt Brost)
- Avoid an error pointer dereference (Matt Brost)
- Avoid an integer overflow (Matt Auld)
- Address misc review comments by Matt Brost.
v9:
- Fix a compliation error.
- Rebase.
v10:
- Update to new LRU walk interface.
- Rework ghost-, zombie and purged object shrinking.
- Rebase.
v11:
- Use additional TTM helpers.
- Honor __GFP_FS and __GFP_IO
- Rebase.
v13:
- Use ttm_tt_setup_backup().
v14:
- Don't set up backup on imported bos.
v15:
- Rebase on backup interface changes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-7-thomas.hellstrom@linux.intel.com
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
A new hardware feature first introduced in PVC gives capability to
periodically sample EU stall state and record counts for different stall
reasons, on a per IP basis, aggregate across all EUs in a subslice and
record the samples in a buffer in each subslice. Eventually, the aggregated
data is written out to a buffer in the memory. This feature is also
supported in XE2 and later architecture GPUs.
Use an existing IOCTL - DRM_IOCTL_XE_OBSERVATION as the interface into the
driver from the user space to do initial setup and obtain a file descriptor
for the EU stall data stream. Input parameter to the IOCTL is a struct
drm_xe_observation_param in which observation_type should be set to
DRM_XE_OBSERVATION_TYPE_EU_STALL, observation_op should be
DRM_XE_OBSERVATION_OP_STREAM_OPEN and param should point to a chain of
drm_xe_ext_set_property structures in which each structure has a pair of
property and value. The EU stall sampling input properties are defined in
drm_xe_eu_stall_property_id enum.
With the file descriptor obtained from DRM_IOCTL_XE_OBSERVATION, user space
can enable and disable EU stall sampling with the IOCTLs:
DRM_XE_OBSERVATION_IOCTL_ENABLE and DRM_XE_OBSERVATION_IOCTL_DISABLE.
User space can also call poll() to check for availability of data in the
buffer. The data can be read with read(). Finally, the file descriptor
can be closed with close().
v11: Changed a couple of variables in struct eu_stall_open_properties
from unsigned int to int.
v10: Use extension number while parsing chain of extensions.
Remove function description for static functions.
Move code around as per review feedback.
v9: Changed some u32 to unsigned int.
Moved some code around as per review feedback from v8.
v8: Used div_u64 instead of / to fix 32-bit build issue.
Changed copyright year in xe_eu_stall.c/h to 2025.
v7: Renamed input property DRM_XE_EU_STALL_PROP_EVENT_REPORT_COUNT
to DRM_XE_EU_STALL_PROP_WAIT_NUM_REPORTS to be consistent with
OA. Renamed the corresponding internal variables.
Fixed some commit messages based on review feedback.
v6: Change the input sampling rate to GPU cycles instead of
GPU cycles multiplier.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb707a27975c33e4a912b9839b023acb7a1f9c90.1740533885.git.harish.chegondi@intel.com
GuC provides support to read engine counters to calculate the
engine activity. KMD exposes two counters via the PMU interface to
calculate engine activity
Engine Active Ticks(engine-active-ticks) - active ticks of engine
Engine Total Ticks (engine-total-ticks) - total ticks of engine
Engine activity percentage can be calculated as below
Engine activity % = (engine active ticks/engine total ticks) * 100.
v2: fix cosmetic review comments
add forcewake for gpm_ts (Umesh)
v3: fix CI hooks error
change function parameters and unpin bo on error
of allocate_activity_buffers
fix kernel-doc (Umesh)
use engine activity (Umesh, Lucas)
rename xe_engine_activity to xe_guc_engine_*
fix commit message to use engine activity (Lucas, Umesh)
v4: add forcewake in PMU layer
v5: fix makefile
use drmm_kcalloc instead of kmalloc_array
remove managed bo
skip init for VF
fix cosmetic review comments (Michal)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
PXP requires submissions to the HW for the following operations
1) Key invalidation, done via the VCS engine
2) Communication with the GSC FW for session management, done via the
GSCCS.
Key invalidation submissions are serialized (only 1 termination can be
serviced at a given time) and done via GGTT, so we can allocate a simple
BO and a kernel queue for it.
Submissions for session management are tied to a PXP client (identified
by a unique host_session_id); from the GSC POV this is a user-accessible
construct, so all related submission must be done via PPGTT. The driver
does not currently support PPGTT submission from within the kernel, so
to add this support, the following changes have been included:
- a new type of kernel-owned VM (marked as GSC), required to ensure we
don't use fault mode on the engine and to mark the different lock
usage with lockdep.
- a new function to map a BO into a VM from within the kernel.
v2: improve comments and function name, remove unneeded include (John)
v3: fix variable/function names in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-3-daniele.ceraolospurio@intel.com
Backmerge drm-next to get the common APIs and refactors as well as
getting the display changes from i915 in xe so the probe order can be
improved.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Boot Survivability is a software based workflow for recovering a system
in a failed boot state. Here system recoverability is concerned with
recovering the firmware responsible for boot.
This is implemented by loading the driver with bare minimum (no drm card)
to allow the firmware to be flashed through mei-gsc and collect telemetry.
The driver's probe flow is modified such that it enters survivability mode
when pcode initialization is incomplete and boot status denotes a failure.
In this mode, drm card is not exposed and presence of survivability_mode
entry in PCI sysfs is used to indicate survivability mode and
provide additional information required for debug
This patch adds initialization functions and exposes admin
readable sysfs entries
The new sysfs will have the below layout
/sys/bus/.../bdf
├── survivability_mode
v2: reorder headers
fix doc
remove survivability info and use mode to display information
use separate function for logging survivability information
for critical error (Rodrigo)
v3: use for loop
use dev logs instead of drm
use helper function for aux history(Rodrigo)
remove unnecessary error check of greater than max_scratch
as we are reading only 3 bit
v4: fix checkpatch warnings
fix space (Rodrigo)
rename register
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Ashwin Kumar Kulkarni <ashwin.kumar.kulkarni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128095632.1294722-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The CMTG is a timing generator that runs in parallel with transcoders
timing generators and can be used as a reference for synchronization.
We have observed that we are inheriting from GOP a display configuration
with the CMTG enabled. Because our driver doesn't currently implement
any CMTG sequences, the CMTG ends up still enabled after our driver
takes over.
We need to make sure that the CMTG is not enabled if we are not going to
use it. For that, let's add a partial implementation in our driver that
only cares about disabling the CMTG if it was found enabled during
initial hardware readout. In the future, we can also implement sequences
for using the CMTG if that becomes a needed feature.
For now, we only deal with cases when it is possible to disable the CMTG
without requiring a modeset. For earlier display versions, we simply
skip if we find the CMTG enabled and we can't disable it without a
proper modeset. In the future, we need to properly handle that case.
v2:
- DG2 does not have the CMTG. Update HAS_CMTG() accordingly.
- Update logic to force disabling of CMTG only for initial commit.
v3:
- Add missing changes for v2 that were staged but not committed.
v4:
- Avoid if/else duplication in intel_cmtg_dump_state() by using "n/a"
for CMTG B enabled/disabled string for platforms without it. (Jani)
- Prefer intel_cmtg_readout_hw_state() over intel_cmtg_readout_state().
(Jani)
- Use display struct instead of i915 as first parameter for
TRANS_DDI_FUNC_CTL2(). (Jani)
- Fewer continuation lines in variable declaration/initialization for
better readability. (Jani)
- Coding style improvements. (Jani)
- Use drm_dbg_kms() instead of drm_info() for logging the disabling
of the CMTG.
- Make struct intel_cmtg_state entirely private to intel_cmtg.c.
v5:
- Do the disable sequence as part of the sanitization step after
hardware readout instead of initial modeset commit. (Jani)
- Adapt to commit 1513358246 ("drm/i915/display: convert global state
to struct intel_display") by using a display struct instead of i915
as argument for intel_atomic_global_obj_init().
v6:
- Do not track CMTG state as a global state. (Ville)
- Simplify the driver logic by only disabling the CMTG only on cases
when a modeset is not required. (Ville)
v7:
- Remove the call to drm_WARN_ON() when checking
intel_cmtg_disable_requires_modeset() and use a FIXME in the comment
instead.
- Remove the !HAS_CMTG() guard from intel_cmtg_get_config(), which is
static and its caller is already protected by that same condition.
- Also take the opportunity to put some Bspec references in the commit
trailers section.
v8:
- Use HAS_TRANSCODER() instead of intel_crtc_for_pipe(). (Ville)
- Ensure transcoder power well is enabled before reading
TRANS_DDI_FUNC_CTL2. (Ville)
Bspec: 68915, 49262
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124173956.46534-1-gustavo.sousa@intel.com
Add helpers to calculate the necessary parameters for configuring the
HDMI PLL for SNPS MPLLB and C10 PHY.
The pll parameters are computed for desired pixel clock, curve data
and other inputs used for interpolation and finally stored in the
pll_state.
Currently the helper is used to compute PLLs for DG2 SNPS PHY.
Support for computing Plls for C10 PHY is added in subsequent patches.
v2:
-Used kernel types instead of C99 types. (Jani)
-Fixed styling issues and renamed few variables to more meaningful
names. (Jani)
-Added Xe make file changes. (Jani)
-Fixed build errors reported by kernel test robot
v3:
-Renamed helper to align with file name. (Jani)
v4:
-Removed erroraneous comment, and added Bspec# as part of trailer. (Suraj)
-Fixed warning flagged by kernel test robot.
Bspec: 54032
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-2-ankit.k.nautiyal@intel.com
