The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a973 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d0370 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit 6740ec97bc ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit 5b750b2253 ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issue/1990
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dc_state_destruct() was refactored the new phantom_stream_count
and phantom_plane_count members weren't cleared.
Fixes: 012a04b1d6 ("drm/amd/display: Refactor phantom resource allocation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When populating dml pipes, odm combine policy should be assigned based
on the pipe topology of the context passed in. DML pipes could be
repopulated multiple times during single validate bandwidth attempt. We
need to make sure that whenever we repopulate the dml pipes it is always
aligned with the updated context. There is a case where DML pipes get
repopulated during FPO optimization after ODM combine policy is changed.
Since in the current code we reinitlaize ODM combine policy, even though
the current context has ODM combine enabled, we overwrite it despite the
pipes are already split. This causes DML to think that MPC combine is
used so we mistakenly enable MPC combine because we apply pipe split
with ODM combine policy reset. This issue doesn't impact non windowed
MPO with ODM case because the legacy policy has restricted use cases. We
don't encounter the case where both ODM and FPO optimizations are
enabled together. So we decide to leave it as is because it is about to
be replaced anyway.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the
code is trying to access an element of the dc->links array that is
beyond its bounds. In C, arrays are zero-indexed, so an array with 12
elements has valid indices from 0 to 11. Trying to access dc->links[12]
would be an attempt to access the 13th element of a 12-element array,
which is a buffer overflow.
To fix this, ensure that the loop does not go beyond the last valid
index when accessing dc->links[i + 1] by subtracting 1 from the loop
condition.
This would ensure that i + 1 is always a valid index in the array.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12
Fixes: 59f1622a5f ("drm/amd/display: Add dpia display mode validation logic")
Cc: PeiChen Huang <peichen.huang@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On 14us for exit latency time causes underflow for 8K monitor with HDR on.
Increasing the latency to 28us fixes the underflow.
[How]
Increase the latency to 28us. This workaround should be sufficient
before we figure out why SR exit so long.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased
to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware
requirement will still be satisfied. Increasing min DCFCLK addresses
underflow issues (underflow occurs when phantom pipe is turned on for some
Sub-Viewport configs).
[how]
Increasing DCFCLK by raising the min_dcfclk_mhz
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because ABM will wait VStart to start getting histogram data,
it will cause we can't enter IPS while full screnn video playing.
[How]
Modify the panel refresh rate to the maximun multiple of current
refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add regkey to block video playback in IPS2 by default
Allow idle optimizations in the same spot we allow Replay for
video playback usecases.
Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Cc: stable@vger.kernel.org
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns (or errors with CONFIG_WERROR=y) when performing arithmetic
with different enumerated types, which is usually a bug:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:548:24: error: arithmetic between different enumeration types ('const enum dc_link_rate' and 'const enum dc_lane_count') [-Werror,-Wenum-enum-conversion]
548 | link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8;
| ~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~
1 error generated.
In this case, there is not a problem because the enumerated types are
basically treated as '#define' values. Add an explicit cast to an
integral type to silence the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1976
Fixes: 5f3bce1326 ("drm/amd/display: Request usb4 bw for mst streams")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When usb4 bandwidth allocation mode is enabled, driver need to request
bandwidth from connection manager. For mst link, the requested
bandwidth should be big enough for all remote streams.
[HOW]
- If mst link, the requested bandwidth should be the sum of all mst
streams bandwidth added with dp MTPH overhead.
- Allocate/deallcate usb4 bandwidth when setting dpms on/off.
- When doing display mode validation, driver also need to consider total
bandwidth of all mst streams for mst link.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If an OPP is used for a different OPTC without first being disconnected
from the previous OPTC, unexpected behaviour can occur. This also
applies to phantom pipes, which is what the current logic missed.
[How]
Disconnect OPPs from OPTC for phantom pipes before disabling OTG master.
Also move the disconnection to before the OTG master disable, since the
register is double buffered.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Panels show corruption with high refresh rate timings when ssc is
enabled.
[How]
Read down-spread percentage from lut to adjust dprefclk. Issues come
from S0i3 with this commit has been fixed by SMU.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
