Currently the teardown/setup flow for driver probe/remove is quite
a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up().
One key piece that's missing are the calls to pci_alloc_irq_vectors()
and pci_free_irq_vectors(). The pcie reset case is calling
pci_free_irq_vectors() on reset_prepare, but not calling the
corresponding pci_alloc_irq_vectors() on reset_done. This is causing
unexpected/unwanted interrupt behavior due to the adminq interrupt
being accidentally put into legacy interrupt mode. Also, the
pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being
called directly in probe/remove respectively.
Fix this inconsistency by making the following changes:
1. Always call pdsc_dev_init() in pdsc_setup(), which calls
pci_alloc_irq_vectors() and get rid of the now unused
pds_dev_reinit().
2. Always free/clear the pdsc->intr_info in pdsc_teardown()
since this structure will get re-alloced in pdsc_setup().
3. Move the calls of pci_free_irq_vectors() to pdsc_teardown()
since pci_alloc_irq_vectors() will always be called in
pdsc_setup()->pdsc_dev_init() for both the probe/remove and
reset flows.
4. Make sure to only create the debugfs "identity" entry when it
doesn't already exist, which it will in the reset case because
it's already been created in the initial call to pdsc_dev_init().
Fixes: ffa5585833 ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are multiple paths that can result in using the pdsc's
adminq.
[1] pdsc_adminq_isr and the resulting work from queue_work(),
i.e. pdsc_work_thread()->pdsc_process_adminq()
[2] pdsc_adminq_post()
When the device goes through reset via PCIe reset and/or
a fw_down/fw_up cycle due to bad PCIe state or bad device
state the adminq is destroyed and recreated.
A NULL pointer dereference can happen if [1] or [2] happens
after the adminq is already destroyed.
In order to fix this, add some further state checks and
implement reference counting for adminq uses. Reference
counting was used because multiple threads can attempt to
access the adminq at the same time via [1] or [2]. Additionally,
multiple clients (i.e. pds-vfio-pci) can be using [2]
at the same time.
The adminq_refcnt is initialized to 1 when the adminq has been
allocated and is ready to use. Users/clients of the adminq
(i.e. [1] and [2]) will increment the refcnt when they are using
the adminq. When the driver goes into a fw_down cycle it will
set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt
to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent
any further adminq_refcnt increments. Waiting for the
adminq_refcnt to hit 1 allows for any current users of the adminq
to finish before the driver frees the adminq. Once the
adminq_refcnt hits 1 the driver clears the refcnt to signify that
the adminq is deleted and cannot be used. On the fw_up cycle the
driver will once again initialize the adminq_refcnt to 1 allowing
the adminq to be used again.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-5-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The initial design for the adminq interrupt was done based
on client drivers having their own adminq and adminq
interrupt. So, each client driver's adminq isr would use
their specific adminqcq for the private data struct. For the
time being the design has changed to only use a single
adminq for all clients. So, instead use the struct pdsc for
the private data to simplify things a bit.
This also has the benefit of not dereferencing the adminqcq
to access the pdsc struct when the PDSC_S_STOPPING_DRIVER bit
is set and the adminqcq has actually been cleared/freed.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-4-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a small window where pdsc_work_thread()
calls pdsc_process_adminq() and pdsc_process_adminq()
passes the PDSC_S_STOPPING_DRIVER check and starts
to process adminq/notifyq work and then the driver
starts a fw_down cycle. This could cause some
undefined behavior if the notifyqcq/adminqcq are
free'd while pdsc_process_adminq() is running. Use
cancel_work_sync() on the adminqcq's work struct
to make sure any pending work items are cancelled
and any in progress work items are completed.
Also, make sure to not call cancel_work_sync() if
the work item has not be initialized. Without this,
traces will happen in cases where a reset fails and
teardown is called again or if reset fails and the
driver is removed.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-3-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PCIe reset handlers can run at the same time as the
health thread. This can cause the health thread to
stomp on the PCIe reset. Fix this by preventing the
health thread from running while a PCIe reset is happening.
As part of this use timer_shutdown_sync() during reset and
remove to make sure the timer doesn't ever get rearmed.
Fixes: ffa5585833 ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-2-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kfree()/vfree() internally perform NULL check on the
pointer handed to it and take no action if it indeed is
NULL. Hence there is no need for a pre-check of the memory
pointer before handing it to kfree()/vfree().
Issue reported by ifnullfree.cocci Coccinelle semantic
patch script.
Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we see a 0xff value from a PCI register read, we know that
the PCI connection is broken, possibly by a low level reset that
didn't go through the nice pci_error_handlers path.
Make use of the PCI cleanup code that we already have from the
reset handlers and add some detection and attempted recovery
from a broken PCI connection.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the callbacks for a nice PCI reset. These get called
when a user is nice enough to use the sysfs PCI reset entry, e.g.
echo 1 > /sys/bus/pci/devices/0000:2b:00.0/reset
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to what we do in the AdminQ, check for devcmd health
while waiting for an answer.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
Fix some kernel-doc comments to silence the warnings:
drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Function parameter or member 'pf' not described in 'pds_client_register'
drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Excess function parameter 'pf_pdev' description in 'pds_client_register'
drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Function parameter or member 'pf' not described in 'pds_client_unregister'
drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Excess function parameter 'pf_pdev' description in 'pds_client_unregister'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
do_pci_disable_device() disable PCI bus-mastering as following:
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}
And pci_disable_device() sets dev->is_busmaster to 0.
pci_enable_device() is called only once before calling to
pci_disable_device() and such pci_clear_master() is not needed. So remove
redundant pci_clear_master().
Also rename goto label 'err_out_clear_master' to 'err_out_disable_device'.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230817025709.2023553-1-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 523847df1b ("pds_core: add devcmd device interfaces") included
initial support for FW recovery detection. Unfortunately, the ordering
in pdsc_is_fw_good() was incorrect, which was causing FW recovery to be
undetected by the driver. Fix this by making sure to update the cached
fw_status by calling pdsc_is_fw_running() before setting the local FW
gen.
Fixes: 523847df1b ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230605195116.49653-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This cruft from previous drafts should have been removed when
the code was updated to not use the old style dummy helpers.
Fixes: 55435ea772 ("pds_core: initial framework for pds_core PF driver")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the Core device gets an event from the device, or notices
the device FW to be up or down, it needs to send those events
on to the clients that have an event handler. Add the code to
pass along the events to the clients.
The entry points pdsc_register_notify() and pdsc_unregister_notify()
are EXPORTed for other drivers that want to listen for these events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the client API operations for running adminq commands.
The core registers the client with the FW, then the client
has a context for requesting adminq services. We expect
to add additional operations for other clients, including
requesting additional private adminqs and IRQs, but don't have
the need yet.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the devlink parameter switches so the user can enable
the features supported by the VFs. The only feature supported
at the moment is vDPA.
Example:
devlink dev param set pci/0000:2b:00.0 \
name enable_vnet cmode runtime value true
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
An auxiliary_bus device is created for each vDPA type VF at VF
probe and destroyed at VF remove. The aux device name comes
from the driver name + VIF type + the unique id assigned at PCI
probe. The VFs are always removed on PF remove, so there should
be no issues with VFs trying to access missing PF structures.
The auxiliary_device names will look like "pds_core.vDPA.nn"
where 'nn' is the VF's uid.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the initial VF PCI driver framework for the new
pds_vdpa VF device, which will work in conjunction with an
auxiliary_bus client of the pds_core driver. This does the
very basics of registering for the new VF device, setting
up debugfs entries, and registering with devlink.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Virtual Interfaces (VIFs) supported by the DSC's
configuration (vDPA, Eth, RDMA, etc) are reported in the
dev_ident struct and made visible in debugfs. At this point
only vDPA is supported in this driver so we only setup
devices for that feature.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add in the support for doing firmware updates. Of the two
main banks available, a and b, this updates the one not in
use and then selects it for the next boot.
Example:
devlink dev flash pci/0000:b2:00.0 \
file pensando/dsc_fw_1.63.0-22.tar
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the service routines for submitting and processing
the adminq messages and for handling notifyq events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the basic adminq and notifyq queue structures. These are
used mostly by the client drivers for feature configuration.
These are essentially the same adminq and notifyq as in the
ionic driver.
Part of this includes querying for device identity and FW
information, so we can make that available to devlink dev info.
$ devlink dev info pci/0000:b5:00.0
pci/0000:b5:00.0:
driver pds_core
serial_number FLM18420073
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw 1.51.0-73
stored:
fw.goldfw 1.15.9-C-22
fw.mainfwa 1.60.0-73
fw.mainfwb 1.60.0-57
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink health reporting on top of our fw watchdog.
Example:
# devlink health show pci/0000:2b:00.0 reporter fw
pci/0000:2b:00.0:
reporter fw
state healthy error 0 recover 0
# devlink health diagnose pci/0000:2b:00.0 reporter fw
Status: healthy State: 1 Generation: 0 Recoveries: 0
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add in the periodic health check and the related workqueue,
as well as the handlers for when a FW reset is seen.
The firmware is polled every 5 seconds to be sure that it is
still alive and that the FW generation didn't change.
The alive check looks to see that the PCI bus is still readable
and the fw_status still has the RUNNING bit on. If not alive,
the driver stops activity and tears things down. When the FW
recovers and the alive check again succeeds, the driver sets
back up for activity.
The generation check looks at the fw_generation to see if it
has changed, which can happen if the FW crashed and recovered
or was updated in between health checks. If changed, the
driver counts that as though the alive test failed and forces
the fw_down/fw_up cycle.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devcmd interface is the basic connection to the device through the
PCI BAR for low level identification and command services. This does
the early device initialization and finds the identity data, and adds
devcmd routines to be used by later driver bits.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the initial PCI driver framework for the new pds_core device
driver and its family of devices. This does the very basics of
registering for the new PF PCI device 1dd8:100c, setting up debugfs
entries, and registering with devlink.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
