Jisheng Zhang <jszhang@kernel.org> says:
Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.
Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.
This also pulls in -rc2, because of some maintainers re-jigging that
went on in the interim in commit 80e62bc848 ("MAINTAINERS: re-sort
all entries and fields").
Link: https://lore.kernel.org/r/20230617161529.2092-1-jszhang@kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
While "real" hardware might not use the compatible string "riscv,plic0"
it is present in the driver & QEMU uses it for automatically generated
virt machine dtbs. To avoid dt-validate problems with QEMU produced
dtbs, such as the following, add it to the binding.
riscv-virt.dtb: plic@c000000: compatible: 'oneOf' conditional failed, one must be fixed:
'sifive,plic-1.0.0' is not one of ['sifive,fu540-c000-plic', 'starfive,jh7100-plic', 'canaan,k210-plic']
'sifive,plic-1.0.0' is not one of ['allwinner,sun20i-d1-plic']
'sifive,plic-1.0.0' was expected
'thead,c900-plic' was expected
riscv-virt.dtb: plic@c000000: '#address-cells' is a required property
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220823183319.3314940-3-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RISC-V PLIC specification unfortunately allows PLIC implementations
to ignore edges seen while an edge-triggered interrupt is being handled:
Depending on the design of the device and the interrupt handler,
in between sending an interrupt request and receiving notice of its
handler’s completion, the gateway might either ignore additional
matching edges or increment a counter of pending interrupts.
Like the NCEPLIC100, the T-HEAD C900 PLIC also has this behavior. Thus
it also needs to inform software about each interrupt's trigger type, so
the driver can use the right interrupt flow.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-4-samuel@sholland.org
Renesas RZ/Five (R9A07G043) SoC is equipped with NCEPLIC100 RISC-V
platform level interrupt controller from Andes Technology. NCEPLIC100
ignores subsequent EDGE interrupts until the previous EDGE interrupt is
completed, due to this issue we have to follow different interrupt flow
for EDGE and LEVEL interrupts.
This patch documents Renesas RZ/Five (R9A07G043) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-2-samuel@sholland.org
Pull irqchip fixes from Marc Zyngier:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
Add the compatible string "canaan,k210-plic" to the Sifive plic bindings
to indicate the use of the "sifive,plic-1.0.0" IP block in the Canaan
Kendryte K210 SoC. The description is also updated to reflect this
change, that is, that SoCs from other vendors may also use this plic
implementation.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
