KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Add yet another macro to the VM/vCPU ioctl() framework to detect when an
ioctl() failed because KVM killed/bugged the VM, i.e. when there was
nothing wrong with the ioctl() itself. If KVM kills a VM, e.g. by way of
a failed KVM_BUG_ON(), all subsequent VM and vCPU ioctl()s will fail with
-EIO, which can be quite misleading and ultimately waste user/developer
time.
Use KVM_CHECK_EXTENSION on KVM_CAP_USER_MEMORY to detect if the VM is
dead and/or bug, as KVM doesn't provide a dedicated ioctl(). Using a
heuristic is obviously less than ideal, but practically speaking the logic
is bulletproof barring a KVM change, and any such change would arguably
break userspace, e.g. if KVM returns something other than -EIO.
Without the detection, tearing down a bugged VM yields a cryptic failure
when deleting memslots:
==== Test Assertion Failure ====
lib/kvm_util.c:689: !ret
pid=45131 tid=45131 errno=5 - Input/output error
1 0x00000000004036c3: __vm_mem_region_delete at kvm_util.c:689
2 0x00000000004042f0: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402929: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cab: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000416f13: __libc_start_call_main at libc-start.o:?
6 0x000000000041855f: __libc_start_main_impl at ??:?
7 0x0000000000401d40: _start at ??:?
KVM_SET_USER_MEMORY_REGION failed, rc: -1 errno: 5 (Input/output error)
Which morphs into a more pointed error message with the detection:
==== Test Assertion Failure ====
lib/kvm_util.c:689: false
pid=80347 tid=80347 errno=5 - Input/output error
1 0x00000000004039ab: __vm_mem_region_delete at kvm_util.c:689 (discriminator 5)
2 0x0000000000404660: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402ac9: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cb7: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000418263: __libc_start_call_main at libc-start.o:?
6 0x00000000004198af: __libc_start_main_impl at ??:?
7 0x0000000000401d90: _start at ??:?
KVM killed/bugged the VM, check the kernel log for clues
Suggested-by: Michal Luczaj <mhal@rbox.co>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20231108010953.560824-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to invoke KVM_SET_USER_MEMORY_REGION2 directly so that tests
can validate of features that are unique to "version 2" of "set user
memory region", e.g. do negative testing on gmem_fd and gmem_offset.
Provide a raw version as well as an assert-success version to reduce
the amount of boilerplate code need for basic usage.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-33-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "vm_shape" structure to encapsulate the selftests-defined "mode",
along with the KVM-defined "type" for use when creating a new VM. "mode"
tracks physical and virtual address properties, as well as the preferred
backing memory type, while "type" corresponds to the VM type.
Taking the VM type will allow adding tests for KVM_CREATE_GUEST_MEMFD
without needing an entirely separate set of helpers. At this time,
guest_memfd is effectively usable only by confidential VM types in the
form of guest private memory, and it's expected that x86 will double down
and require unique VM types for TDX and SNP guests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to convert memory between private and shared via KVM's
memory attributes, as well as helpers to free/allocate guest_memfd memory
via fallocate(). Userspace, i.e. tests, is NOT required to do fallocate()
when converting memory, as the attributes are the single source of truth.
Provide allocate() helpers so that tests can mimic a userspace that frees
private memory on conversion, e.g. to prioritize memory usage over
performance.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-28-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for creating "private" memslots via KVM_CREATE_GUEST_MEMFD and
KVM_SET_USER_MEMORY_REGION2. Make vm_userspace_mem_region_add() a wrapper
to its effective replacement, vm_mem_add(), so that private memslots are
fully opt-in, i.e. don't require update all tests that add memory regions.
Pivot on the KVM_MEM_PRIVATE flag instead of the validity of the "gmem"
file descriptor so that simple tests can let vm_mem_add() do the heavy
lifting of creating the guest memfd, but also allow the caller to pass in
an explicit fd+offset so that fancier tests can do things like back
multiple memslots with a single file. If the caller passes in a fd, dup()
the fd so that (a) __vm_mem_region_delete() can close the fd associated
with the memory region without needing yet another flag, and (b) so that
the caller can safely close its copy of the fd without having to first
destroy memslots.
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-27-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KVM_SET_USER_MEMORY_REGION2 throughout KVM's selftests library so that
support for guest private memory can be added without needing an entirely
separate set of helpers.
Note, this obviously makes selftests backwards-incompatible with older KVM
versions from this point forward.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-26-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_userspace_memory_region_find(), it's unused and a terrible API
(probably why it's unused). If anything outside of kvm_util.c needs to
get at the memslot, userspace_mem_region_find() can be exposed to give
others full access to all memory region/slot information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-25-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add additional pages to the guest to account for the number of pages
the ucall headers need. The only reason things worked before is the
ucall headers are fairly small. If they were ever to increase in
size the guest could run out of memory.
This is done in preparation for adding string formatting options to
the guest through the ucall framework which increases the size of
the ucall headers.
Fixes: 426729b2cf ("KVM: selftests: Add ucall pool based implementation")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230729003643.1053367-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is already an ASSERT_EQ macro in the file
tools/testing/selftests/kselftest_harness.h, so currently KVM selftests
can't include test_util.h from the KVM selftests together with that file.
Rename the macro in the KVM selftests to TEST_ASSERT_EQ to avoid the
problem - it is also more similar to the other macros in test_util.h that
way.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230712075910.22480-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Mimic the dirty log test and allow the user to pin demand paging test
tasks to physical CPUs.
Put the help message into a general helper as suggested by Sean.
Signed-off-by: Peter Xu <peterx@redhat.com>
[sean: rebase, tweak arg ordering, add "print" to helper, print program name]
Link: https://lore.kernel.org/r/20230607001226.1398889-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM selftests changes for 6.3:
- Cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct
hypercall instruction instead of relying on KVM to patch in VMMCALL
- A variety of one-off cleanups and fixes
Hyper-V extended hypercalls by default exit to userspace. Verify
userspace gets the call, update the result and then verify in guest
correct result is received.
Add KVM_EXIT_HYPERV to list of "known" hypercalls so errors generate
pretty strings.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221212183720.4062037-14-vipinsh@google.com
[sean: add KVM_EXIT_HYPERV to exit_reasons_known]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The loop marks vaddr as mapped after incrementing it by page size,
thereby marking the *next* page as mapped. Set the bit in vpages_mapped
first instead.
Fixes: 56fc773203 ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap.
These correspond to the "canonical addresses" of x86 and other
architectures, but that is not obvious.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An interesting feature of the Arm architecture is that the stage-1 MMU
supports two distinct VA regions, controlled by TTBR{0,1}_EL1. As KVM
selftests on arm64 only uses TTBR0_EL1, the VA space is constrained to
[0, 2^(va_bits-1)). This is different from other architectures that
allow for addressing low and high regions of the VA space from a single
page table.
KVM selftests' VA space allocator presumes the valid address range is
split between low and high memory based the MSB, which of course is a
poor match for arm64's TTBR0 region.
Allow architectures to override the default VA space layout. Make use of
the override to align vpages_valid with the behavior of TTBR0 on arm64.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221207214809.489070-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently, tests can only request a new vaddr range by using
vm_vaddr_alloc()/vm_vaddr_alloc_page()/vm_vaddr_alloc_pages() but
these functions allocate and map physical pages too. Make it possible
to request unmapped range too.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-36-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do init_ucall() automatically during VM creation to kill two (three?)
birds with one stone.
First, initializing ucall immediately after VM creations allows forcing
aarch64's MMIO ucall address to immediately follow memslot0. This is
still somewhat fragile as tests could clobber the MMIO address with a
new memslot, but it's safe-ish since tests have to be conversative when
accounting for memslot0. And this can be hardened in the future by
creating a read-only memslot for the MMIO page (KVM ARM exits with MMIO
if the guest writes to a read-only memslot). Add a TODO to document that
selftests can and should use a memslot for the ucall MMIO (doing so
requires yet more rework because tests assumes thay can use all memslots
except memslot0).
Second, initializing ucall for all VMs prepares for making ucall
initialization meaningful on all architectures. aarch64 is currently the
only arch that needs to do any setup, but that will change in the future
by switching to a pool-based implementation (instead of the current
stack-based approach).
Lastly, defining the ucall MMIO address from common code will simplify
switching all architectures (except s390) to a common MMIO-based ucall
implementation (if there's ever sufficient motivation to do so).
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-4-seanjc@google.com
Add a command line option, -c, to pin vCPUs to physical CPUs (pCPUs),
i.e. to force vCPUs to run on specific pCPUs.
Requirement to implement this feature came in discussion on the patch
"Make page tables for eager page splitting NUMA aware"
https://lore.kernel.org/lkml/YuhPT2drgqL+osLl@google.com/
This feature is useful as it provides a way to analyze performance based
on the vCPUs and dirty log worker locations, like on the different NUMA
nodes or on the same NUMA nodes.
To keep things simple, implementation is intentionally very limited,
either all of the vCPUs will be pinned followed by an optional main
thread or nothing will be pinned.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-8-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_vm allows specifying different memslots for code, page tables,
and data, use the appropriate memslot when making allocations in
common/libraty code. Change them accordingly:
- code (allocated by lib/elf) use the CODE memslot
- stacks, exception tables, and other core data pages (like the TSS in x86)
use the DATA memslot
- page tables and the PGD use the PT memslot
- test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA
memslot
No functional change intended. All allocators keep using memslot #0.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-10-ricarkol@google.com
The vm_create() helpers are hardcoded to place most page types (code,
page-tables, stacks, etc) in the same memslot #0, and always backed with
anonymous 4K. There are a couple of issues with that. First, tests
willing to differ a bit, like placing page-tables in a different backing
source type must replicate much of what's already done by the vm_create()
functions. Second, the hardcoded assumption of memslot #0 holding most
things is spread everywhere; this makes it very hard to change.
Fix the above issues by having selftests specify how they want memory to be
laid out. Start by changing ____vm_create() to not create memslot #0; a
test (to come) will specify all memslots used by the VM. Then, add the
vm->memslots[] array to specify the right memslot for different memory
allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot.
This will be used as a way to specify the page-tables memslots (to be
backed by huge pages for example).
There is no functional change intended. The current commit lays out memory
exactly as before. A future commit will change the allocators to get the
region they should be using, e.g.,: like the page table allocators using
the pt memslot.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-8-ricarkol@google.com
In vcpu_map_dirty_ring(), the guest's page size is used to figure out
the offset in the virtual area. It works fine when we have same page
sizes on host and guest. However, it fails when the page sizes on host
and guest are different on arm64, like below error messages indicates.
# ./dirty_log_test -M dirty-ring -m 7
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
==== Test Assertion Failure ====
lib/kvm_util.c:1477: addr == MAP_FAILED
pid=9000 tid=9000 errno=0 - Success
1 0x0000000000405f5b: vcpu_map_dirty_ring at kvm_util.c:1477
2 0x0000000000402ebb: dirty_ring_collect_dirty_pages at dirty_log_test.c:349
3 0x00000000004029b3: log_mode_collect_dirty_pages at dirty_log_test.c:478
4 (inlined by) run_test at dirty_log_test.c:778
5 (inlined by) run_test at dirty_log_test.c:691
6 0x0000000000403a57: for_each_guest_mode at guest_modes.c:105
7 0x0000000000401ccf: main at dirty_log_test.c:921
8 0x0000ffffb06ec79b: ?? ??:0
9 0x0000ffffb06ec86b: ?? ??:0
10 0x0000000000401def: _start at ??:?
Dirty ring mapped private
Fix the issue by using host's page size to map the ring buffer.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-6-gshan@redhat.com
KVM/arm64 updates for v6.1
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
Add helper functions for reading the value of kvm_intel and kvm_amd
boolean module parameters. Use the kvm_intel variant in
vm_is_unrestricted_guest() to simplify the check for
kvm_intel.unrestricted_guest.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220929181207.2281449-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the
mess where tests, often unknowingly, modify the global/static "cpuid"
allocated by kvm_get_supported_cpuid().
Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID
model, e.g. during vCPU creation or when switching to the Hyper-V enabled
CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that
any adjustments made by KVM are always reflected in the cache. Drop
vcpu_get_cpuid() entirely to force tests to use the cache, and to allow
adding e.g. vcpu_get_cpuid_entry() in the future without creating a
conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but
vcpu_get_cpuid_entry() does not.
Opportunistically convert the VMX nested state test and KVM PV test to
manipulating the vCPU's CPUID (because it's easy), but use
vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test
to effectively retain their current behavior as they're less trivial to
convert.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-19-seanjc@google.com
On x86-64, set KVM's supported CPUID as the vCPU's CPUID when recreating
a VM+vCPU to deduplicate code for state save/restore tests, and to
provide symmetry of sorts with respect to vm_create_with_one_vcpu(). The
extra KVM_SET_CPUID2 call is wasteful for Hyper-V, but ultimately is
nothing more than an expensive nop, and overriding the vCPU's CPUID with
the Hyper-V CPUID information is the only known scenario where a state
save/restore test wouldn't need/want the default CPUID.
Opportunistically use __weak for the default vm_compute_max_gfn(), it's
provided by tools' compiler.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-2-seanjc@google.com
There's currently no test coverage of NX hugepages in KVM selftests, so
add a basic test to ensure that the feature works as intended.
The test creates a VM with a data slot backed with huge pages. The
memory in the data slot is filled with op-codes for the return
instruction. The guest then executes a series of accesses on the memory,
some reads, some instruction fetches. After each operation, the guest
exits and the test performs some checks on the backing page counts to
ensure that NX page splitting an reclaim work as expected.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats data to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
Also opportunistically remove an unnecessary calculation with
"size_data" in stats_test.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a duplicate TEST_ASSERT() on the number of runnable vCPUs in
vm_nr_pages_required() that snuck in during a rebase gone bad.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 6e1d13bf38 ("KVM: selftests: Move per-VM/per-vCPU nr pages calculation to __vm_create()")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a static assert to the KVM/VM/vCPU ioctl() helpers to verify that the
size of the argument provided matches the expected size of the IOCTL.
Because ioctl() ultimately takes a "void *", it's all too easy to pass in
garbage and not detect the error until runtime. E.g. while working on a
CPUID rework, selftests happily compiled when vcpu_set_cpuid()
unintentionally passed the cpuid() function as the parameter to ioctl()
(a local "cpuid" parameter was removed, but its use was not replaced with
"vcpu->cpuid" as intended).
Tweak a variety of benign issues that aren't compatible with the sanity
check, e.g. passing a non-pointer for ioctls().
Note, static_assert() requires a string on older versions of GCC. Feed
it an empty string to make the compiler happy.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded
instances of selftests exiting with KSFT_SKIP after printing an
informational message. In addition to reducing the amount of boilerplate
code in selftests, the UPPERCASE macro names make it easier to visually
identify a test's requirements.
Convert usage that erroneously uses something other than print_skip()
and/or "exits" with '0' or some other non-KSFT_SKIP value.
Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part
of the conversion. All memory and file descriptors are freed on process
exit, so the explicit free is superfluous.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use
cases where the caller only wants check if a capability is supported,
i.e. doesn't care about the value beyond whether or not it's non-zero.
The "check" terminology is somewhat ambiguous as the non-boolean return
suggests that '0' might mean "success", i.e. suggests that the ioctl uses
the 0/-errno pattern. Provide a wrapper instead of trying to find a new
name for the raw helper; the "check" terminology is derived from the name
of the ioctl, so using e.g. "get" isn't a clear win.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
